Correcting ozone biases in a global chemistry–climate model: implications for future ozone
Weaknesses in process representation in chemistry–climate models lead to biases in simulating surface ozone and to uncertainty in projections of future ozone change. We here develop a deep learning model to demonstrate the feasibility of ozone bias correction in a global chemistry–climate model. We apply this approach to identify the key factors causing ozone biases and to correct projections of future surface ozone. Temperature and the related geographic variables latitude and month show the strongest relationship with ozone biases. This indicates that ozone biases are sensitive to temperature and suggests weaknesses in representation of temperature-sensitive physical or chemical processes. Photolysis rates are also an important factor, highlighting the sensitivity of biases to simulated cloud cover and insolation. Atmospheric chemical species such as the hydroxyl radical, nitric acid and peroxyacyl nitrate show strong positive relationships with ozone biases on a regional scale. These relationships reveal the conditions under which ozone biases occur, although they reflect association rather than direct causation. We correct model projections of future ozone under different climate and emission scenarios following the shared socio-economic pathways. We find that changes in seasonal ozone mixing ratios from the present day to the future are generally smaller than those simulated without bias correction, especially in high-emission regions. This suggests that the ozone sensitivity to changing emissions and climate may be overestimated with chemistry–climate models. Given the uncertainty in simulating future ozone, we show that deep learning approaches can provide improved assessment of the impacts of climate and emission changes on future air quality, along with valuable information to guide future model development.
Atmospheric chemical transport models have been developed over several decades with the principal purpose of simulating the composition of the atmosphere (Zhang, 2008), and chemistry schemes have been incorporated in chemistry–climate and earth system models to investigate the interactions between atmospheric composition and climate change (Flato, 2011). However, current chemistry–climate models are imperfect in simulating the concentration of atmospheric chemical species, even though they represent our latest understanding of the governing physical and chemical processes. Biases obtained through comparison with observations indicate that not all relevant processes can be adequately represented in models, and there are uncertainties associated with emissions, chemistry, transport, deposition, clouds and aerosols, in addition to structural errors associated with model resolution (Knutti and Sedláček, 2013; Archibald et al., 2020a). Representation of these processes may be biased due to poor understanding and simplified parameterisation, and the errors may propagate in complex earth system models.
While some models reproduce observed concentrations relatively well, this does not confirm that they represent the governing processes well, because biases arising from different processes may offset each other. Different models apply differing parameterisations of key processes, and even where these reflect current understanding, there may be large differences in model responses to changing conditions (Wild et al., 2020). This may lead to unreliable projections of changes in atmospheric composition under future emission and climate scenarios. However, it is difficult to identify the origin of biases in models, and this severely hinders model improvement and prevents a full understanding of the interactions between chemistry and climate through the earth system.
Tropospheric ozone (O3) is an important greenhouse gas affecting climate and is a photochemical air pollutant at the earth's surface, damaging human health and ecosystems (Archibald et al., 2020a). Many studies show that the magnitude of the tropospheric O3 burden and surface O3 concentrations in remote areas can be simulated relatively well (Young et al., 2018; Griffiths et al., 2021). However, large differences still exist in simulated surface O3 concentrations in high-emission areas (Turnock et al., 2020), and there are large uncertainties in temporal trends (Tarasick et al., 2019) that cannot be captured well by global chemistry–climate models (Parrish et al., 2021). In addition, structural biases in O3 caused by coarse model resolution are hard to eliminate and typically lead to higher surface O3 concentrations in polluted areas (Wild and Prather, 2006; Stock et al., 2014). Given the difficulty in resolving O3 biases in a complex chemistry–climate model, the aim of this study is to correct simulations of present-day surface O3 concentrations across the globe and to generate more reliable O3 projections under future scenarios.
Machine learning provides a valuable approach to correct O3 biases. Appropriate algorithms can be applied to identify the relationships between model responses and the driving variables based on extensive training. Deep learning approaches apply algorithms with more complex architectures and larger parameter spaces based on artificial neural networks (Goodfellow et al., 2016). In atmospheric science, machine learning has been successfully applied in some fields such as prediction of precipitation (Sønderby et al., 2020; Ravuri et al., 2021) and air pollution (Kleinert et al., 2021). Numerical approaches used in solving ordinary and partial differential equations in chemical and dynamic systems (Han et al., 2018; Keller and Evans, 2019), and in parameterising subgrid processes for clouds in climate models (Rasp et al., 2018), can also be replaced by machine learning to reduce computational costs. However, reliance on machine learning approaches to make predictions may lead to loss of interpretability of the results. We therefore choose an approach based on physical model variables that allows us to extract the importance of these variables and thus derive some physical insight into the performance of the chemistry–climate model.
In this study, we explore the application of deep learning to correct surface O3 biases in a global chemistry–climate model, and we apply it for the first time to improve projections of changes in O3 under future scenarios. We identify the dominant factors leading to O3 biases with the aim of guiding future model development. We introduce the chemistry–climate model, present-day and future scenarios, and the deep learning model in Sect. 2. We demonstrate the performance of the deep learning model in Sect. 3. We show the importance of different variables to O3 biases in Sect. 4, and how these vary by region in Sect. 5. We quantify surface O3 biases in the present day and the future in Sect. 6, and show the importance for assessment of future O3 changes in Sect. 7. We present our conclusions in Sect. 8.
2.1 Chemistry–climate model and experiments
We use version 1 of the United Kingdom Earth System Model, UKESM1 (Sellar et al., 2019), to simulate present-day (2004–2014) and future (2045–2055) surface O3 mixing ratios under different emission and climate pathways. UKESM1 consists of a physical climate model, the Hadley Centre Global Environment Model version 3 (HadGEM3), with the Global Atmosphere 7.1 and Global Land 7.0 (GA7.1/GL7.0) configurations (Walters et al., 2019) for atmosphere-only simulations with prescribed sea surface temperatures, sea ice and greenhouse gas concentrations generated from the fully coupled UKESM1 (Meinshausen et al., 2017, 2020). Atmospheric composition is modelled with a state-of-the-art chemistry and aerosol module, the United Kingdom Chemistry and Aerosol model (UKCA; O'Connor et al., 2014), including a stratosphere–troposphere gas-phase chemistry scheme (StratTrop; Archibald et al., 2020b) and an aerosol scheme (GLOMAP-mode; Mulcahy et al., 2020). An extended chemistry scheme incorporating more reactive volatile organic compounds (VOCs) is used in this study to provide an improved representation of O3 production environments (Liu et al., 2021). The model resolution is N96L85 in the atmosphere, with 1.875∘ in longitude by 1.25∘ in latitude, 85 terrain-following hybrid height layers and a model top at 85 km.
For present-day simulations, we use the Coupled-Model Intercomparison Project Phase 6 (CMIP6; Eyring et al., 2016) historical anthropogenic and biomass emissions from Hoesly et al. (2018) and Van Marle et al. (2017), respectively. Biogenic VOC emissions are calculated interactively in the Joint UK Land Environmental Simulator (JULES) land-surface scheme (Pacifico et al., 2011), which is coupled to UKCA. For future simulations, we use the shared socio-economic pathways (SSPs; O’Neill et al., 2014), which represent different pathways of emission and climate policies in the future accounting for social, economic and environmental development (Rao et al., 2017). We choose the SSP3-7.0 and SSP3-7.0-lowNTCF pathways to demonstrate the impacts of weak and strong air pollutant emission controls in the future, respectively. Both pathways lead to a warmer and more humid climate, but SSP3-7.0-lowNTCF has large reductions in anthropogenic emissions of near-term climate forcer (NTCF) species that include O3 precursors and aerosols. Details of the present-day and future emissions under SSP3-7.0 and SSP3-7.0-lowNTCF can be found in Liu et al. (2022). Other emissions used here are the same as described in Turnock et al. (2020).
2.2 Deep artificial neural network
We here develop a deep learning model using a multilayer perceptron, as it is a fundamental approach to build artificial neural networks and easy to apply. More complex approaches such as convolutional or attention-based neural networks could be applied (LeCun et al., 2015; Vaswani et al., 2017), but multilayer perceptron neural networks are competitive and show good performance compared with other approaches (Tolstikhin et al., 2021). We hence choose a classical artificial neural network as an initial step to explore the possibility of O3 bias correction; more complex approaches could be explored in future.
The multilayer perceptron neural network consists of an input layer, several hidden layers and an output layer, as shown in Fig. 1. In the hidden layers, we use three independent modules – a densely connected layer, a batch-normalisation layer (Ioffe and Szegedy, 2015) and a rectified linear unit (Relu; Glorot et al., 2011). Each layer has neurons that store data and associated weights. Neurons in densely connected layers connect to each neuron in the following layer. The batch-normalisation layers make the model training faster and more stable. The rectified linear unit is a non-linear activation function applied to the output of the previous layer. The deep learning model developed here is applied to correct surface O3 mixing ratios solely simulated by UKESM1.
2.3 Deep learning model input
Earth system models have numerous variables influencing surface O3 mixing ratios, but including all variables as inputs for the deep learning model is impractical due to the heavy computational burden. It may also lead to overfitting, a common issue in machine learning associated with including more variables than can be justified by the limited volume of training data. Limiting the number of variables used as inputs also makes the results easier to interpret. In this exploratory study, we investigated more than 30 key input variables that represent the major large-scale influences on O3 chemistry and transport, and settled on 20 variables that show the strongest relationships.
We consider major geographical and temporal variables including latitude, longitude, elevation, land cover and month. We define latitude from the Equator to the pole, and month from midwinter to midsummer in each hemisphere. Meteorological variables such as temperature, pressure, humidity, zonal and meridional wind are considered as they strongly influence O3 chemical formation and transport. The sensitivity of O3 to temperature is of particular interest, and has been shown to be a substantial source of uncertainty in current studies (Archibald et al., 2020c). Temperature and humidity have also been shown to influence O3 variability on both regional and synoptic scales (Han et al., 2020; Shi et al., 2020). Two fundamental photolysis rates governing O3 production and destruction, j(NO2) and jO(1D), are considered. Photolysis rates are strongly dependent on clouds, but there are large uncertainties in simulated cloud cover in current models (Wu et al., 2007; Voulgarakis et al., 2009; Hall et al., 2018). O3 deposition rates and boundary layer height (BLH) are considered as they influence O3 concentrations near the surface (O'Connor et al., 2014; Clifton et al., 2020). Concentrations of O3 precursors such as nitric oxide (NO), VOCs (primary VOC species) and biogenic isoprene are considered, as these govern O3 chemical production. The concentrations of hydroxyl radical (OH) and oxidative nitrogen species such as nitric acid (HNO3) and peroxyacyl nitrates (PAN) are also considered because they reflect the general oxidation capacity of the atmosphere. HNO3 and PAN are important nitrogen sinks that may transport nitrogen and affect O3 formation over a wide area. Between them, the 20 variables selected represent some of the key drivers of uncertainty in simulating surface O3, although we note that they are not independent of each other and that other factors may also be important under some conditions. We use O3 mixing ratios from the lowest model layer of UKESM1, and normalise values of each input variable from zero to one.
2.4 Deep learning model application
Previous studies have shown that there are systematic seasonal biases in surface O3 mixing ratios simulated with many chemistry–climate models (Young et al., 2018), including UKESM1 (Turnock et al., 2020). Ozone observations, such as those compiled for the Tropospheric Ozone Assessment Report (TOAR; Schultz et al., 2017), are typically used to evaluate model performance, but observation sites are sparsely distributed and there are few outside North America, Europe and parts of East Asia. In addition, many observations are representative of much smaller spatial scales than can be resolved by coarse-resolution models, and this presents an additional source of uncertainty.
We therefore also consider surface O3 reanalysis data from the European Centre for Medium-Range Weather Forecasts (ECMWF) Atmospheric Composition Reanalysis 4 (EAC4) under the Copernicus Atmosphere Monitoring Service (CAMS; Inness et al., 2019). These data are at a similar spatial scale to UKESM1 output and provide global data coverage, which is valuable in training the deep learning model to ensure more robust results. We compare surface O3 in UKESM1 with TOAR observations and CAMS reanalysis in Fig. 2. There are substantial biases in UKESM1, with surface O3 underestimated compared to observations in wintertime and overestimated in summertime. In contrast, the CAMS reanalysis is in much better agreement with TOAR, with mean seasonal biases of about 3 ppb. Comparing UKESM1 and CAMS data over the globe, we find that mean surface O3 mixing ratios over the 2004–2014 period simulated by UKESM1 are underestimated in the Northern Hemisphere in winter (December, January, February) and overestimated across most continental areas in summer (June, July, August), and this occurs over broad regions, not just where observations are available.
In the absence of a global observation-based ozone climatology, we apply the CAMS reanalysis product in our analysis. We note that recent studies have explored the fusion of observations and model output to generate surface O3 products at a global scale (Chang et al., 2019; Betancourt et al., 2022), but these approaches only work well in regions where measurement sites are available. The CAMS reanalysis provides surface concentrations at a scale comparable with our model, and thus avoids uncertainties associated with the spatial representativeness of observations when using measured concentrations. While biases in the reanalysis will inﬂuence our results, the CAMS data provide a good foundation with which to demonstrate the feasibility of O3 bias correction.
2.5 Model training
The deep learning model is trained to reproduce the O3 bias in each UKESM1 grid cell based on the corresponding values of the input variables. We train the deep learning model using the biases of monthly mean surface O3 mixing ratios from each model grid cell over 2004–2014 (192 longitudes × 144 latitudes × 12 months × 11 years = 3.6 million data samples). We randomly split the data into training data (80 %), validation data (10 %) and testing data (10 %). Training data are only used to train the model. The validation data provide an evaluation of model performance for each iteration of training and the testing data are used to provide an independent evaluation once model training is complete.
The performance of the deep learning model is dependent on the volume of data and the settings used, and we experiment with a range of different settings to keep a balance between training speed and accuracy. We choose an Adam optimiser for the training algorithm (Kingma and Ba, 2014) and use mean absolute error for the loss function in this study. We use 0.01 as the model learning rate and 1024 grid boxes as the training batch size for stochastic gradient descent. Among these settings, we find that the batch size is the most important factor influencing model performance. 1024 randomly sampled data points account for about 4 % of the data from all grid cells in 1 month in each training iteration, and we find that this is adequate to represent different situations of O3 biases and is found to be sufficient to train the model well.
We determine the deep learning model performance in predicting surface O3 biases using the testing data to give an independent evaluation (Fig. 3). The model reproduces the surface O3 biases well, with a high correlation coefficient of 0.99 and a mean bias error of 0.1 ppb and root-mean-square error of 1.9 ppb. The frequency distribution of surface O3 biases predicted by the deep learning model is very similar to that calculated using the O3 reanalysis data. The tails of the distribution also match well, indicating that large biases can be reproduced well. The evaluation demonstrates that the input variables selected are sufficient to predict surface O3 biases well.
To investigate the spatial and temporal behaviour of the model performance, we focus on surface O3 biases in the present-day high-emission regions of North America, Europe, East Asia and South Asia (Fig. 4). North America, Europe and East Asia all show systematic negative surface O3 biases in winter and positive biases in summer (Fig. 4a–c). South Asia shows different behaviour, with consistent positive biases for all months (Fig. 4d). O3 biases in South Asia show more fluctuations over the annual cycle than those in other regions, but these fluctuations are also captured well by the deep learning model. We note that the magnitudes of O3 biases are simulated well, and that the differences from year to year are also captured accurately. These four regions demonstrate that the deep learning model is able to predict regional differences and their respective magnitudes well.
While all input variables contribute to the prediction of O3 biases, their relative contributions are different and can be estimated to determine which ones are dominant. An advanced unified framework for interpreting predictions of machine learning models, Shapley additive explanations (SHAP; Lundberg and Lee, 2017), is used to calculate the contribution of different variables to the predicted biases. The feature importance is represented by the SHAP value, which provides a quantitative measure of the variable contribution, as shown in Fig. 5. We calculate SHAP values for each variable using 100 sets of 100 data points randomly selected from the full distribution, and show their mean values and one standard deviation. The colours indicate the underlying relationships between the O3 biases and the selected variables based on the correlation between the calculated SHAP values and variable values. Red represents a strong positive relationship (r>0.7), blue represents a strong negative relationship (.7) and grey shows weaker relationships.
We find that latitude and month are important to O3 biases and show negative and positive relationships with surface O3 biases, respectively. This reflects more positive biases in tropical regions than at the poles, and more positive biases in summer than winter. Temperature also shows a strong positive relationship, and this may partly reinforce the influence of latitude and month. Photolysis rates are also important for O3 biases, with jO(1D) associated with O3 destruction and j(NO2) with O3 production. The concentrations of PAN, OH and HNO3 all show positive relationships with O3 biases. This may indicate that there are large uncertainties in O3 production in high-oxidation and high-NOx environments. However, we find that VOCs and short-lived NO concentrations are less important to O3 biases. This highlights the systematic regional and global-scale nature of the O3 biases in UKESM1, and indicates that the biases are not strongly associated with precursor abundance on a regional level. Similarly, isoprene concentrations show little contribution to O3 biases. We note that while O3 deposition rates and BLH are both important to O3 biases, this may partly reflect their similar seasonality. Previous studies investigating model O3 biases have found a broadly similar importance for some variables, e.g. for time of year and precursors such as PAN, but the different focus of these studies makes direct comparison of the results difficult (Ivatt and Evans, 2020; Keller et al., 2021).
To highlight the sensitivity of our results to the physical and chemical environment, we show the feature importance over land and ocean regions separately in Fig. 5b. Ozone precursors such as NO, isoprene and VOCs are much more important over land, along with some physical variables such as temperature. In contrast, O3 biases over the ocean are more sensitive to OH, deposition and boundary layer mixing. These differences reflect the differing importance of O3 formation and removal processes in the different regions, although we find that the dominant variables such as temperature and photolysis rates remain important for both regions.
We also calculate feature importance at the TOAR measurement locations only and compare use of surface O3 from TOAR and CAMS separately, to explore the sensitivity of our results to the choice of reference data. We find that the feature importance at these locations differs markedly from that over the globe for some variables, particularly for OH and for geographical variables such as latitude and longitude. These differences reflect the limited spatial coverage of measurement sites and the narrower range of chemical environments sampled. However, the feature importance is very similar whether using TOAR measurements or CAMS reanalysis O3 at these same locations, demonstrating that these datasets provide very similar information, and this lends confidence in our choice of CAMS reanalysis data for our analysis.
The relationships between variables with the highest feature importance and the O3 biases are generally directly interpretable, demonstrating that the deep learning model may be capturing the internal relationships between inputs and outputs in a physically realistic way. This provides some insight into the sources of O3 biases in UKESM1. We emphasise that the high importance of a variable does not indicate that the variable itself is not simulated well by the chemistry–climate model, or that it is the direct cause of the bias. Since temperature is generally represented well in UKESM1 (Sellar et al., 2019), the importance of temperature thus indicates that O3 biases may be caused by the representation of physical and chemical processes that are sensitive to temperature change, such as chemical reaction rates (Coates et al., 2016; Newsome and Evans, 2017), or to other processes for which temperature is a proxy, and this explains the seasonality of the reversal in O3 biases from winter to summer in the Northern Hemisphere.
Specifically for UKESM1, Archibald et al. (2020c) found that the O3 responses to the same temperature changes in two chemical mechanisms (including StratTrop of UKESM1) are distinct, suggesting that temperature may be a main source of biases. In addition, more comprehensive chemistry schemes based on StratTrop further enlarge the O3 biases in summer, as reported by Archer-Nicholls et al. (2021) and Liu et al. (2022), indicating that the chemistry scheme itself may not be the main cause of biases but the external variables driving the scheme, e.g. temperature and photolysis rates may be more important. We note that the relationships derived between the variables and O3 biases reflect association, not causation, and that specific processes cannot be identified directly as the sources of biases. However, the association revealed provides some hints for the underlying processes associated with relevant variables.
The sensitivity of surface O3 biases to specific variables differs across regions, and we show the spatial sensitivity to variables with high feature importance and strong correlation to O3 biases in Fig. 6. Since each variable is considered independent in the deep learning model, we use the change in annual mean O3 bias caused by changes in each variable in each UKESM1 grid cell independently to represent the spatial sensitivity. We perform an experiment for each variable where we increase the value of that variable by a small amount (0.5 standard deviations of its temporal variability over 2004–2014) and calculate the corresponding change in surface O3.
Surface O3 biases are most sensitive to temperature, particularly in continental areas in the Northern Hemisphere where higher temperatures are associated with higher O3 (Fig. 6a). There is a strong relationship with photolysis rates across a large area, particularly in continental areas at mid and high latitudes (Fig. 6b, c), and there is a larger influence from jO(1D) than from j(NO2). The chemical environment is important for O3 biases on a regional scale. OH concentrations show a strong association with O3 biases in North America, Europe and East Asia, indicating that high biases in these high-emission regions may be associated with high atmospheric oxidation capacity (Fig. 6d). There is also a strong sensitivity to the concentrations of PAN in South Africa, South Asia and South East Asia (Fig. 6e). This may indicate uncertainty in the NOx emission inventory in these regions or the large impacts of nitrogen reservoirs on O3 production. Given the long lifetime of PAN, it is also associated with O3 biases in remote areas such as the Arctic, indicating that the transport of air pollutants may be important to surface O3 in these areas. BLH is associated with O3 biases in tropical oceanic areas (Fig. 6f), and this may reveal the importance of greater O3 mixing and downward transport when the boundary layer is relatively deep.
The spatial sensitivity of surface O3 biases to different variables is helpful for guiding future improvement of the UKESM1 model. There are substantial changes in annual mean surface O3 biases associated with adjusting variables' values. Increasing temperature, jO(1D), j(NO2), OH and PAN concentrations by 0.5 standard deviations changes annual mean surface O3 biases from 4.0 to 4.8 ppb (20 %), 3.0 ppb (−25 %), 4.3 ppb (8 %), 4.5 ppb (13 %) and 4.7 ppb (18 %), respectively. However, we note that UKESM1 generally reproduces temperature and photolysis rates well compared with observations (Telford et al., 2013; Sellar et al., 2019), although there are large differences in simulated concentrations of OH and PAN (O'Connor et al., 2014; Nicely et al., 2020). Our results suggest that chemical processes associated with temperature and oxidation capacity, and cloud and aerosols influencing photolysis rates, may be important sources of O3 biases in UKESM1, and that improved representation of these processes may reduce current biases in surface O3.
We can apply the relationships between variables and surface O3 biases derived from present-day simulations to assess the biases in future O3 projections with UKESM1 and to correct our estimates of future O3 concentrations. We demonstrate how surface O3 biases change for two future emission and climate scenarios, SSP3-7.0 and SSP3-7.0-lowNTCF. These pathways are associated with a warmer and more humid climate than in the present day. While increased temperature might be expected to increase surface O3 biases, we find that annual mean O3 biases decrease from 4.0 to 3.6 ppb (11 %) under SSP3-7.0 and to 1.3 ppb (67 %) under SSP3-7.0-lowNTCF. This is principally due to changes in the chemical environment reflected by decreases in the concentrations of OH (−15 % and −13 %) and PAN (−30 % and −38 %) under SSP3-7.0 and SSP3-7.0-lowNTCF, respectively. In continental areas where surface O3 concentrations are overestimated, the UKESM1 model performance is likely to improve under these less polluted future conditions. Since SSP3-7.0-lowNTCF represents a more stringent emission-control pathway than SSP3-7.0, there are larger decreases in O3 biases under this scenario.
We investigate the spatial distribution of annual mean changes in surface O3 biases in future scenarios. We find that O3 biases decrease in most oceanic areas under both future scenarios, see Fig. 7. However, O3 biases increase in some continental areas, especially in the Middle East, South Asia and East Asia, under SSP3-7.0. This is due to less stringent emission controls in these regions and hence higher concentrations of O3 precursors and their oxidation products under SSP3-7.0 (Turnock et al., 2020). Under SSP3-7.0-lowNTCF, there are widespread decreases in O3 biases except over East Asia, where anthropogenic VOC emissions increase substantially and there is a corresponding increase in PAN concentrations and an increase in O3 biases. In high-emission regions, the performance of UKESM1 in future O3 simulations largely depends on changes in O3 precursor emissions, given that changes in temperature and photolysis rates are small under future scenarios. The performance of UKESM1 in high-emission regions is expected to improve under scenarios with clean air quality policies, but is likely to become worse under scenarios with increasing future pollutant emissions.
We can provide more reliable projections of future O3 by subtracting the calculated surface O3 biases from surface O3 mixing ratios simulated with UKESM1 under future scenarios (Fig. 8). The simulated surface O3 mixing ratios vary in the different scenarios due to different emissions and climate (Fig. 8a–c), but the spatial distributions are generally similar, with the highest O3 levels in the Middle East and South Asia. The spatial patterns of surface O3 biases are also similar under the different scenarios, with biases highest in the tropics (Fig. 8d–f). High O3 mixing ratios in the Middle East and South Asia are reduced greatly after O3 bias correction (Fig. 8g–h). There are also large decreases in surface O3 mixing ratios in high-emission regions, e.g. North America and East Asia, and continental outflow regions, e.g. the North Atlantic. The corrected global annual mean surface O3 mixing ratios are lower than those simulated under all scenarios, and are highest under SSP3-7.0 and lowest under SSP3-7.0-lowNTCF, which is consistent with the uncorrected UKESM1 results.
We show the changes in seasonal mean surface O3 mixing ratios in North America, Europe, South Asia, East Asia and the globe from the present day to the future in Fig. 9, comparing the original assessments using UKESM1 with the bias-corrected values. Under SSP3-7.0, the corrected changes in global mean surface O3 are slightly larger than the uncorrected UKESM1 results. However, in high-emission regions, the corrected changes are generally smaller than those originally simulated under both SSP3-7.0 and SSP3-7.0-lowNTCF. In summer, corrected surface O3 mixing ratios increase in all regions considered here under SSP3-7.0, and decrease under SSP3-7.0-lowNTCF. Corrected O3 increases in South and East Asia under SSP3-7.0 are 6–8 ppb smaller than those simulated, and this indicates that O3 air quality degradation due to future emission growth and climate change may not be as severe as the uncorrected UKESM1 simulations suggest. Similarly, under SSP3-7.0-lowNTCF, corrected O3 decreases are smaller in all regions, and this indicates that the impacts of emission controls on O3 mitigation may be smaller than those expected. This can be confirmed by the smaller global mean O3 decreases under SSP3-7.0-lowNTCF in the bias-corrected assessment (< 2 ppb) than in the original UKESM1 simulation (> 3 ppb). In winter, the corrected changes in surface O3 mixing ratios are smaller than those simulated with UKESM1, regardless of whether these changes are positive or negative.
These results highlight that the influence of changing emissions and climate on O3 may not be as large as those simulated with UKESM1 and, thus, projections of future surface O3 changes may be overestimated. UKESM1 shows a strong seasonality of surface O3, likely due to strong O3 sensitivity to temperature and the chemical environment, and this leads to large changes in future O3. UKESM1 typically overestimates future surface O3 changes, and other chemistry–climate models are likely to display similar behaviour. Therefore, the impacts of changes in emissions and climate on future O3 should be re-assessed in light of the underlying surface O3 biases. We demonstrate the successful application of a deep learning model to address this issue, and it would be valuable to take a similar approach with the output of other chemistry–climate models to provide a more reliable assessment of future surface O3 changes.
There are large uncertainties in the simulation of surface O3 in current chemistry–climate models, but it is difficult to identify the causes of biases and improve representation of the key processes. In this study, we have demonstrated the feasibility of correcting surface O3 biases for a chemistry–climate model, UKESM1, using a machine learning technique. A deep artificial neural network is built with input variables important for O3 chemistry and dynamics. The deep learning model shows good performance in predicting surface O3 biases, with a high correlation coefficient of 0.99 and small mean bias errors of 0.1 ppb. Application of the deep learning model to the results from the process-based UKESM1 model shows promise for predicting future O3 concentrations under different climate and emission trajectories with greater confidence.
This study has also explored the key factors governing O3 biases, which provides valuable insight for model improvement. We find that temperature is an important factor governing O3 biases, especially for continental areas in the Northern Hemisphere, indicating that physical and chemical processes influenced by temperature may be not represented well. Photolysis rates also contribute to O3 biases across the globe, indicating that simulated clouds and aerosols may be an important source of O3 biases. Chemical species such as PAN and OH are closely associated with O3 biases on a regional scale, suggesting that weaknesses in representation of key chemical processes remains a substantial issue.
We have applied a deep learning model to generate a correction to the projections of surface O3 mixing ratios for the present day and under future SSP3-7.0 and SSP3-7.0-lowNTCF pathways. We find that global annual mean O3 biases (4.0 ppb) decrease by 0.4 ppb (11 %) and 2.7 ppb (67 %) under these future scenarios, respectively. However, O3 biases in high-emission areas may increase due to increased O3 precursors. We use this approach to demonstrate that seasonal changes in surface O3 mixing ratios from the present day to the future may be overestimated by as much as 6 ppb with UKESM1, especially in high-emission areas, and this highlights a strong O3 sensitivity to changes in future emissions and climate in the model. A similar overestimation of future O3 changes is likely in other chemistry–climate models, and the influence of emission controls on surface O3 mixing ratios may thus be smaller than suggested by current model simulations. This suggests that emission-control policies may be less effective in improving regional air quality than global model simulations indicate.
The deep learning model employed here is a valuable tool for obtaining more reliable predictions of the magnitude and spatial distribution of surface O3 mixing ratios. We acknowledge that the choice of input variables and the machine learning approach applied are both likely to influence the sensitivity of O3 biases derived from the deep learning model, and the relationships between O3 biases and input variables are not always readily interpretable, which is common in machine learning. However, we demonstrate that the relationships between the variables with the highest feature importance and surface O3 biases are intuitive, e.g. with temperature and photolysis rates, and this provides useful insight for further model improvement. While we are not able to identify the specific processes leading to biases using this approach, it allows us to target processes that are most sensitive to these variables. It would be valuable to develop explainable machine learning algorithms to use for bias correction. We also note that there are weaknesses in the representation of O3 in the reanalysis data, which are likely to affect the magnitude of the biases we have derived. However, we have successfully demonstrated the feasibility of bias correction using these data, and will explore the challenges of data sparsity and spatial representativeness associated with use of surface measurements directly in future work. This approach should also be directly applicable for models with smaller initial biases, and in this case it would be particularly valuable to consider daily or hourly mean O3 to explore representation of synoptic and diurnal variations in O3. However, development of robust and reliable surface O3 climatology based on observations would be particularly useful to improve the assessment of model biases. The approach applied here provides a valuable opportunity to examine the uncertainties in a chemistry–climate model, and helps improve assessment of the impacts of changing emissions and climate on future air quality.
The data generated in this study are available upon request.
ZL, RD and OW designed the study. ZL built the model, conducted model simulations and performed the analysis with input from OW, RD, FO'C and ST. ZL, RD and OW prepared the paper, with contributions from all co-authors.
The contact author has declared that none of the authors has any competing interests.
Publisher's note: Copernicus Publications remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Zhenze Liu thanks the University of Edinburgh China Scholarship Council. Oliver Wild and Ruth M. Doherty thank the Natural Environment Research Council (NERC) for funding under grants NE/N006925/1, NE/N006976/1 and NE/N006941/1. Fiona M. O'Connor was supported by the Met Office Hadley Centre Climate Programme funded by BEIS and also acknowledges support from the EU Horizon 2020 Research Programme CRESCENDO (grant agreement number 641816). Steven Turnock would like to acknowledge support from the UK–China Research and Innovation Partnership Fund through the Met Office Climate Science for Service Partnership (CSSP) China as part of the Newton Fund.
This research has been supported by the China Scholarship Council (grant no. 201708060462) and the Natural Environment Research Council (grant nos. NE/N006925/1, NE/N006976/1, and NE/N006941/1).
This paper was edited by Frank Dentener and reviewed by two anonymous referees.
Archer-Nicholls, S., Abraham, N. L., Shin, Y., Weber, J., Russo,M. R., Lowe, D., Utembe, S., O’Connor, F., Kerridge, B., Latter, B, Siddans, R., Jenkin, M., Wild, O., and Archibald, A. T.: The Common Representative Intermediates Mechanism version 2 in the United Kingdom Chemistry and Aerosols Model, J. Adv. Model. Earth Sy., 13, e2020MS002420, https://doi.org/10.1029/2020MS002420, 2021. a
Archibald, A., Neu, J., Elshorbany, Y., Cooper, O., Young,P., Akiyoshi, H., Cox, R., Coyle, M., Derwent, R., Deushi,M., Finco, A., Frost, G. J., Galbally, I. E., Gerosa, G., Granier, C., Griffiths, P. T., Hossaini, R., Hu, L., Jöckel, P., Josse, B., Lin, M. Y., Mertens, M., Morgenstern, O., Naja, M., Naik, V., Oltmans, S., Plummer, D. A., Revell, L. E., Saiz-Lopez, A., Saxena, P., Shin, Y. M., Shahid, I., Shallcross, D., Tilmes, S., Trickl, T., Wallington, T. J., Wang, T., Worden, H. M., and Zeng, G.: Tropospheric Ozone Assessment Report: A critical review of changes in the tropospheric ozone burden and budget from 1850 to 2100, Elementa, 8, 034, https://doi.org/10.1525/elementa.2020.034, 2020a. a, b
Archibald, A. T., O'Connor, F. M., Abraham, N. L., Archer-Nicholls, S., Chipperfield, M. P., Dalvi, M., Folberth, G. A., Dennison, F., Dhomse, S. S., Griffiths, P. T., Hardacre, C., Hewitt, A. J., Hill, R. S., Johnson, C. E., Keeble, J., Köhler, M. O., Morgenstern, O., Mulcahy, J. P., Ordóñez, C., Pope, R. J., Rumbold, S. T., Russo, M. R., Savage, N. H., Sellar, A., Stringer, M., Turnock, S. T., Wild, O., and Zeng, G.: Description and evaluation of the UKCA stratosphere–troposphere chemistry scheme (StratTrop vn 1.0) implemented in UKESM1, Geosci. Model Dev., 13, 1223–1266, https://doi.org/10.5194/gmd-13-1223-2020, 2020b. a
Archibald, A. T., Turnock, S. T., Griffiths, P. T., Cox, T., Derwent, R. G., Knote, C., and Shin, M.: On the changes in surface ozone over the twenty-first century: sensitivity to changes in surface temperature and chemical mechanisms, Philos. T. Roy. Soc. A, 378, 20190329, https://doi.org/10.1098/rsta.2019.0329, 2020c. a, b
Betancourt, C., Stomberg, T. T., Edrich, A.-K., Patnala, A., Schultz, M. G., Roscher, R., Kowalski, J., and Stadtler, S.: Global, high-resolution mapping of tropospheric ozone – explainable machine learning and impact of uncertainties, Geosci. Model Dev., 15, 4331–4354, https://doi.org/10.5194/gmd-15-4331-2022, 2022. a
Chang, K.-L., Cooper, O. R., West, J. J., Serre, M. L., Schultz, M. G., Lin, M., Marécal, V., Josse, B., Deushi, M., Sudo, K., Liu, J., and Keller, C. A.: A new method (M3Fusion v1) for combining observations and multiple model output for an improved estimate of the global surface ozone distribution, Geosci. Model Dev., 12, 955–978, https://doi.org/10.5194/gmd-12-955-2019, 2019. a
Clifton, O. E., Fiore, A. M., Massman, W. J., Baublitz, C. B., Coyle,M., Emberson, L., Fares, S., Farmer, D. K., Gentine, P., Gerosa,G., Guenther, A. B., Helmig, D., Lombardozzi, D. L., Munger, J. W, Patton, E. G., Pusede, S. E., Schwede, D. B., Silva, S. J., Sörgel, M, Steiner, A. L., and Tai, A. P. K.: Dry deposition of ozone over land: processes, measurement, and modeling, Rev. Geophys., 58, e2019RG000670, https://doi.org/10.1029/2019RG000670, 2020. a
Coates, J., Mar, K. A., Ojha, N., and Butler, T. M.: The influence of temperature on ozone production under varying NOx conditions – a modelling study, Atmos. Chem. Phys., 16, 11601–11615, https://doi.org/10.5194/acp-16-11601-2016, 2016. a
Eyring, V., Bony, S., Meehl, G. A., Senior, C. A., Stevens, B., Stouffer, R. J., and Taylor, K. E.: Overview of the Coupled Model Intercomparison Project Phase 6 (CMIP6) experimental design and organization, Geosci. Model Dev., 9, 1937–1958, https://doi.org/10.5194/gmd-9-1937-2016, 2016. a
Flato, G. M.: Earth system models: an overview, Wires Clim. Change, 2, 783–800, https://doi.org/10.1002/wcc.148, 2011. a
Glorot, X., Bordes, A., and Bengio, Y.: Deep sparse rectifier neural networks, in: Proceedings of the fourteenth international conference on artificial intelligence and statistics, JMLR Workshop and Conference Proceedings, 315–323, http://proceedings.mlr.press/v15/glorot11a/glorot11a.pdf (last access: 1 February 2022), 2011. a
Goodfellow, I., Bengio, Y., and Courville, A.: Deep learning, MIT press, http://www.deeplearningbook.org (last access: 1 February 2022), 2016. a
Griffiths, P. T., Murray, L. T., Zeng, G., Shin, Y. M., Abraham, N. L., Archibald, A. T., Deushi, M., Emmons, L. K., Galbally, I. E., Hassler, B., Horowitz, L. W., Keeble, J., Liu, J., Moeini, O., Naik, V., O'Connor, F. M., Oshima, N., Tarasick, D., Tilmes, S., Turnock, S. T., Wild, O., Young, P. J., and Zanis, P.: Tropospheric ozone in CMIP6 simulations, Atmos. Chem. Phys., 21, 4187–4218, https://doi.org/10.5194/acp-21-4187-2021, 2021. a
Hall, S. R., Ullmann, K., Prather, M. J., Flynn, C. M., Murray, L. T., Fiore, A. M., Correa, G., Strode, S. A., Steenrod, S. D., Lamarque, J.-F., Guth, J., Josse, B., Flemming, J., Huijnen, V., Abraham, N. L., and Archibald, A. T.: Cloud impacts on photochemistry: building a climatology of photolysis rates from the Atmospheric Tomography mission, Atmos. Chem. Phys., 18, 16809–16828, https://doi.org/10.5194/acp-18-16809-2018, 2018. a
Han, H., Liu, J., Shu, L., Wang, T., and Yuan, H.: Local and synoptic meteorological influences on daily variability in summertime surface ozone in eastern China, Atmos. Chem. Phys., 20, 203–222, https://doi.org/10.5194/acp-20-203-2020, 2020. a
Han, J., Jentzen, A., and Weinan, E.: Solving high-dimensional partial differential equations using deep learning, P. Natl. Acad. Sci. USA, 115, 8505–8510, https://doi.org/10.1073/pnas.1718942115, 2018. a
Hoesly, R. M., Smith, S. J., Feng, L., Klimont, Z., Janssens-Maenhout, G., Pitkanen, T., Seibert, J. J., Vu, L., Andres, R. J., Bolt, R. M., Bond, T. C., Dawidowski, L., Kholod, N., Kurokawa, J.-I., Li, M., Liu, L., Lu, Z., Moura, M. C. P., O'Rourke, P. R., and Zhang, Q.: Historical (1750–2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS), Geosci. Model Dev., 11, 369–408, https://doi.org/10.5194/gmd-11-369-2018, 2018. a
Inness, A., Ades, M., Agustí-Panareda, A., Barré, J., Benedictow, A., Blechschmidt, A.-M., Dominguez, J. J., Engelen, R., Eskes, H., Flemming, J., Huijnen, V., Jones, L., Kipling, Z., Massart, S., Parrington, M., Peuch, V.-H., Razinger, M., Remy, S., Schulz, M., and Suttie, M.: The CAMS reanalysis of atmospheric composition, Atmos. Chem. Phys., 19, 3515–3556, https://doi.org/10.5194/acp-19-3515-2019, 2019. a
Ioffe, S. and Szegedy, C.: Batch normalization: Accelerating deep network training by reducing internal covariate shift, in: International conference on machine learning, PMLR, arXiv, 448–456, https://doi.org/10.48550/arXiv.1502.0316, 2015. a
Ivatt, P. D. and Evans, M. J.: Improving the prediction of an atmospheric chemistry transport model using gradient-boosted regression trees, Atmos. Chem. Phys., 20, 8063–8082, https://doi.org/10.5194/acp-20-8063-2020, 2020. a
Keller, C. A. and Evans, M. J.: Application of random forest regression to the calculation of gas-phase chemistry within the GEOS-Chem chemistry model v10, Geosci. Model Dev., 12, 1209–1225, https://doi.org/10.5194/gmd-12-1209-2019, 2019. a
Keller, C. A., Evans, M. J., Knowland, K. E., Hasenkopf, C. A., Modekurty, S., Lucchesi, R. A., Oda, T., Franca, B. B., Mandarino, F. C., Díaz Suárez, M. V., Ryan, R. G., Fakes, L. H., and Pawson, S.: Global impact of COVID-19 restrictions on the surface concentrations of nitrogen dioxide and ozone, Atmos. Chem. Phys., 21, 3555–3592, https://doi.org/10.5194/acp-21-3555-2021, 2021. a
Kingma, D. P. and Ba, J.: Adam: A method for stochastic optimization, arXiv [preprint], https://doi.org/10.48550/arXiv.1412.6980, 2014. a
Kleinert, F., Leufen, L. H., and Schultz, M. G.: IntelliO3-ts v1.0: a neural network approach to predict near-surface ozone concentrations in Germany, Geosci. Model Dev., 14, 1–25, https://doi.org/10.5194/gmd-14-1-2021, 2021. a
Knutti, R. and Sedláček, J.: Robustness and uncertainties in the new CMIP5 climate model projections, Nat. Clim. Change, 3, 369–373, https://doi.org/10.1038/nclimate1716, 2013. a
LeCun, Y., Bengio, Y., and Hinton, G.: Deep learning, Nature, 521, 436–444, https://doi.org/10.1038/nature14539, 2015. a
Liu, Z., Doherty, R. M., Wild, O., Hollaway, M., and O’Connor, F. M.: Contrasting chemical environments in summertime for atmospheric ozone across major Chinese industrial regions: the effectiveness of emission control strategies, Atmos. Chem. Phys., 21, 10689–10706, https://doi.org/10.5194/acp-21-10689-2021, 2021. a
Liu, Z., Doherty, R. M., Wild, O., O'Connor, F. M., and Turnock, S. T.: Tropospheric ozone changes and ozone sensitivity from the present day to the future under shared socio-economic pathways, Atmos. Chem. Phys., 22, 1209–1227, https://doi.org/10.5194/acp-22-1209-2022, 2022. a, b
Lundberg, S. M. and Lee, S.-I.: A unified approach to interpreting model predictions, in: Proceedings of the 31st international conference on neural information processing systems, arXiv, 4768–4777, https://doi.org/10.48550/arXiv.1705.07874 2017. a
Meinshausen, M., Vogel, E., Nauels, A., Lorbacher, K., Meinshausen, N., Etheridge, D. M., Fraser, P. J., Montzka, S. A., Rayner, P. J., Trudinger, C. M., Krummel, P. B., Beyerle, U., Canadell, J. G., Daniel, J. S., Enting, I. G., Law, R. M., Lunder, C. R., O'Doherty, S., Prinn, R. G., Reimann, S., Rubino, M., Velders, G. J. M., Vollmer, M. K., Wang, R. H. J., and Weiss, R.: Historical greenhouse gas concentrations for climate modelling (CMIP6), Geosci. Model Dev., 10, 2057–2116, https://doi.org/10.5194/gmd-10-2057-2017, 2017. a
Meinshausen, M., Nicholls, Z. R. J., Lewis, J., Gidden, M. J., Vogel, E., Freund, M., Beyerle, U., Gessner, C., Nauels, A., Bauer, N., Canadell, J. G., Daniel, J. S., John, A., Krummel, P. B., Luderer, G., Meinshausen, N., Montzka, S. A., Rayner, P. J., Reimann, S., Smith, S. J., van den Berg, M., Velders, G. J. M., Vollmer, M. K., and Wang, R. H. J.: The shared socio-economic pathway (SSP) greenhouse gas concentrations and their extensions to 2500, Geosci. Model Dev., 13, 3571–3605, https://doi.org/10.5194/gmd-13-3571-2020, 2020. a
Mulcahy, J. P., Johnson, C., Jones, C. G., Povey, A. C., Scott, C. E., Sellar, A., Turnock, S. T., Woodhouse, M. T., Abraham, N. L., Andrews, M. B., Bellouin, N., Browse, J., Carslaw, K. S., Dalvi, M., Folberth, G. A., Glover, M., Grosvenor, D. P., Hardacre, C., Hill, R., Johnson, B., Jones, A., Kipling, Z., Mann, G., Mollard, J., O'Connor, F. M., Palmiéri, J., Reddington, C., Rumbold, S. T., Richardson, M., Schutgens, N. A. J., Stier, P., Stringer, M., Tang, Y., Walton, J., Woodward, S., and Yool, A.: Description and evaluation of aerosol in UKESM1 and HadGEM3-GC3.1 CMIP6 historical simulations, Geosci. Model Dev., 13, 6383–6423, https://doi.org/10.5194/gmd-13-6383-2020, 2020. a
Newsome, B. and Evans, M.: Impact of uncertainties in inorganic chemical rate constants on tropospheric composition and ozone radiative forcing, Atmos. Chem. Phys., 17, 14333–14352, https://doi.org/10.5194/acp-17-14333-2017, 2017. a
Nicely, J. M., Duncan, B. N., Hanisco, T. F., Wolfe, G. M., Salawitch, R. J., Deushi, M., Haslerud, A. S., Jöckel, P., Josse, B., Kinnison, D. E., Klekociuk, A., Manyin, M. E., Marécal, V., Morgenstern, O., Murray, L. T., Myhre, G., Oman, L. D., Pitari, G., Pozzer, A., Quaglia, I., Revell, L. E., Rozanov, E., Stenke, A., Stone, K., Strahan, S., Tilmes, S., Tost, H., Westervelt, D. M., and Zeng, G.: A machine learning examination of hydroxyl radical differences among model simulations for CCMI-1, Atmos. Chem. Phys., 20, 1341–1361, https://doi.org/10.5194/acp-20-1341-2020, 2020. a
O'Connor, F. M., Johnson, C. E., Morgenstern, O., Abraham, N. L., Braesicke, P., Dalvi, M., Folberth, G. A., Sanderson, M. G., Telford, P. J., Voulgarakis, A., Young, P. J., Zeng, G., Collins, W. J., and Pyle, J. A.: Evaluation of the new UKCA climate-composition model – Part 2: The Troposphere, Geosci. Model Dev., 7, 41–91, https://doi.org/10.5194/gmd-7-41-2014, 2014. a, b, c
O’Neill, B. C., Kriegler, E., Riahi, K., Ebi, K. L., Hallegatte, S., Carter, T. R., Mathur, R., and van Vuuren, D. P.: A new scenario framework for climate change research: the concept of shared socioeconomic pathways, Climatic Change, 122, 387–400, https://doi.org/10.1007/s10584-013-0905-2, 2014. a
Pacifico, F., Harrison, S. P., Jones, C. D., Arneth, A., Sitch, S., Weedon, G. P., Barkley, M. P., Palmer, P. I., Serça, D., Potosnak, M., Fu, T.-M., Goldstein, A., Bai, J., and Schurgers, G.: Evaluation of a photosynthesis-based biogenic isoprene emission scheme in JULES and simulation of isoprene emissions under present-day climate conditions, Atmos. Chem. Phys., 11, 4371–4389, https://doi.org/10.5194/acp-11-4371-2011, 2011. a
Parrish, D. D., Derwent, R. G., Turnock, S. T., O'Connor, F. M., Staehelin, J., Bauer, S. E., Deushi, M., Oshima, N., Tsigaridis, K., Wu, T., and Zhang, J.: Investigations on the anthropogenic reversal of the natural ozone gradient between northern and southern midlatitudes, Atmos. Chem. Phys., 21, 9669–9679, https://doi.org/10.5194/acp-21-9669-2021, 2021. a
Rao, S., Klimont, Z., Smith, S. J., Van Dingenen, R., Dentener, F., Bouwman, L., Riahi, K., Amann, M., Bodirsky, B. L., van Vuuren, D. P., Reis L. A., Calvin K., Drouet L., Fricko O., Fujimori S., Gernaat D., Havlik P., Harmsen M., Hasegawa T., Heyes C., Hilaire J., Luderer G., Masui T., Stehfest E., Strefler J., van der Sluis S., and Tavoni M.: Future air pollution in the Shared Socio-economic Pathways, Global Environ. Chang., 42, 346–358, https://doi.org/10.1016/j.gloenvcha.2016.05.012, 2017. a
Rasp, S., Pritchard, M. S., and Gentine, P.: Deep learning to represent subgrid processes in climate models, P. Natl. Acad. Sci. USA, 115, 9684–9689, https://doi.org/10.1073/pnas.1810286115, 2018. a
Ravuri, S., Lenc, K., Willson, M., Kangin, D., Lam, R.,Mirowski, P., Fitzsimons, M., Athanassiadou, M., Kashem, S., Madge, S.,Prudden, R., Mandhane, A., Clark, A., Brock, A., Simonyan, K., Hadsell, R., Robinson, N., Clancy, E., Arribas, A., and Mohamed, S.: Skillful Precipitation Nowcasting using Deep Generative Models of Radar, Nature, 597, 672–677, https://doi.org/10.1038/s41586-021-03854-z, 2021. a
Schultz, M. G., Schroder, S., Lyapina, O., Cooper, O. R., Galbally, I., Petropavlovskikh, I., von Schneidemesser, E., Tanimoto, H., Elshorbany, Y., Naja, M., Seguel, R. J., Dauert, U., Eckhardt, P., Feigenspan, S., Fiebig, M., Hjellbrekke, A. G., Hong, Y. D., Kjeld, P. C., Koide, H., Lear, G., Tarasick, D., Ueno, M., Wallasch, M., Baumgardner, D., Chuang, M. T., Gillett, R., Lee, M., Molloy, S., Moolla, R., Wang, T., Sharps, K., Adame, J. A., Ancellet, G., Apadula, F., Artaxo, P., Barlasina, M. E., Bogucka, M., Bonasoni, P., Chang, L., Colomb, A., Cuevas-Agullo, E., Cupeiro, M., Degorska, A., Ding, A. J., FrHlich, M., Frolova, M., Gadhavi, H., Gheusi, F., Gilge, S., Gonzalez, M. Y., Gros, V., Hamad, S. H., Helmig, D., Henriques, D., Hermansen, O., Holla, R., Hueber, J., Im, U., Jaffe, D. A., Komala, N., Kubistin, D., Lam, K. S., Laurila, T., Lee, H., Levy, I., Mazzoleni, C., Mazzoleni, L. R., McClure-Begley, A., Mohamad, M., Murovec, M., Navarro-Comas, M., Nicodim, F., Parrish, D., Read, K. A., Reid, N., Ries, N. R. L., Saxena, P., Schwab, J. J., Scorgie, Y., Senik, I., Simmonds, P., Sinha, V., Skorokhod, A. I., Spain, G., Spangl, W., Spoor, R., Springston, S. R., Steer, K., Steinbacher, M., Suharguniyawan, E., Torre, P., Trickl, T., Lin, W. L., Weller, R., Xu, X. B., Xue, L. K., and Ma, Z. Q.: Tropospheric Ozone Assessment Report: Database and metrics data of global surface ozone observations, Elementa, 5, 58, https://doi.org/10.1525/elementa.244, 2017. a
Sellar, A. A., Jones, C. G., Mulcahy, J. P., Tang, Y. M., Yool, A., Wiltshire, A., O'Connor, F. M., Stringer, M., Hill, R., Palmieri, J., Woodward, S., de Mora, L., Kuhlbrodt, T., Rumbold, S. T., Kelley, D. I., Ellis, R., Johnson, C. E., Walton, J., Abraham, N. L., Andrews, M. B., Andrews, T., Archibald, A. T., Berthou, S., Burke, E., Blockley, E., Carslaw, K., Dalvi, M., Edwards, J., Folberth, G. A., Gedney, N., Griffiths, P. T., Harper, A. B., Hendry, M. A., Hewitt, A. J., Johnson, B., Jones, A., Jones, C. D., Keeble, J., Liddicoat, S., Morgenstern, O., Parker, R. J., Predoi, V., Robertson, E., Siahaan, A., Smith, R. S., Swaminathan, R., Woodhouse, M. T., Zeng, G., and Zerroukat, M.: UKESM1: Description and evaluation of the UK Earth System Model, J. Adv. Modeling Earth Sy., 11, 4513–4558, https://doi.org/10.1029/2019MS001739, 2019. a, b, c
Shi, Z., Huang, L., Li, J., Ying, Q., Zhang, H., and Hu, J.: Sensitivity analysis of the surface ozone and fine particulate matter to meteorological parameters in China, Atmos. Chem. Phys., 20, 13455–13466, https://doi.org/10.5194/acp-20-13455-2020, 2020. a
Sønderby, C. K., Espeholt, L., Heek, J., Dehghani, M., Oliver, A., Salimans, T., Agrawal, S., Hickey, J., and Kalchbrenner, N.: Metnet: A neural weather model for precipitation forecasting, arXiv [preprint], https://doi.org/10.48550/arXiv.2003.12140, 2020. a
Stock, Z. S., Russo, M. R., and Pyle, J. A.: Representing ozone extremes in European megacities: the importance of resolution in a global chemistry climate model, Atmos. Chem. Phys., 14, 3899–3912, https://doi.org/10.5194/acp-14-3899-2014, 2014. a
Tarasick, D., Galbally, I. E., Cooper, O. R., Schultz, M. G., Ancellet, G., Leblanc, T., Wallington, T. J., Ziemke, J., Liu, X., Steinbacher, M., Staehelin, J., Vigouroux, C., Hannigan, J. W., García, O., Foret, G., Zanis, P., Weatherhead, E., Petropavlovskikh, I., Worden, H., Osman, M., Liu, J., Chang, K., Gaudel, A., Lin, M., Granados-Muñoz, M., Thompson, A. M., Oltmans, S. J., Cuesta, J., Dufour, G., Thouret, V., Hassler, B., Trickl, T., and Neu, J. L.: Tropospheric Ozone Assessment Report: Tropospheric ozone from 1877 to 2016, observed levels, trends and uncertainties, Elementa, 7, 39, https://doi.org/10.1525/elementa.376, 2019. a
Telford, P. J., Abraham, N. L., Archibald, A. T., Braesicke, P., Dalvi, M., Morgenstern, O., O'Connor, F. M., Richards, N. A. D., and Pyle, J. A.: Implementation of the Fast-JX Photolysis scheme (v6.4) into the UKCA component of the MetUM chemistry-climate model (v7.3), Geosci. Model Dev., 6, 161–177, https://doi.org/10.5194/gmd-6-161-2013, 2013. a
Tolstikhin, I. O., Houlsby, N., Kolesnikov, A., Beyer, L., Zhai, X.,Unterthiner, T., Yung, J., Steiner, A., Keysers, D., Uszkoreit, J., Lucic, M., and Dosovitskiy, A.: Mlp-mixer: An all-mlp architecture for vision, arXiv [preprint], https://doi.org/10.48550/arXiv.2105.01601, 2021. a
Turnock, S. T., Allen, R. J., Andrews, M., Bauer, S. E., Deushi, M., Emmons, L., Good, P., Horowitz, L., John, J. G., Michou, M., Nabat, P., Naik, V., Neubauer, D., O'Connor, F. M., Olivié, D., Oshima, N., Schulz, M., Sellar, A., Shim, S., Takemura, T., Tilmes, S., Tsigaridis, K., Wu, T., and Zhang, J.: Historical and future changes in air pollutants from CMIP6 models, Atmos. Chem. Phys., 20, 14547–14579, https://doi.org/10.5194/acp-20-14547-2020, 2020. a, b, c, d
van Marle, M. J. E., Kloster, S., Magi, B. I., Marlon, J. R., Daniau, A.-L., Field, R. D., Arneth, A., Forrest, M., Hantson, S., Kehrwald, N. M., Knorr, W., Lasslop, G., Li, F., Mangeon, S., Yue, C., Kaiser, J. W., and van der Werf, G. R.: Historic global biomass burning emissions for CMIP6 (BB4CMIP) based on merging satellite observations with proxies and fire models (1750–2015), Geosci. Model Dev., 10, 3329–3357, https://doi.org/10.5194/gmd-10-3329-2017, 2017. a
Vaswani, A., Shazeer, N., Parmar, N., Uszkoreit, J., Jones, L., Gomez, A. N., Kaiser, Ł., and Polosukhin, I.: Attention is all you need, arXiv [preprint], https://doi.org/10.48550/arXiv.1706.03762, 2017. a
Voulgarakis, A., Wild, O., Savage, N. H., Carver, G. D., and Pyle, J. A.: Clouds, photolysis and regional tropospheric ozone budgets, Atmos. Chem. Phys., 9, 8235–8246, https://doi.org/10.5194/acp-9-8235-2009, 2009. a
Walters, D., Baran, A. J., Boutle, I., Brooks, M., Earnshaw, P., Edwards, J., Furtado, K., Hill, P., Lock, A., Manners, J., Morcrette, C., Mulcahy, J., Sanchez, C., Smith, C., Stratton, R., Tennant, W., Tomassini, L., Van Weverberg, K., Vosper, S., Willett, M., Browse, J., Bushell, A., Carslaw, K., Dalvi, M., Essery, R., Gedney, N., Hardiman, S., Johnson, B., Johnson, C., Jones, A., Jones, C., Mann, G., Milton, S., Rumbold, H., Sellar, A., Ujiie, M., Whitall, M., Williams, K., and Zerroukat, M.: The Met Office Unified Model Global Atmosphere 7.0/7.1 and JULES Global Land 7.0 configurations, Geosci. Model Dev., 12, 1909–1963, https://doi.org/10.5194/gmd-12-1909-2019, 2019. a
Wild, O. and Prather, M. J.: Global tropospheric ozone modeling: Quantifying errors due to grid resolution, J. Geophys. Res.-Atmos., 111, D11305, https://doi.org/10.1029/2005JD006605, 2006. a
Wild, O., Voulgarakis, A., O'Connor, F., Lamarque, J.-F., Ryan, E. M., and Lee, L.: Global sensitivity analysis of chemistry–climate model budgets of tropospheric ozone and OH: exploring model diversity, Atmos. Chem. Phys., 20, 4047–4058, https://doi.org/10.5194/acp-20-4047-2020, 2020. a
Wu, S., Mickley, L. J., Jacob, D. J., Logan, J. A., Yantosca, R. M., and Rind, D.: Why are there large differences between models in global budgets of tropospheric ozone?, J. Geophys. Res.-Atmos., 112, D05302, https://doi.org/10.1029/2006JD007801, 2007. a
Young, P. J., Naik, V., Fiore, A. M., Gaudel, A., Guo, J., Lin, M., Neu, J., Parrish, D., Rieder, H., Schnell, J., Tilmes, S., Wild, O., Zhang, L., Ziemke, J., Brandt, J., Delcloo, A., Doherty, R. M., Geels, C., Hegglin, M. I., Hu, L., Kumar, U. Im, R., Luhar, A., Murray, L., Plummer, D., Rodriguez, J., Saiz-Lopez, A., Schultz, M. G., Woodhouse, M. T., and Zeng, G.: Tropospheric Ozone Assessment Report: Assessment of global-scale model performance for global and regional ozone distributions, variability, and trends, Elementa, 6, 10, https://doi.org/10.1525/elementa.265, 2018. a, b
Zhang, Y.: Online-coupled meteorology and chemistry models: history, current status, and outlook, Atmos. Chem. Phys., 8, 2895–2932, https://doi.org/10.5194/acp-8-2895-2008, 2008. a