<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" xml:lang="en" dtd-version="3.0" article-type="research-article">
  <front>
    <journal-meta><journal-id journal-id-type="publisher">ACP</journal-id><journal-title-group>
    <journal-title>Atmospheric Chemistry and Physics</journal-title>
    <abbrev-journal-title abbrev-type="publisher">ACP</abbrev-journal-title><abbrev-journal-title abbrev-type="nlm-ta">Atmos. Chem. Phys.</abbrev-journal-title>
  </journal-title-group><issn pub-type="epub">1680-7324</issn><publisher>
    <publisher-name>Copernicus Publications</publisher-name>
    <publisher-loc>Göttingen, Germany</publisher-loc>
  </publisher></journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.5194/acp-21-12207-2021</article-id><title-group><article-title>Geometric estimation of volcanic eruption column height from GOES-R
near-limb imagery – Part 2: Case studies</article-title><alt-title>Geometric estimation of volcanic eruption column height – Part 2</alt-title>
      </title-group><?xmltex \runningtitle{Geometric estimation of volcanic eruption column height -- Part 2}?><?xmltex \runningauthor{\'{A}. Horv\'{a}th et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>Horváth</surname><given-names>Ákos</given-names></name>
          <email>akos.horvath@uni-hamburg.de</email><email>hfakos@gmail.com</email>
        <ext-link>https://orcid.org/0000-0002-5860-2368</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Girina</surname><given-names>Olga A.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0003-4918-2338</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Carr</surname><given-names>James L.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff4">
          <name><surname>Wu</surname><given-names>Dong L.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0002-3490-9437</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff5">
          <name><surname>Bril</surname><given-names>Alexey A.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff5">
          <name><surname>Mazurov</surname><given-names>Alexey A.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Melnikov</surname><given-names>Dmitry V.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff6">
          <name><surname>Hoshyaripour</surname><given-names>Gholam Ali</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Buehler</surname><given-names>Stefan A.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-6389-1160</ext-link></contrib>
        <aff id="aff1"><label>1</label><institution>Meteorological Institute, Universität Hamburg, Hamburg, Germany</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>Institute of Volcanology and Seismology, Far East Branch of the
Russian Academy of Sciences (IVS FEB RAS), Petropavlovsk-Kamchatsky, Russia</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>Carr Astronautics, Greenbelt, MD, USA</institution>
        </aff>
        <aff id="aff4"><label>4</label><institution>NASA Goddard Space Flight Center, Greenbelt, MD, USA</institution>
        </aff>
        <aff id="aff5"><label>5</label><institution>Space Research Institute of the Russian Academy of Sciences (SRI RAS),
Moscow, Russia</institution>
        </aff>
        <aff id="aff6"><label>6</label><institution>Institute of Meteorology and Climate Research, Karlsruhe Institute of
Technology (KIT), Karlsruhe, Germany</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">Ákos Horváth (akos.horvath@uni-hamburg.de, hfakos@gmail.com)</corresp></author-notes><pub-date><day>16</day><month>August</month><year>2021</year></pub-date>
      
      <volume>21</volume>
      <issue>16</issue>
      <fpage>12207</fpage><lpage>12226</lpage>
      <history>
        <date date-type="received"><day>21</day><month>February</month><year>2021</year></date>
           <date date-type="rev-request"><day>23</day><month>March</month><year>2021</year></date>
           <date date-type="rev-recd"><day>2</day><month>July</month><year>2021</year></date>
           <date date-type="accepted"><day>6</day><month>July</month><year>2021</year></date>
      </history>
      <permissions>
        <copyright-statement>Copyright: © 2021 </copyright-statement>
        <copyright-year>2021</copyright-year>
      <license license-type="open-access"><license-p>This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this licence, visit <ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/licenses/by/4.0/">https://creativecommons.org/licenses/by/4.0/</ext-link></license-p></license></permissions><self-uri xlink:href="https://acp.copernicus.org/articles/.html">This article is available from https://acp.copernicus.org/articles/.html</self-uri><self-uri xlink:href="https://acp.copernicus.org/articles/.pdf">The full text article is available as a PDF file from https://acp.copernicus.org/articles/.pdf</self-uri>
      <abstract><title>Abstract</title>
    <p id="d1e189">In a companion paper (Horváth et al., 2021), we
introduced a new technique to estimate volcanic eruption column height from
extremely oblique near-limb geostationary views. The current paper
demonstrates and validates the technique in a number of recent eruptions,
ranging from ones with weak columnar plumes to subplinian events with
massive umbrella clouds and overshooting tops that penetrate the
stratosphere. Due to its purely geometric nature, the new method is shown to
be unaffected by the limitations of the traditional brightness temperature
method, such as height underestimation in subpixel and semitransparent
plumes, ambiguous solutions near the tropopause temperature inversion, or
the lack of solutions in undercooled plumes. The side view height estimates
were in good agreement with plume heights derived from ground-based video
and satellite stereo observations, suggesting they can be a useful
complement to established techniques.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <label>1</label><title>Introduction</title>
      <p id="d1e201">In Part 1 (Horváth et al., 2021), we gave a detailed description of our geometric method that
exploits the near-limb portion of daytime geostationary imagery to derive
point estimates of eruption column height in the vicinity of the vent. Such
oblique observations offer close-to-orthogonal side views of vertical
columns protruding from the Earth ellipsoid and thereby facilitate a simple
height-by-angle technique. In principle, the method can be applied to data
from any geostationary instrument, but in practice it is best suited to the
latest-generation Advanced Baseline Imager (ABI) aboard the Geostationary
Operational Environmental Satellite-R (GOES-R) series and the almost
identical Advanced Himawari Imager (AHI) aboard the Himawari third-generation satellites. The ABI and AHI provide currently the finest visible
channel geostationary imagery (500 m resolution at the subsatellite point)
and, in the case of the former, best-in-class georegistration. Part 1 also
included a preliminary validation by using the proposed method to determine
the height of known Kamchatkan mountain peaks identified in GOES-17 images.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1" specific-use="star"><?xmltex \currentcnt{1}?><?xmltex \def\figurename{Figure}?><label>Figure 1</label><caption><p id="d1e206">GOES-17 (solid red) and Himawari-8 (dashed blue) view
geometry for our case study volcanoes (triangles). View zenith angle for
<bold>(a)</bold> Sheveluch (S), Bezymianny (B), Karymsky (K), and Raikoke (R),
as well as <bold>(c)</bold> Ulawun (U). The corresponding view azimuth angle measured
clockwise from north (<inline-formula><mml:math id="M1" display="inline"><mml:mo lspace="0mm">+</mml:mo></mml:math></inline-formula>) for GOES-17 and counterclockwise from north (<inline-formula><mml:math id="M2" display="inline"><mml:mo lspace="0mm">-</mml:mo></mml:math></inline-formula>) for
Himawari-8 is given in panels <bold>(b)</bold> and <bold>(d)</bold>.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f01.png"/>

      </fig>

      <p id="d1e242">In Part 2, we apply the side view height estimation to seven volcanic
eruptions from 2019 and 2020, which were observed by GOES-17 near the limb
of the full disk image. Our goal is to further test the method and
demonstrate its strengths and limitations in a variety of cases that
represent a range of explosivity, plume morphology, and observing
conditions. The side view plume heights are compared with heights from the
basic temperature method, GOES-17–Himawari-8 stereo retrievals, and where
available estimates from ground-based video footage.</p>
</sec>
<?pagebreak page12208?><sec id="Ch1.S2">
  <label>2</label><title>Notes on VolSatView and the GOES-17 loop heat pipe anomaly</title>
      <p id="d1e253">Two technical points are worth mentioning about the temperature methods used
for comparison. First, the VolSatView information system (Bril et al., 2019;
Girina et al., 2018; Gordeev et al. 2016) operated by the Kamchatka Volcanic
Eruption Response Team (KVERT) derives plume heights from Himawari-8 11 <inline-formula><mml:math id="M3" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m brightness temperatures (BT<inline-formula><mml:math id="M4" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>). The algorithm uses forecast profiles
from the Historical Unidata Internet Data Distribution (IDD) Gridded Model
Data archive, given at 1<inline-formula><mml:math id="M5" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> spatial and 3 h temporal resolution.
A temperature profile is interpolated to the geographic location and
acquisition time of a pixel, and then plume height is set to the interpolated
profile altitude whose temperature matches the measured BT<inline-formula><mml:math id="M6" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>. A
standard atmosphere profile can alternatively be selected for the
retrievals, a choice often exercised to mitigate height underestimation in
small thin plumes.</p>
      <p id="d1e291">Second, we also estimate plume height by matching Himawari-8 and GOES-17
dark pixel BT<inline-formula><mml:math id="M7" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> to ERA5 temperature profiles. The GOES-17 ABI
unfortunately suffered a loop heat pipe (LHP) anomaly, which prevented
cooling the thermal focal plane to its operational temperature. After a
number of performance recovery steps, 97 % of imaging capability in the
thermal infrared bands was regained (McCorkel et al., 2019). To minimize any
potential effects of the LHP anomaly on our results, we only use ABI
brightness temperatures with a data quality flag (DQF) of 0, indicating
“good pixels”.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2" specific-use="star"><?xmltex \currentcnt{2}?><?xmltex \def\figurename{Figure}?><label>Figure 2</label><caption><p id="d1e305">GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M8" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification) of the 8 April 2020 eruption of Sheveluch at <bold>(a)</bold> 19:10 UTC, <bold>(b)</bold> 19:20 UTC, <bold>(c)</bold> 19:30 UTC,
and <bold>(d)</bold> 19:10 UTC with plume geometry indicated. The images were rotated
clockwise by the geodetic colatitude angle; south is left, north is right,
west is up, and east is down. The red and black diamonds respectively mark the
base and vent of Young Sheveluch. In panel <bold>(d)</bold>, the umbrella cloud is fitted
with a circle of 5.9 km radius (distorted into an ellipse in the fixed grid
view), and the blue diamond is our best visual estimate plume top position
above the vent.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f02.png"/>

      </fig>

</sec>
<sec id="Ch1.S3">
  <label>3</label><title>Case studies</title>
      <p id="d1e345">We analyze eruption plumes from Sheveluch (also known as Shiveluch), Bezymianny, and Karymsky in
Kamchatka, Raikoke in the Kuril Islands, and Ulawun in Papua New Guinea, all
located near the limb of the GOES-17 full disk image. The GOES-17 and
Himawari-8 view geometries for these volcanoes are plotted in Fig. 1.
GOES-17 observes the volcanoes in Kamchatka and the Kuril Islands from
east-southeast at very oblique view zenith angles (VZAs) of
83–86<inline-formula><mml:math id="M9" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>, while Himawari-8 observes them
from south-southwest at much smaller VZAs of 57–67<inline-formula><mml:math id="M10" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>. Ulawun, situated slightly<?pagebreak page12209?> south of the Equator, is
viewed almost exactly from the east at a VZA of 80<inline-formula><mml:math id="M11" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> by
GOES-17 and from the northwest at a near-nadir VZA of 14<inline-formula><mml:math id="M12" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> by
Himawari-8.</p>
<sec id="Ch1.S3.SS1">
  <label>3.1</label><title>Sheveluch, 8 April 2020</title>
      <p id="d1e391">As briefly discussed in Part 1, an explosive eruption of the volcano
occurred on 8 April 2020 sometime between 19:00 and 19:10 UTC, slightly
after sunrise (solar zenith angle <inline-formula><mml:math id="M13" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 84<inline-formula><mml:math id="M14" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>). The
Kamchatka Volcanic Eruption Response Team (KVERT) issued an orange-coded
Volcano Observatory Notice for Aviation (VONA 2020-40,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2020-40</uri>, last access: 10 August 2021), reporting a plume height
of 9.5–10.0 km as determined by the basic temperature method from
Himawari-8 11 <inline-formula><mml:math id="M15" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m data. This eruption is well suited to a detailed
analysis, because it produced a single puff in a weak wind field, resulting
in a nearly vertical eruption column with minimal bending and an
isotropically spread umbrella cloud (strong plume). The GOES-17 visible band
fixed grid images covering the eruption and the initial evolution of the
plume between 19:10–19:30 UTC are plotted in Fig. 2a–c, while the estimated
eruption geometry is sketched in Fig. 2d. The advection and dispersion of
the plume in the first 5 h after the eruption are depicted in
Supplement Animation 1, which shows the GOES-17 and Himawari-8 images in
equirectangular map projection as well as the GOES-17 fixed grid
view – degassing and a weak plume from Klyuchevskoy, especially after 23:00 UTC, is also evident. The Himawari-8 fixed grid view is not dramatically
different from the equirectangular map thanks to the smaller view zenith
angles and, hence, is excluded.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><?xmltex \currentcnt{3}?><?xmltex \def\figurename{Figure}?><label>Figure 3</label><caption><p id="d1e423">Effect of shifting the plane of isoheights, illustrated
on the 19:10 UTC GOES-17 band 2 image of the 8 April 2020 eruption of
Sheveluch. In all three panels the solid white line is the circular fit to
the umbrella cloud from Fig. 2d, and the dashed white line is the surface
projection of that fit. The baseline (zero line) of the isoheights (red
diamond and black line) is fixed to <bold>(a)</bold> the westernmost point of
the surface-projected fit, <bold>(b)</bold> the volcano base (default) or
equivalently the center of the surface-projected fit, and <bold>(c)</bold> the
easternmost point of the surface-projected fit. Shifting the plane of the
isoheights in panels <bold>(a)</bold> and <bold>(c)</bold> back and forth compared
to panel <bold>(b)</bold> roughly accounts for the westward/eastward expansion
of the far side/near side of the umbrella cloud. With such base adjustments,
the isoheights consistently indicate an elevation of <inline-formula><mml:math id="M16" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km
for the middle as well as the edges of the umbrella cloud.</p></caption>
          <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f03.png"/>

        </fig>

      <p id="d1e458">As shown, the plume was advected south-southeast by the wind and eventually
drifted over the ocean. The gradual tilting of the plume and expansion of
the umbrella cloud are apparent in the 19:20–19:30 UTC fixed grid images,
which also hint at faint ash fallstreaks underneath the southern half of the
umbrella cloud. The animation vividly demonstrates the vastly different and
complementary perspectives offered by GOES-17 and Himawari-8: the former
observes the plume from the east-southeast (<inline-formula><mml:math id="M17" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 114<inline-formula><mml:math id="M18" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> azimuth) at very oblique view zenith angle (VZA,
<inline-formula><mml:math id="M19" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 84<inline-formula><mml:math id="M20" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>), while the latter provides a view from
the south-southwest (about <inline-formula><mml:math id="M21" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>156<inline-formula><mml:math id="M22" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> azimuth) at much smaller
but still considerable VZA (<inline-formula><mml:math id="M23" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 67<inline-formula><mml:math id="M24" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>). For
GOES-17 near-limb data the fixed grid image is a more natural and
easier-to-interpret representation than equirectangular remapping, which
suffers from extreme zonal stretching. A notable consequence of the
different view geometries is that the dispersing plume becomes
semitransparent in Himawari-8 images by the time it reaches the ocean, but
it remains opaque in GOES-17 images due to the longer slant path. The
GOES-17 fixed grid side view clearly shows the advecting ash volume
splitting into two vertically distinct layers due to wind shear: a faster
moving upper layer of the umbrella cloud and a slower moving lower layer
that developed from the “stem” of the initial mushroom cloud. The<?pagebreak page12210?> superior
georegistration of GOES-17 compared to Himawari-8 is also apparent in the
time-lapse imagery.</p>
      <p id="d1e527">The geometry of the plume at the time of the eruption is sketched in Fig. 2d. As shown in Fig. 10d of Part 1 and also in Fig. 3 of the current paper,
the side view method yields a plume height of <inline-formula><mml:math id="M25" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km above the
ellipsoid and, thus, a column height of <inline-formula><mml:math id="M26" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 5.5 km above the
vent. The umbrella cloud can be reasonably well fitted with a circle of
<inline-formula><mml:math id="M27" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 5.9 km radius, which appears distorted as a large
eccentricity ellipse near the limb of the fixed grid projection. The
geographical coordinates of the fitted finite circle are calculated from the
direct solution on the sphere as described by Bildirici and Ulugtekin (2011)
and Bildirici (2015). Such geometry estimates offered by the oblique side
view might be useful in the evaluation of plume simulations. For example,
the radius-to-height aspect ratio of <inline-formula><mml:math id="M28" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 1.07 determined for
this plume is in good agreement with the <inline-formula><mml:math id="M29" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 1.06 near-field
aspect ratio obtained by Burton et al. (2020) in their idealized simulations
of a buoyant gas plume in a quiescent atmosphere. The ERA5 profiles show
north-northwesterly winds that increase from 4 to 9 m s<inline-formula><mml:math id="M30" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>
between the vent and the plume top. The average plume rise speed is
<inline-formula><mml:math id="M31" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.2 m s<inline-formula><mml:math id="M32" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, although this likely is an underestimate
because the plume reached its maximum altitude in less than 10 min, as
evidenced by the spread of the umbrella cloud. Compared to the layer-mean
wind of <inline-formula><mml:math id="M33" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.5 m s<inline-formula><mml:math id="M34" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> this rise speed indicates a strong
eruption; as a result, the center of the plume was shifted south of the vent
by only <inline-formula><mml:math id="M35" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 2.5 km at 19:10 UTC.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4" specific-use="star"><?xmltex \currentcnt{4}?><?xmltex \def\figurename{Figure}?><label>Figure 4</label><caption><p id="d1e625">Equirectangular map projection of the 19:10 UTC
<bold>(a)</bold> GOES-17 band 2 and <bold>(b)</bold> Himawari-8 band 3 image of the
8 April 2020 eruption of Sheveluch. The red and black triangles mark the
volcano base and the vent, respectively. The green dot indicates the start
point of the visible shadow, which for the Himawari-8 image is nearly the
same as the vent location (thus, the black triangle is not shown in panel <bold>b</bold>), while the yellow dot is the shadow terminus on the cloud
layer. The yellow triangle is the estimated position of the shadow terminus
had it been cast directly on the surface without the intervening cloud
layer. The blue and cyan dots respectively correspond to the center and the
westernmost edge of the umbrella cloud; the GOES-17 image location of the
plume center is shown in the Himawari-8 image too. Double-headed arrows
indicate the ellipsoid-projected distance and direction between the points
matching the color of the arrowheads. The white arrow marks the shadow of
the low-level cloud layer on which the eruption column casts its shadow. The
true and map distorted view azimuths at the volcano base (<inline-formula><mml:math id="M36" display="inline"><mml:mrow><mml:mi mathvariant="italic">ϕ</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">114</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M37" display="inline"><mml:mrow><mml:mi mathvariant="italic">ϕ</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">104</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> for GOES-17, and <inline-formula><mml:math id="M38" display="inline"><mml:mrow><mml:mi mathvariant="italic">ϕ</mml:mi><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">156</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula>
and <inline-formula><mml:math id="M39" display="inline"><mml:mrow><mml:mi mathvariant="italic">ϕ</mml:mi><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">141</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> for Himawari-8) as well as the mapped solar azimuth
(<inline-formula><mml:math id="M40" display="inline"><mml:mrow><mml:mi mathvariant="italic">ϕ</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">86</mml:mn><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula>, little distortion) are also indicated.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f04.png"/>

        </fig>

      <p id="d1e728">The side view method requires the plume top position right above the vent.
Our visual estimate of this point is marked by the blue diamond in Fig. 2d,
which lies halfway between the far-side (western) and near-side (eastern)
edges of the umbrella cloud. When the isoheights are drawn relative to the
volcano base (default), this plume location yields a height estimate of
<inline-formula><mml:math id="M41" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km, as shown in Fig. 3b. The far-side and near-side plume
edges, however, appear at <inline-formula><mml:math id="M42" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9 and <inline-formula><mml:math id="M43" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7 km,
respectively, due to retrieval biases caused by the radial expansion as
explained in Sect. 4.1 of Part 1. The latitudinal (south–north or
left–right) expansion/advection of the plume, in contrast, has little effect
on the height estimates. The far-side/near-side plume edge is located
behind/in front of the plane of isoheights drawn in Fig. 3b. These height
biases due to the westward/eastward plume expansion can be roughly corrected
for by shifting the isoheights plane accordingly, as demonstrated in Fig. 3a
and c. Shifting the baseline (zero line) to the westernmost (Fig. 3a)
or easternmost (Fig. 3c) point of the surface projection of the circular
plume top fit (white dashed line) leads to height estimates of
<inline-formula><mml:math id="M44" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km for the edges of the umbrella cloud too.</p>

<?xmltex \floatpos{p}?><table-wrap id="Ch1.T1" specific-use="star"><?xmltex \currentcnt{1}?><label>Table 1</label><caption><p id="d1e762">Case study plume height estimates, in kilometer and rounded to the
nearest hectometer, derived from GOES-17 (G17) and Himawari-8 (Hi8)
satellite data or webcam/quadcopter footage. The retrieval methods are
described in Part 1. The three traditional geometric methods are as follows.
Method 1 (M1): sensor-projected length, method 2 (M2): true (stick) shadow
length, and method 3 (M3): edge shadow length; method 3 can also be applied
in “stereo mode” using the parallax between the GOES-17 and Himawari-8 image
locations of a given plume feature. Height is also estimated by matching the
minimum 11 <inline-formula><mml:math id="M45" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m brightness temperature (BT<inline-formula><mml:math id="M46" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>) to the ERA5
temperature profile; if the reanalysis profile yields no solution due to
plume undercooling (X), the height derived from the U.S. Standard Atmosphere
1976 temperature profile is given instead in parenthesis. VolSatView (VSV)
is the temperature method used by KVERT. The last column is the new
geometric side view estimate, obtained from GOES-17 fixed grid imagery.</p></caption><oasis:table frame="topbot"><?xmltex \begin{scaleboxenv}{.95}[.95]?><oasis:tgroup cols="13">
     <oasis:colspec colnum="1" colname="col1" align="justify" colwidth="3cm"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:colspec colnum="8" colname="col8" align="right"/>
     <oasis:colspec colnum="9" colname="col9" align="right"/>
     <oasis:colspec colnum="10" colname="col10" align="right"/>
     <oasis:colspec colnum="11" colname="col11" align="right"/>
     <oasis:colspec colnum="12" colname="col12" align="right"/>
     <oasis:colspec colnum="13" colname="col13" align="right"/>
     <oasis:thead>
       <oasis:row>
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9"/>
         <oasis:entry colname="col10"/>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">Side</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">M1</oasis:entry>
         <oasis:entry colname="col3">M1</oasis:entry>
         <oasis:entry colname="col4">M2</oasis:entry>
         <oasis:entry colname="col5">M2</oasis:entry>
         <oasis:entry colname="col6">M3</oasis:entry>
         <oasis:entry colname="col7">M3</oasis:entry>
         <oasis:entry colname="col8">M3 stereo</oasis:entry>
         <oasis:entry colname="col9">BT<inline-formula><mml:math id="M49" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col10">BT<inline-formula><mml:math id="M50" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col11">VSV</oasis:entry>
         <oasis:entry colname="col12">Webcam/</oasis:entry>
         <oasis:entry colname="col13">view</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">G17</oasis:entry>
         <oasis:entry colname="col3">Hi8</oasis:entry>
         <oasis:entry colname="col4">G17</oasis:entry>
         <oasis:entry colname="col5">Hi8</oasis:entry>
         <oasis:entry colname="col6">G17</oasis:entry>
         <oasis:entry colname="col7">Hi8</oasis:entry>
         <oasis:entry colname="col8">G17–Hi8</oasis:entry>
         <oasis:entry colname="col9">G17</oasis:entry>
         <oasis:entry colname="col10">Hi8</oasis:entry>
         <oasis:entry colname="col11">Hi8</oasis:entry>
         <oasis:entry colname="col12">quadcopter</oasis:entry>
         <oasis:entry colname="col13">G17</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">Sheveluch</oasis:entry>
         <oasis:entry colname="col2">8.2</oasis:entry>
         <oasis:entry colname="col3">7.9</oasis:entry>
         <oasis:entry colname="col4">8.0<inline-formula><mml:math id="M51" display="inline"><mml:msup><mml:mi/><mml:mtext>a</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col5">8.3<inline-formula><mml:math id="M52" display="inline"><mml:msup><mml:mi/><mml:mtext>a</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col6">7.6<inline-formula><mml:math id="M53" display="inline"><mml:msup><mml:mi/><mml:mtext>a</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col7">7.8<inline-formula><mml:math id="M54" display="inline"><mml:msup><mml:mi/><mml:mtext>a</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col8">8.0</oasis:entry>
         <oasis:entry colname="col9">6.8</oasis:entry>
         <oasis:entry colname="col10">7.6, 11.0,</oasis:entry>
         <oasis:entry colname="col11">9.6</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">8.0</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">2020-04-08, 19:10Z</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9"/>
         <oasis:entry colname="col10">14.0</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13"/>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Sheveluch <?xmltex \hack{\hfill\break}?>2019-04-10, 03:00Z</oasis:entry>
         <oasis:entry colname="col2">7.1</oasis:entry>
         <oasis:entry colname="col3">6.9</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">7.0</oasis:entry>
         <oasis:entry colname="col9">4.6</oasis:entry>
         <oasis:entry colname="col10">4.5</oasis:entry>
         <oasis:entry colname="col11">6.5</oasis:entry>
         <oasis:entry colname="col12">7.0</oasis:entry>
         <oasis:entry colname="col13">7.2</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Sheveluch <?xmltex \hack{\hfill\break}?>2019-08-29, 03:10Z</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9">X / (10.6)</oasis:entry>
         <oasis:entry colname="col10">X / (10.4)</oasis:entry>
         <oasis:entry colname="col11">10.5</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">10.8</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Sheveluch <?xmltex \hack{\hfill\break}?>2019-08-30, 08:00Z</oasis:entry>
         <oasis:entry colname="col2">7.3</oasis:entry>
         <oasis:entry colname="col3">7.0</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">6.8</oasis:entry>
         <oasis:entry colname="col9">5.0</oasis:entry>
         <oasis:entry colname="col10">4.7</oasis:entry>
         <oasis:entry colname="col11">6.5</oasis:entry>
         <oasis:entry colname="col12">7.0–7.5</oasis:entry>
         <oasis:entry colname="col13">7.2</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Karymsky <?xmltex \hack{\hfill\break}?>2019-08-14, 04:30Z</oasis:entry>
         <oasis:entry colname="col2">6.8</oasis:entry>
         <oasis:entry colname="col3">7.0</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">6.9, 7.3</oasis:entry>
         <oasis:entry colname="col9">5.9</oasis:entry>
         <oasis:entry colname="col10">5.5</oasis:entry>
         <oasis:entry colname="col11">4.7</oasis:entry>
         <oasis:entry colname="col12">4.0-4.5</oasis:entry>
         <oasis:entry colname="col13">7.1</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Bezymianny <?xmltex \hack{\hfill\break}?>2020-10-21, 20:30Z</oasis:entry>
         <oasis:entry colname="col2">9.4</oasis:entry>
         <oasis:entry colname="col3">8.7</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">9.1</oasis:entry>
         <oasis:entry colname="col9">6.4</oasis:entry>
         <oasis:entry colname="col10">6.8</oasis:entry>
         <oasis:entry colname="col11">7.7</oasis:entry>
         <oasis:entry colname="col12">9.0</oasis:entry>
         <oasis:entry colname="col13">9.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Bezymianny <?xmltex \hack{\hfill\break}?>2020-10-21, 20:40Z</oasis:entry>
         <oasis:entry colname="col2">13.5</oasis:entry>
         <oasis:entry colname="col3">12.4</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">13.1</oasis:entry>
         <oasis:entry colname="col9">8.5, 19.7</oasis:entry>
         <oasis:entry colname="col10">8.9, 12.6</oasis:entry>
         <oasis:entry colname="col11">10.6</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">13.2</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Bezymianny <?xmltex \hack{\hfill\break}?>2020-10-21, 20:50Z <?xmltex \hack{\hfill\break}?>overshooting top</oasis:entry>
         <oasis:entry colname="col2">15.7</oasis:entry>
         <oasis:entry colname="col3">15.5</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">15.2</oasis:entry>
         <oasis:entry colname="col9">8.6, 19.5</oasis:entry>
         <oasis:entry colname="col10">9.1, 11.2</oasis:entry>
         <oasis:entry colname="col11">10.7</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">15.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Ulawun <?xmltex \hack{\hfill\break}?>2019-06-26, 06:10Z <?xmltex \hack{\hfill\break}?>overshooting top</oasis:entry>
         <oasis:entry colname="col2">21.5</oasis:entry>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">21.3</oasis:entry>
         <oasis:entry colname="col9">16.1, 17.6</oasis:entry>
         <oasis:entry colname="col10">X / (X)</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">22.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Ulawun <?xmltex \hack{\hfill\break}?>2019-06-26, 07:00Z <?xmltex \hack{\hfill\break}?>umbrella cloud</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9">16.4, 17.1</oasis:entry>
         <oasis:entry colname="col10">16.5, 16.9</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">18.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">Raikoke <?xmltex \hack{\hfill\break}?>2019-06-21, 19:40Z</oasis:entry>
         <oasis:entry colname="col2">9.7</oasis:entry>
         <oasis:entry colname="col3">10.0</oasis:entry>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5">9.6<inline-formula><mml:math id="M55" display="inline"><mml:msup><mml:mi/><mml:mtext>b</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7">9.8<inline-formula><mml:math id="M56" display="inline"><mml:msup><mml:mi/><mml:mtext>b</mml:mtext></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col8">10.0</oasis:entry>
         <oasis:entry colname="col9">6.1</oasis:entry>
         <oasis:entry colname="col10">6.5</oasis:entry>
         <oasis:entry colname="col11">8.8</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">9.9</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raikoke</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">11.6</oasis:entry>
         <oasis:entry colname="col9">9.4</oasis:entry>
         <oasis:entry colname="col10">10.7, 12.2,</oasis:entry>
         <oasis:entry colname="col11">10.0</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">11.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">2019-06-21, 22:00Z</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9"/>
         <oasis:entry colname="col10">13.7, 23.7</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13"/>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raikoke</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">16.1</oasis:entry>
         <oasis:entry colname="col9">11.3, 14.7, <?xmltex \hack{\hfill\break}?></oasis:entry>
         <oasis:entry colname="col10">X / (X)</oasis:entry>
         <oasis:entry colname="col11">11.1</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">16.5</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">2019-06-22, 01:20Z <?xmltex \hack{\hfill\break}?>overshooting top</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9">22.5</oasis:entry>
         <oasis:entry colname="col10"/>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13"/>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raikoke</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">15.8</oasis:entry>
         <oasis:entry colname="col9">10.4, 12.2,</oasis:entry>
         <oasis:entry colname="col10">10.4, 12.5,</oasis:entry>
         <oasis:entry colname="col11">10.1</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">15.6</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">2019-06-22, 03:50Z <?xmltex \hack{\hfill\break}?>overshooting top</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9">14.1, 23.1</oasis:entry>
         <oasis:entry colname="col10">13.8, 23.4</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13"/>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raikoke</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">13.7</oasis:entry>
         <oasis:entry colname="col9">10.4, 12.2,</oasis:entry>
         <oasis:entry colname="col10">10.4, 12.5,</oasis:entry>
         <oasis:entry colname="col11">10.1</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">13.0–</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1">2019-06-22, 03:50Z <?xmltex \hack{\hfill\break}?>umbrella cloud</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9">14.1, 23.1</oasis:entry>
         <oasis:entry colname="col10">13.8, 23.4</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">14.0</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Raikoke</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8">14.6</oasis:entry>
         <oasis:entry colname="col9">9.7</oasis:entry>
         <oasis:entry colname="col10">10.4, 12.4</oasis:entry>
         <oasis:entry colname="col11">10.2</oasis:entry>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13">14.5</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">2019-06-22, 05:30Z</oasis:entry>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4"/>
         <oasis:entry colname="col5"/>
         <oasis:entry colname="col6"/>
         <oasis:entry colname="col7"/>
         <oasis:entry colname="col8"/>
         <oasis:entry colname="col9"/>
         <oasis:entry colname="col10">13.4, 22.8</oasis:entry>
         <oasis:entry colname="col11"/>
         <oasis:entry colname="col12"/>
         <oasis:entry colname="col13"/>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup><?xmltex \end{scaleboxenv}?></oasis:table><?xmltex \begin{scaleboxenv}{.95}[.95]?><table-wrap-foot><p id="d1e782"><inline-formula><mml:math id="M47" display="inline"><mml:msup><mml:mi/><mml:mtext>a</mml:mtext></mml:msup></mml:math></inline-formula> Low-level CTH estimate of 1.2 km added.
<inline-formula><mml:math id="M48" display="inline"><mml:msup><mml:mi/><mml:mtext>b</mml:mtext></mml:msup></mml:math></inline-formula> Low-level CTH estimate of 0.7 km added.</p></table-wrap-foot><?xmltex \end{scaleboxenv}?></table-wrap>

      <p id="d1e1875">The side view height estimate can be compared with estimates from
traditional geometric methods (see Sect. 3 of Part 1), which are listed
for the current and all subsequent eruptions in Table 1. The GOES-17 and
Himawari-8 visible band images at 19:10 UTC are plotted in equirectangular
map projection in Fig. 4. The location of characteristic features of the
plume and its shadow, as well as the vectors between these points, are also
indicated. Compared to Himawari-8, the GOES-17 image of the low-level cloud
layer is rather blurred and shows little detail due to the large near-limb
GIFOV (ground-projected instantaneous field of view). More detail and
texture are seen in the image of the vertical eruption column and the
mountains thanks to the fine VIFOV (vertically projected instantaneous field
of view), but the equirectangular remapping generally suffers from extreme
zonal stretching near the limb. This zonal stretching also leads to
non-negligible azimuth distortions, which have to be considered when
measuring distances and directions between points (see Sect. 3.5 in Part 1). For example, there is a 10<inline-formula><mml:math id="M57" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>/15<inline-formula><mml:math id="M58" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> difference between
the true and mapped view azimuths for GOES-17/Himawari-8. The true solar
azimuth is close to east and thus has small (1–2<inline-formula><mml:math id="M59" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>)
distortion.</p>
      <?pagebreak page12212?><p id="d1e1906">Height can be estimated from the sensor-projected column length measured
along the map distorted view azimuth (method 1). The good alignment of the
map projection of the eruption column with the distorted view azimuth
direction indicates little tilting and advection relative to the vent. The
ellipsoid distance between the volcano base (red triangle) and the plume
center (or center of the fitted circle, blue dot) is respectively
<inline-formula><mml:math id="M60" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 75.7 and <inline-formula><mml:math id="M61" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 18.8 km for GOES-17 and
Himawari-8. Here the distance to the center of the umbrella cloud is needed,
because taking plume edge points would lead to under- or overestimation,
similar to the side view method. These measured lengths combined with the
corresponding view zenith angles lead to height estimates of <inline-formula><mml:math id="M62" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.2 and <inline-formula><mml:math id="M63" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.9 km.</p>
      <p id="d1e1937">For the special case of a vertical column, height can similarly be estimated
from the true (stick) shadow length (method 2), which, however, is a more
challenging technique<?pagebreak page12213?> in practice. Determining the exact location of the
shadow terminus can be difficult due to the blurring effect of the penumbra,
the lighter outer part of the shadow where the sun disk is only partially
blocked. For the GOES-17 near-limb view, this is compounded by the large
GIFOV and severe map distortions. In this particular case, part of the true
shadow is also obscured in the GOES-17 image by the eruption column itself,
because the satellite is close to the principal plane and on the same side
as the rising sun. Finally, the shadow of the eruption column is cast on a
cloud layer rather than on the surface and hence corresponds to height above
the cloud. This, however, is a relatively minor nuisance, because accounting
for the height of a flat low-level cloud layer is no more error prone than
the handling of the complex local topography would be under clear-sky
conditions.</p>
      <p id="d1e1940">The height of the cloud layer, which we assume constant over the scene, can
be estimated from the length (<inline-formula><mml:math id="M64" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 10.3 km) and direction of its
shadow. The cloud shadow is visible in the Himawari-8 image (marked by the
double-headed white arrow) but invisible from the particular sun-view
geometry of GOES-17. In order to avoid topography effects, we actually
measured the cloud edge shadow over the ocean, northeast of the land shadow
used for illustration in Fig. 4b. Applying method 3 to this edge shadow
measurement yields a cloud top height (CTH) of <inline-formula><mml:math id="M65" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 1.2 km. The
ERA5 profiles indicate a low-level temperature inversion over the ocean,
between 0.93 and 1.36 km. Considering that marine stratus tends to be
located near the base of the temperature inversion and has a typical
thickness of 200–300 m, the CTH estimated by the edge shadow method seems
reasonable.</p>
      <p id="d1e1957">The start point and end point of the visible plume shadow are marked by the green
and yellow dots, respectively. The start point observed in the Himawari-8
image is the actual shadow start point, i.e., the vent location, which leads to an
observed (full) shadow length of <inline-formula><mml:math id="M66" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 77.7 km. In contrast, the
beginning portion of the shadow (between the black triangle of the vent and
the green dot in Fig. 4a) is obscured by the eruption column itself from the
GOES-17 perspective, and thus the observed shadow length is a shorter
<inline-formula><mml:math id="M67" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 68.5 km. The distance between the vent and the shadow
terminus (or deduced shadow length), however, is <inline-formula><mml:math id="M68" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 76.8 km in
the GOES-17 image, similar to the one actually observed by Himawari-8.
Plugging the Himawari-8-measured full shadow length and the corresponding
solar zenith angle into Eq. (2) of Part 1 yields a plume height of
<inline-formula><mml:math id="M69" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.1 km above the cloud layer or, by adding the CTH, a height
of <inline-formula><mml:math id="M70" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.3 km above the ellipsoid. Similarly, the full shadow
length deduced from, but not entirely observed in, GOES-17 data translates
to an above-ellipsoid height of <inline-formula><mml:math id="M71" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.0 km.</p>
      <p id="d1e2003">Here we note that the ellipsoid-projected location of the shadow terminus
that would be observed under cloud-free conditions (and no surface
topography) can be approximately determined from the sun-satellite geometry
and the estimated CTH. This clear-sky shadow end (marked by a yellow
triangle) can be obtained by (i) shifting the observed shadow end cast on
the cloud layer (yellow dot) in the direction opposite to the (map
distorted) view azimuth by a distance of CTH times the tangent of the view
zenith angle and then (ii) shifting this intermediate point in the solar
azimuth direction by a distance of CTH times the tangent of the solar zenith
angle. This backward and forward projection roughly removes the cloud height
parallax, which is responsible for the significantly different image
locations (yellow dots) of the cloud-top shadow end in GOES-17 and
Himawari-8 data. The discrepancy between the estimated clear-sky shadow end
image locations (yellow triangles) is much smaller. Using the distance
between the yellow triangles and the volcano base in Eq. (2) directly yields
the height above the ellipsoid; in our case a distance of <inline-formula><mml:math id="M72" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 92.0 km results in a height estimate of <inline-formula><mml:math id="M73" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.2 km.</p>
      <p id="d1e2020">The edge shadow technique (method 3), which is the generalization of the
previous stick shadow technique to a horizontally extensive suspended ash
layer, can also be used as a separate estimate for a vertical eruption
column. In this method, height is fixed by the length and direction of the
line segment connecting the plume edge to the shadow terminus; for a
suspended ash layer this line segment is the apparent (observed) shadow, but
for a narrow vertical column it actually runs through an unshadowed area
(see Sect. 3.3 in Part 1). As shown in Fig. 4, the distance between the
westernmost edge point of the umbrella cloud (cyan dot) and the shadow
terminus cast on the cloud layer (yellow dot) is <inline-formula><mml:math id="M74" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 37.6 km for
GOES-17 and <inline-formula><mml:math id="M75" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 80.0 km for Himawari-8. For the sun-satellite
geometry of the plotted images, these distances respectively correspond to
an above-cloud height of <inline-formula><mml:math id="M76" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.4 and <inline-formula><mml:math id="M77" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.6 km
or an above-ellipsoid height of <inline-formula><mml:math id="M78" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.6 and <inline-formula><mml:math id="M79" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.8 km. As before, considering the line segment between the plume edge and
the estimated clear-sky shadow end (cyan dot to yellow triangle) directly
yields similar above-ellipsoid height values, without the need to add the
CTH.</p>
      <p id="d1e2067">Finally, method 3 can also be applied in “stereo mode”, using as input the
GOES-17 and Himawari-8 image locations and sun-view geometry angles of the
center of the umbrella cloud (blue dots in Fig. 4b). The <inline-formula><mml:math id="M80" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 80.0 km parallax between these two sensor-projected locations is unaffected
by the presence of the low-level cloud layer and translates to an
above-ellipsoid height of <inline-formula><mml:math id="M81" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.0 km.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5" specific-use="star"><?xmltex \currentcnt{5}?><?xmltex \def\figurename{Figure}?><label>Figure 5</label><caption><p id="d1e2086">Band 14, 11.2 <inline-formula><mml:math id="M82" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m brightness temperature (BT<inline-formula><mml:math id="M83" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>)
image of the 8 April 2020 eruption of Sheveluch at 19:10 UTC from
<bold>(a)</bold> GOES-17 fixed grid data and <bold>(b)</bold> Himawari-8 CEReS
V20190123 gridded and resampled data (0.02<inline-formula><mml:math id="M84" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> or <inline-formula><mml:math id="M85" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 2 km resolution). The red triangle marks the volcano base. In panel <bold>(c)</bold> the black line is the ERA5 temperature profile above the vent
(2.5 km altitude). The red and blue shaded areas respectively indicate the
range of the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M86" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 19:10 UTC
(warmest dark pixel) and 19:50 UTC (coldest dark pixel).</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f05.png"/>

        </fig>

      <p id="d1e2147">It is difficult to put exact error bars on these height estimates, but an
uncertainty of a few hundred meters seems reasonable. The traditional
geometric methods use the flat earth approximation, which is usually
justified by evoking that the radius of earth is much greater than the
length of the shadow or that of the map-projected image of the eruption
column. Over the horizontal distances measured in Fig. 4 (maximum
<inline-formula><mml:math id="M87" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 90 km), the GOES-17 view zenith angle and the solar zenith
angle can change by up to <inline-formula><mml:math id="M88" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 0.7<inline-formula><mml:math id="M89" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> due to
earth's curvature. Near a zenith angle of 84<inline-formula><mml:math id="M90" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>, this change
leads to a <inline-formula><mml:math id="M91" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 12% change in the tangent function used to
convert distance to height. In our calculations, we used the average of the
zenith angles at (i) the volcano base and (ii) the shadow terminus<?pagebreak page12214?> or
sensor-projected plume top position, which is a first-order correction
for surface curvature. In fact, an advantage of the side view method, which
operates in angular space, is that it avoids the non-linear sensitivity to
the tangent function, which is a feature of the methods based on
surface-projected distances. The discussed difficulty in determining the
shadow terminus, neglecting refraction effects on solar zenith angle, and
spatial variations in the height of the low-level cloud layer represent
additional uncertainties for the shadow-based estimates. Nevertheless, the
height estimates from these alternative geometric techniques are consistent
with the side view estimate and cluster around <inline-formula><mml:math id="M92" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> <inline-formula><mml:math id="M93" display="inline"><mml:mrow><mml:mn mathvariant="normal">8</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.5</mml:mn></mml:mrow></mml:math></inline-formula> km.</p>
      <p id="d1e2209">The GOES-17 and Himawari-8 band 14, 11 <inline-formula><mml:math id="M94" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m brightness temperatures at
the eruption time of 19:10 UTC are plotted in Fig. 5a and b. The
thermal infrared channel has a resolution of <inline-formula><mml:math id="M95" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 2 km at the
subsatellite point. For the extensive low-level cloud layer around the
volcano, the GOES-17 BT<inline-formula><mml:math id="M96" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (252.1–253.1 K) is 3–4 K lower than the
Himawari-8 BT<inline-formula><mml:math id="M97" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (255.6–256.6 K) due to limb cooling caused by the
increased optical pathlength of the absorbing atmosphere at oblique view
angles. For the ash plume, however, the temperature contrast between the
satellites is the opposite: the GOES-17 minimum BT<inline-formula><mml:math id="M98" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (“dark pixel”,
231.2 K) is 5.4 K higher than the Himawari-8 minimum value (225.8 K). From
the oblique side view perspective of GOES-17, the plume fills a smaller
fraction of the relatively large infrared pixels than from the less oblique
Himawari-8 view point. The larger beam-filling (or subpixel ash cloud) error
over the plume leads to a more significant contamination of GOES-17 infrared
data by the warmer lower-level cloud layer.</p>
      <p id="d1e2254">The plume heights corresponding to the dark pixel temperatures between
19:10–19:50 UTC are shown in Fig. 5c. For both satellites the minimum
BT<inline-formula><mml:math id="M99" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> decreases by 3–4 K over this time period; however, the GOES-17
temperatures remain 5–6 K warmer than the Himawari-8 ones. The decrease in
BT<inline-formula><mml:math id="M100" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> is due likely to the combination of a slight increase in plume
height and a reduced beam-filling error as the plume expands, but the
individual contributions of these two effects cannot be determined.
Illustrating a common problem with the temperature method, the Himawari-8
minimum BT<inline-formula><mml:math id="M101" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> leads to multiple solutions because of the temperature
inversion at the tropopause in the ERA5 profile. At the eruption time the
dark pixel temperature matches the ERA5 data at 7.6, 11.0, and 14.0 km, while later on there are two matching heights varying between 8.0–10.5 km. The VolSatView algorithm retrieves a height of <inline-formula><mml:math id="M102" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.6 km at
19:10 UTC, close to the average of the two lowermost solutions. The
warm-biased GOES-17 dark pixel temperature results in a single but
low-biased height between 6.8–7.2 km. Overall, the lowermost
temperature-based heights derived from Himawari-8 data close to the eruption
time are consistent with the 19:10 UTC geometric retrievals. A height of
<inline-formula><mml:math id="M103" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km indicates a plume that did not penetrate the cold point
tropopause (<inline-formula><mml:math id="M104" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 8.7 km), which is in accordance with the
observed spreading of the umbrella cloud and the lack of overshooting tops.</p>
</sec>
<sec id="Ch1.S3.SS2">
  <label>3.2</label><title>Sheveluch, 10 April 2019</title>
      <p id="d1e2314">An explosive eruption of the volcano occurred on 10 April 2019 at 02:53 UTC
with continuous ash removal until 04:25 UTC. KVERT issued an orange-coded
VONA (2019-77, <uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-77</uri>, last access: 10 August 2021), reporting a
plume height of 7.5–8.0 km at 03:13 UTC based on video surveillance. The
GOES-17 and Himawari-8 visible imagery depicting the plume's evolution until
05:00 UTC are given in Supplement Animation 2 (SA 2). The corresponding
ground-based video footage at 1 min cadence obtained from the webcam
located at the Levinson-Lessing Kamchatkan Volcanological Station in Klyuchi
(yellow square in SA 2; 56.3167<inline-formula><mml:math id="M105" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> N,
160.8333<inline-formula><mml:math id="M106" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> E), <inline-formula><mml:math id="M107" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 45 km southwest of Sheveluch,
is given in Supplement Animation 3. As shown, the eruption produced<?pagebreak page12215?> a
weak bent plume without an umbrella cloud, which was quickly advected south
by strong northerly winds; the ERA5 wind speed increased from 6.1 m s<inline-formula><mml:math id="M108" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>
at the vent to a maximum of 19.5 m s<inline-formula><mml:math id="M109" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at an altitude of 8.7 km. Plume
height estimates obtained by the different geometric and temperature methods
at the eruption time are summarized in Table 1.</p>
      <p id="d1e2370">The GOES-17 fixed grid image at 03:00 UTC is plotted in Fig. 6a with
base-relative isoheights drawn. The height of the bent plume right above the
vent is <inline-formula><mml:math id="M110" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6 km. Because the plume expanded perpendicular to
the line of sight, the maximum plume height can be determined with little
error using plume top locations south of the vent. The plume top element
marked by the blue dot yields an altitude of <inline-formula><mml:math id="M111" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.2 km.
Identifying this plume top location in the equirectangular map (see SA 2)
leads to a projected column length of <inline-formula><mml:math id="M112" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 66.0 km, which results
in a height of <inline-formula><mml:math id="M113" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.1 km using method 1 with the GOES-17 VZA.</p>
      <p id="d1e2401">The Himawari-8 gridded and resampled image (CEReS V20190123) is shown in
Fig. 6b, with the volcano base and the same plume top element also marked.
In this case, a projected column length of <inline-formula><mml:math id="M114" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 16.3 km
corresponds to a height of <inline-formula><mml:math id="M115" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.9 km using method 1 with the
Himawari-8 VZA. Finally, the ellipsoid-projected parallax between the
GOES-17 and Himawari-8 plume top locations (blue dots) is <inline-formula><mml:math id="M116" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 70.0 km, which translates to a height of <inline-formula><mml:math id="M117" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.0 km using method
3 (shadow method in stereo mode).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><?xmltex \currentcnt{6}?><?xmltex \def\figurename{Figure}?><label>Figure 6</label><caption><p id="d1e2435"><bold>(a)</bold> GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M118" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula>
magnification), <bold>(b)</bold> Himawari-8 band 3 CEReS V20190123 gridded and
resampled image (0.005<inline-formula><mml:math id="M119" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> or <inline-formula><mml:math id="M120" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 0.5 km resolution, 3<inline-formula><mml:math id="M121" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula>
magnification), and <bold>(c)</bold> Klyuchi webcam image of the 10 April 2019
eruption of Sheveluch at 03:00 UTC. The red diamond/triangle marks the
volcano base, and the blue dots indicate the same plume top element in the
satellite images. In panel <bold>(a)</bold>, the baseline (solid black) and the
odd number isoheights (in km, dotted cyan) are also drawn. In panel <bold>(c)</bold>, the black triangle denotes the vent. Panel <bold>(d)</bold> shows
the ERA5 temperature profile above the vent (black line), the U.S. Standard
Atmosphere 1976 temperature profile (orange line), the GOES-17 and
Himawari-8 minimum BT<inline-formula><mml:math id="M122" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> at 03:00 UTC (red and blue vertical lines), and
the range of the minimum BT<inline-formula><mml:math id="M123" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 03:10–04:00 UTC (red and blue
shaded areas).</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f06.png"/>

        </fig>

      <p id="d1e2510">The Klyuchi webcam image of the plume at 03:00 UTC is shown in Fig. 6c. The
volcano and lower parts of the plume were obscured by clouds from this
vantage point. Webcam data are approximately calibrated by identifying in
cloud-free images the location of known features, such as degassing and
incandescence on the Young Sheveluch lava dome (<inline-formula><mml:math id="M124" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 2.5 km
elevation, black triangle) and the peak of Old Sheveluch (<inline-formula><mml:math id="M125" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 3.3 km elevation), as well as by theodolite measurements of further image
points. Note that the plume's movement or bending along the line of sight
introduces height biases similar to those of the side view technique. The
height reported in the VONA is based on expert analysis of video data from
two cameras and tries to account for the particulars of the eruption, such
as bending of the column. With this caveat in mind, expert analysis of the
video data yielded an estimate of <inline-formula><mml:math id="M126" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7 km for the plume top
element marked in Fig. 6c.</p>
      <p id="d1e2534">The plume heights derived from the dark pixel temperatures between
03:00–04:00 UTC are shown in Fig. 6d. The red and blue vertical lines near
245–246 K respectively indicate the GOES-17 and Himawari-8 minimum
BT<inline-formula><mml:math id="M127" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> at 03:00 UTC. Due to the small size of the plume at that time,
both brightness temperatures suffer from a large beam-filling error and are
thus biased warm, leading to a height estimate of <inline-formula><mml:math id="M128" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 4.5 km
that is significantly lower than the geometric height estimates. Ten minutes
later, the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M129" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> exhibits a large
decrease (by <inline-formula><mml:math id="M130" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9 and <inline-formula><mml:math id="M131" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15 K) thanks to a
considerable reduction in the beam-filling error over the rapidly expanding
plume. Between 03:10–04:00 UTC the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M132" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>
decreases from 236.4 to 231.0 K and from 231.2 to 226.6 K, respectively
(red and blue shading in Fig. 6d). As before, the GOES-17 dark pixel
temperatures are 4–5 K warmer than the Himawari-8 values, because of the
comparatively larger beam-filling error in the oblique side view. These
BT<inline-formula><mml:math id="M133" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> values correspond to plume heights between 6.2–6.9 km for GOES-17
and 6.9–7.5 km for Himawari-8.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7" specific-use="star"><?xmltex \currentcnt{7}?><?xmltex \def\figurename{Figure}?><label>Figure 7</label><caption><p id="d1e2597"><bold>(a)</bold> GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M134" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula>
magnification) and <bold>(b)</bold> Himawari-8 band 3 CEReS V20190123 image of
the 29 August 2019 eruption of Sheveluch at 03:10 UTC. The red
diamond/triangle marks the volcano base, and the solid yellow line is a
circle of 20 km radius fitted to the umbrella cloud. In panel <bold>(a)</bold>,
the baseline (solid black) and the odd number isoheights (in km, dotted
blue) are also drawn. Panel <bold>(c)</bold> shows the ERA5 temperature profile
(black line), the U.S. Standard Atmosphere 1976 temperature profile (orange
line), and the range of the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M135" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between
02:00–04:00 UTC (red and blue shaded areas, overlap in magenta).</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f07.png"/>

        </fig>

      <p id="d1e2633">Using the U.S. Standard Atmosphere 1976 profile (ITU-R, 2017) instead of ERA5, which
is an option in VolSatView, results in heights that are <inline-formula><mml:math id="M136" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 2 km
higher, highlighting the sensitivity of the temperature method to the
assumed atmospheric profile. At 03:00 UTC this leads to a better agreement
with the geometric estimates; later on, however, the derived heights are
considerable overestimates.</p>
      <p id="d1e2644">In sum, the temperature-based plume height is a severe underestimate at
eruption time, but it catches up with the geometric heights, especially for
Himawari-8, as the magnitude of the beam-filling error decreases with<?pagebreak page12216?> the
spreading of the plume. In general agreement with our results, Bril et al. (2019) also found temperature-based heights underestimating stereo heights
for small plume tops below the tropopause temperature inversion.</p>
</sec>
<sec id="Ch1.S3.SS3">
  <label>3.3</label><title>Sheveluch, 29–30 August 2019</title>
      <p id="d1e2655">On 29 August 2019 the volcano showed prolonged eruptive activity, which
eventually resulted in a strong plume with a large umbrella cloud. The
GOES-17 and Himawari-8 visible imagery between 01:00–07:00 UTC are given in
Supplement Animation 4 (SA 4). A high-level cloud layer at an altitude of
<inline-formula><mml:math id="M137" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8 km (7–9 km) obscured the satellite view of the volcano
and the lower part of the eruption column, while low-level clouds obscured
the view of the entire plume from the Klyuchi webcam. Nevertheless, the
satellite animation suggested explosions at least from 01:00 UTC. The rising
eruption column pierced the high cloud layer at 01:50 UTC and by 02:50 UTC
started to flatten and spread out to form an umbrella cloud of rapidly
increasing size. The ERA5 data indicated northwesterly winds at lower levels
and southeasterly winds at higher levels, with wind speed increasing from 5 m s<inline-formula><mml:math id="M138" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at the vent to a maximum of 11.5 m s<inline-formula><mml:math id="M139" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at an altitude of 9.5 km.</p>
      <p id="d1e2689">KVERT issued an orange-coded VONA (2019-125,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-125</uri>, last access: 10 August 2021), reporting a plume height
of 9.0–10.0 km at 03:10 UTC based on Himawari-8 brightness temperatures.
The corresponding GOES-17 fixed grid image (with base-relative isoheights)
and the Himawari-8 CEReS V20190123 image are shown in Fig. 7a and b. The
umbrella cloud can be fitted well with a circle of <inline-formula><mml:math id="M140" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 20 km
radius. Using the center of the circle as a representative plume top
location yields a height of <inline-formula><mml:math id="M141" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.8 km by the side view method.
An overshooting top at an altitude of 12.0–12.5 km is also apparent at this
time. Later images show overshooting tops and, thus, individual explosions
of diminishing magnitude occurring until 04:30 UTC (see SA 4). The umbrella
cloud keeps spreading at <inline-formula><mml:math id="M142" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 11 km altitude with the clearly
visible propagation of circular shock waves and becomes increasingly
elongated in the downwind northwesterly direction. By 04:30 UTC the still
circular upwind side of the anvil cloud expands to a radius of
<inline-formula><mml:math id="M143" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 50 km.</p>
      <p id="d1e2723">The variation of the minimum BT<inline-formula><mml:math id="M144" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 02:00–04:00 UTC and the ERA5
temperature profile at 03:00 UTC (which is representative of this time
period) are plotted in Fig. 7c. The beam-filling error (subpixel effect) is
negligible over the large umbrella cloud, and hence the GOES-17 brightness
temperatures (219.0–223.2 K) are 1–2 K lower than the Himawari-8 values
(220.0–223.8 K) due to limb cooling. The reanalysis profile shows a sharp
inversion at the tropopause cold point of 221.9 K near an altitude of 10.3 km. As a result, the warmer end of the measured BT<inline-formula><mml:math id="M145" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> range leads to
multiple height solutions: lower values between 9–11 km and higher values
in a wide range between 16–26 km. After 02:40 UTC, however, the measured
dark pixel temperatures indicate undercooling below the ERA5 cold point and
thus yield no height solution at all.</p>
      <p id="d1e2744">These dark pixel temperatures can technically be matched to an altitude if a
standard model atmosphere with a colder tropopause is used instead, although
such a model profile is a less accurate representation of the actual
temperature structure than ERA5. For example, considering the U.S. Standard
Atmosphere 1976 used in VolSatView, the GOES-17 and Himawari-8 dark pixel
temperatures at 03:10 UTC correspond to a plume height of <inline-formula><mml:math id="M146" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.6 and <inline-formula><mml:math id="M147" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.4 km, respectively, in apparently good
agreement with the side view estimate of <inline-formula><mml:math id="M148" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.8 km. Higher
estimates (<inline-formula><mml:math id="M149" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 12.4 km) would be obtained using the midlatitude
summer atmosphere, but the<?pagebreak page12217?> putatively more appropriate subarctic summer
atmosphere with a tropopause at 225 K would result in plume undercooling and
no height solution, similar to the ERA5 profile. Overall, this case
demonstrates again the sensitivity of the temperature method to the assumed
atmospheric profile.</p>
      <p id="d1e2776">Another weaker explosion occurred on 30 August 2019 at 08:00 UTC, for which
KVERT also issued an orange-coded VONA (2019-128,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-128</uri>, last access: 10 August 2021). This case is just before
sunset and thus provides a good demonstration of the side view method in a
low-light environment. The eruption produced a weak plume without an
umbrella cloud, which was bent and then advected south-southeast by strong
north-northwesterly winds; the ERA5 wind speed increased from 6 m s<inline-formula><mml:math id="M150" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>
at the vent to a maximum of 20 m s<inline-formula><mml:math id="M151" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at an altitude of 10.5 km. The
plume is generally similar to the 10 April 2019 case (see Sect. 3.2 and
Fig. 6). As before, height estimates obtained by the various methods are
summarized in Table 1.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F8"><?xmltex \currentcnt{8}?><?xmltex \def\figurename{Figure}?><label>Figure 8</label><caption><p id="d1e2808"><bold>(a)</bold> GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M152" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula>
magnification, contrast enhanced), <bold>(b)</bold> Himawari-8 band 3 CEReS
V20190123 image (contrast enhanced), and <bold>(c)</bold> Klyuchi webcam image
of the 30 August 2019 eruption of Sheveluch at 08:00 UTC. The red
diamond/triangle marks the volcano base, and the blue dots indicate the same
plume top element in the satellite images. In panel <bold>(a)</bold>, the
baseline (solid white) and the odd number isoheights (in km, dotted yellow)
are also drawn. In panel <bold>(c)</bold>, the white markings indicate height in
kilometers. Panel <bold>(d)</bold> shows the ERA5 temperature profile (black line), the
U.S. Standard Atmosphere 1976 temperature profile (orange line), and the
range of the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M153" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 08:00–09:00 UTC (red and blue shaded areas, overlap in magenta).</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f08.png"/>

        </fig>

      <p id="d1e2851"><?xmltex \hack{\newpage}?>The contrast-enhanced GOES-17 fixed grid image is plotted in Fig. 8a. The
plume is close to the day–night terminator, and GOES-17 views its shadowed
eastern side. Nevertheless, the shape of the ash column, bent perpendicular
to the line of sight, can be made out fairly well in the image. The plume
top element marked by the blue dot indicates an altitude of <inline-formula><mml:math id="M154" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.2 km. Identifying this plume top feature in an equirectangular map (not
shown) leads to a projected column length of <inline-formula><mml:math id="M155" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 67.8 km, which
results in a height of <inline-formula><mml:math id="M156" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.3 km using method 1 with the
GOES-17 VZA.</p>
      <p id="d1e2876">The contrast-enhanced Himawari-8 gridded image is shown in Fig. 8b, with the
volcano base and the same plume top element also marked. The lighting
conditions are more favorable here, because the satellite observes the
plume's western side illuminated by the setting sun. In this case, a
projected column length of <inline-formula><mml:math id="M157" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 16.7 km corresponds to a height
of <inline-formula><mml:math id="M158" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.0 km using method 1 with the Himawari-8 VZA. Finally,
the ellipsoid-projected parallax between the GOES-17 and Himawari-8 plume
top locations (blue dots) is <inline-formula><mml:math id="M159" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 68.7 km, which translates to a
height of <inline-formula><mml:math id="M160" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.8 km using method 3 (shadow method in stereo
mode).</p>
      <p id="d1e2907">The corresponding Klyuchi webcam image of the plume is shown with altitude
markings in Fig. 8c. Analysis of the video data, considering the bending of
the column and the partial obscuration of the plume top by meteorological
clouds, resulted in a height estimate of 7.0–7.5 km. In sum, the satellite
and ground-based geometric estimates are fairly consistent and indicate a
plume height near 7 km.</p>
      <p id="d1e2911">The dark pixel brightness temperatures between 08:00–09:00 UTC and the ERA5
temperature profile at 08:00 UTC are plotted in Fig. 8d. The beam-filling
error is generally substantial for this relatively small plume, but it has a
larger effect on Himawari-8 BT<inline-formula><mml:math id="M161" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> than GOES-17 BT<inline-formula><mml:math id="M162" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>, because the
plume appears narrower from the former's perspective due to the combination
of plume morphology and view geometry. As a result, the GOES-17 minimum
BT<inline-formula><mml:math id="M163" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (253.4–257.6 K) is 1–2 K colder than the Himawari-8 values
(254.8–259.5 K). These temperature ranges correspond to respective height
ranges of 5.0–5.6 km and 4.7–5.4 km with the ERA5 profile. For reference,
using the U.S. Standard Atmosphere profile would lead to 0.3 km lower heights.
These results again demonstrate that the temperature-based height is a
considerable underestimate for small and thin plumes. For an eruption with
sustained and larger ash release, such as the 10 April 2019 event, the
temperature method can catch up with the geometric estimates as the plume
spreads and optically thickens. This, however, is not the case for the
current short duration puff, whose plume quickly dispersed.</p>
</sec>
<sec id="Ch1.S3.SS4">
  <label>3.4</label><title>Karymsky, 14 August 2019</title>
      <p id="d1e2950">The volcano erupted on 14 August 2019, shortly before 04:30 UTC. The GOES-17
and Himawari-8 visible imagery between 04:00–06:00 UTC are plotted in
Supplement Animation 5 (SA 5). The vicinity of the volcano is covered<?pagebreak page12218?> by
a mid-level cloud layer at an altitude of 4.0–4.5 km, while further inland
Cu and Cb clouds are developing. In fact, at 05:40 UTC the GOES-17 fixed
grid image (top left corner) shows a textbook side view of a faraway
thundercloud with an overshooting top and anvil. At 04:30 UTC, the eruption
plume breaks through the mid-level clouds and quickly dissipates without
forming an umbrella. The ERA5 data indicate a wind speed of 5 m s<inline-formula><mml:math id="M164" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at
the vent and 8 m s<inline-formula><mml:math id="M165" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at an altitude of 10 km, with north-northeasterly
winds at lower levels and west-northwesterly winds at higher levels. The
plume splits in two, with the upper main part advecting east and the smaller
lower part advecting south.</p>
      <p id="d1e2977">KVERT issued an orange-coded VONA (2019-116,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-116</uri>, last access: 10 August 2021), reporting a plume height
of 4.0–4.5 km at 04:45 UTC based on visual data by nearby volcanologists.
The GOES-17 fixed grid image and the Himawari-8 image at 04:30 UTC are shown
in Fig. 9a and b. Two plume top peaks can be clearly identified in the
satellite images, marked by the light and dark blue dots. The side view
technique indicates both peaks at an altitude of <inline-formula><mml:math id="M166" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.1 km. For
the peak closer to the vent (light blue dot, minimal bending), the projected
length is <inline-formula><mml:math id="M167" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 66.0 and <inline-formula><mml:math id="M168" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 14.5 km in the GOES-17
and Himawari-8 mapped image, respectively, which yields a height of
<inline-formula><mml:math id="M169" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.8 and <inline-formula><mml:math id="M170" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.0 km using method 1. The
ellipsoid-projected parallaxes between the GOES-17 and Himawari-8 plume top
locations are <inline-formula><mml:math id="M171" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 68.7 km (light blue dots) and <inline-formula><mml:math id="M172" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 73.4 km (dark blue dots), which translate to height values of
<inline-formula><mml:math id="M173" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 6.9 and <inline-formula><mml:math id="M174" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7.3 km using stereo method 3.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F9"><?xmltex \currentcnt{9}?><?xmltex \def\figurename{Figure}?><label>Figure 9</label><caption><p id="d1e3049">The 14 August 2019 eruption of Karymsky: <bold>(a)</bold> GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M175" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification) at 04:30 UTC,
<bold>(b)</bold> Himawari-8 band 3 CEReS V20190123 image at 04:30 UTC, and
<bold>(c)</bold> quadcopter image at 04:45 UTC. The red diamond/triangle marks
the volcano base, while the light and dark blue dots indicate two
identifiable plume top elements in the satellite images. In panel <bold>(a)</bold>, the baseline (solid black) and the odd number isoheights (in
km, dotted blue) are also drawn. In panel <bold>(c)</bold>, the white markings
indicate height in kilometers. Panel <bold>(d)</bold> shows the ERA5 temperature profile
(black line), the U.S. Standard Atmosphere 1976 temperature profile (orange
line), and the range of the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M176" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between
04:30–05:30 UTC (red and blue shaded areas).</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f09.png"/>

        </fig>

      <p id="d1e3094">The photo of the lower part of the plume obtained by a quadcopter at 04:45 UTC is shown in Fig. 9c. Obviously, the quadcopter image only captures the
plume below the cloud layer and hence provides a height underestimate.
Considering that the summit of the volcano is at an elevation of
<inline-formula><mml:math id="M177" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 1.5 km, a rough visual estimate from the photo results in a
plume height of 4.0–4.5 km, as reported in the VONA.</p>
      <p id="d1e3104">The variation of the minimum BT<inline-formula><mml:math id="M178" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 04:00–06:00 UTC and the ERA5
temperature profile at 05:00 UTC are plotted in Fig. 9d. Because the plume
is small, the brightness temperature is likely affected by substantial
beam-filling error for both satellites. However, while Himawari-8 observes
the plume against the warmer background of the mid-level cloud layer
surrounding the volcano, GOES-17 observes the plume partially against the
background of the convective clouds developing further inland in the west.
Combined with limb cooling, this leads to the GOES-17 dark pixel BT<inline-formula><mml:math id="M179" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula>
(253.3–256.5 K) being 2–3 K colder than the Himawari-8 value (256.8–259.1 K). These temperature ranges correspond to respective height ranges of 5.7–6.2 and 5.3–5.7 km using the ERA5 profile; the heights are
<inline-formula><mml:math id="M180" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 0.8 km lower when using the U.S. Standard Atmosphere profile in
VolSatView. In sum, the geometric methods consistently indicate a plume
height of <inline-formula><mml:math id="M181" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7 km, while the temperature-based heights are
biased low by at least 1 km, in line with our previous findings for small
and thin plumes.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F10" specific-use="star"><?xmltex \currentcnt{10}?><?xmltex \def\figurename{Figure}?><label>Figure 10</label><caption><p id="d1e3141">The 21 October 2020 eruption of Bezymianny: GOES-17 band
2 fixed grid image (8<inline-formula><mml:math id="M182" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification) at <bold>(a)</bold> 20:30 UTC,
<bold>(d)</bold> 20:40 UTC, and <bold>(f)</bold> 20:50 UTC; the corresponding
Himawari-8 band 3 CEReS V20190123 image at <bold>(b)</bold> 20:30 UTC,
<bold>(e)</bold> 20:40 UTC, and <bold>(g)</bold> 20:50 UTC; and <bold>(c)</bold> the
webcam image from the Kirishev seismic station at 20:29 UTC. The yellow
diamond/triangle marks the volcano base, while the yellow and blue asterisks
indicate the plume top in the satellite images. In panels <bold>(a)</bold>, <bold>(d)</bold>, and <bold>(f)</bold>, the baseline (solid white) and the odd number isoheights
(in km, dotted cyan) are also drawn. Panel <bold>(h)</bold> shows the ERA5
temperature profile (black line), the U.S. Standard Atmosphere 1976
temperature profile (orange line), the GOES-17 and Himawari-8 minimum
BT<inline-formula><mml:math id="M183" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> at 20:30 UTC (red and blue vertical lines), and the range of the
minimum BT<inline-formula><mml:math id="M184" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 20:40–22:30 UTC (red and blue shaded areas).</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f10.png"/>

        </fig>

</sec>
<sec id="Ch1.S3.SS5">
  <label>3.5</label><title>Bezymianny, 21 October 2020</title>
      <p id="d1e3218">A detailed description of this case is provided by Girina et al. (2020);
here we focus only on the salient early features of the eruption. KVERT
issued red-coded VONAs (2020-190,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2020-190</uri>, last access: 10 August 2021, and 2020-191,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2020-191</uri>, last access: 10 August 2021), reporting a plume height
of 8.0–9.0 km based on video data and Himawari-8 brightness temperatures.
According to video surveillance from the Kirishev seismic station, located
16 km west-southwest of Bezymianny and operated by the Kamchatka Branch of
the Geophysical Survey of the Russian Academy of Sciences, the explosive
eruption of the volcano started at 20:22 UTC, just around sunrise. The
ground-based video of the first 30 min of the eruption is available at
<uri>https://www.youtube.com/watch?v=LFOSJtGRON8</uri> (last<?pagebreak page12219?> access: 10 August 2021), while the GOES-17 and
Himawari-8 visible images between 20:00–23:00 UTC are given in
Supplement Animation 6. Note that the GOES-17 view (azimuth of
112<inline-formula><mml:math id="M185" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>) and the Himawari-8 view (azimuth of
<inline-formula><mml:math id="M186" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>156<inline-formula><mml:math id="M187" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>) are almost exactly perpendicular to each other,
resulting in a rather different appearance of the early minimally expanded
eruption column. At 20:50 UTC the overshooting top of the ash column, which
penetrated the stratosphere, is very prominent in the GOES-17 side view but
difficult to discern in the Himawari-8 image. The plume eventually split
into three parts: the lowest part expanded towards north-northwest, a higher
lobe advected south-southeast, and the highest part that directly originates
from the overshooting top drifted east due to relatively modest winds of
5–11 m s<inline-formula><mml:math id="M188" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.</p>
      <p id="d1e3268">The GOES-17 fixed grid image and the Himawari-8 image at 20:30 UTC are shown
in Fig. 10a and b, while the Kirishev webcam image at 20:29 UTC is
plotted in Fig. 10c (by 20:30 UTC the plume top is out of frame). The plume
top location is indicated by the yellow and blue asterisks in the satellite
images. The side view technique yields a peak height of <inline-formula><mml:math id="M189" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.3 km. The projected length of the eruption column is <inline-formula><mml:math id="M190" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 89.6
and <inline-formula><mml:math id="M191" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 19.8 km in the GOES-17 and Himawari-8 mapped image,
respectively, which converts to a height of <inline-formula><mml:math id="M192" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.4 and
<inline-formula><mml:math id="M193" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.7 km using method 1. The ellipsoid-projected parallax
between the GOES-17 and Himawari-8 plume top locations is <inline-formula><mml:math id="M194" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 90.1 km, which translates to a height of <inline-formula><mml:math id="M195" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.1 km using
stereo method 3. The plume height estimated from the webcam image,
considering the elevation of the nearby Klyuchevskoy (<inline-formula><mml:math id="M196" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 4.8 km) and Kamen (<inline-formula><mml:math id="M197" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 4.6 km) volcanoes, is <inline-formula><mml:math id="M198" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9 km.</p>
      <p id="d1e3342">By 20:40 UTC (Fig. 10d and e), the column rises further and starts to
develop an umbrella, spreading out mostly in the SW–NE direction. The side
view method indicates a peak height of <inline-formula><mml:math id="M199" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 13.2 km. The
projected lengths (<inline-formula><mml:math id="M200" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 133.5 and <inline-formula><mml:math id="M201" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 28.4 km)
yield height estimates of <inline-formula><mml:math id="M202" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 13.5 and <inline-formula><mml:math id="M203" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 12.4 km for GOES-17 and Himawari-8, respectively, while the parallax
(<inline-formula><mml:math id="M204" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 134 km) results in a top height of <inline-formula><mml:math id="M205" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 13.1 km.</p>
      <p id="d1e3395">At 20:50 UTC (Fig. 10f and g), the overshooting top of the eruption
column reaches its maximum altitude of <inline-formula><mml:math id="M206" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15.3 km according to
the side view technique. The height estimates based on the projected lengths
(<inline-formula><mml:math id="M207" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 158.5 and <inline-formula><mml:math id="M208" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 35.7 km) are 15.7 and 15.5 km for GOES-17 and Himawari-8, respectively, and the parallax
(<inline-formula><mml:math id="M209" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 159.5 km) corresponds to a height of <inline-formula><mml:math id="M210" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15.2 km.</p>
      <p id="d1e3434">The variation of the dark pixel BT<inline-formula><mml:math id="M211" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 20:30–22:30 UTC and the
ERA5 temperature profile at 21:00 UTC are plotted in Fig. 10h. The GOES-17
brightness temperatures are 2–3 K warmer than the Himawari-8 ones, due
likely to the differing interplay between plume morphology, view geometry,
and the background against which the plume is observed. The red (238.5 K)
and blue (235.3 K) vertical lines respectively indicate the GOES-17 and
Himawari-8 minimum BT<inline-formula><mml:math id="M212" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> at 20:30 UTC. Because of the initially small
size of the plume, these temperature values are biased warm, leading to
low-biased height estimates of 6.4 and 6.8 km with the ERA5 profile, or
7.7 and 8.1 km with the U.S. Standard Atmosphere profile used by VolSatView.<?pagebreak page12220?> Ten
minutes later, as the plume rapidly expands and the beam-filling error
decreases, the BT<inline-formula><mml:math id="M213" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> drops by <inline-formula><mml:math id="M214" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15 K and remains at values
that correspond to dual height solutions fluctuating within a wide range.
The ERA5 temperature profile is characterized by a cold point tropopause
(216.6 K) at 10.1 km and a thick nearly isothermal (220–221 K) layer
between 11.0–20.0 km. As a result, the dark pixel BT<inline-formula><mml:math id="M215" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> after 20:30 UTC
yields below-tropopause heights between 8.5–9.3 km and above-tropopause
heights between 11.0–20.0 km. VolSatView avoids the issue of multiple
solutions, at the expense of using a less accurate standard temperature
profile, and retrieves a plume height near <inline-formula><mml:math id="M216" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.7 km.</p>
      <p id="d1e3488">Overall, this case highlights again the good agreement between the geometric
methods but also the potential problems affecting the temperature method:
low-biased heights for small and thin plumes as well as retrieval
difficulties associated with the tropopause temperature inversion and small
lapse rates (multiple solutions, excessive uncertainty).</p>
</sec>
<sec id="Ch1.S3.SS6">
  <label>3.6</label><title>Ulawun, 26 June 2019</title>
      <p id="d1e3499">The volcano experienced a major subplinian eruption on 26 June 2019, which
triggered an aviation warning with a red color code. Supplement Animation
7 shows the GOES-17 and Himawari-8 visible images depicting the explosive
activity between 04:00–07:50 UTC. Ulawun is observed by GOES-17 from almost
exactly east (view azimuth of <inline-formula><mml:math id="M217" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 88<inline-formula><mml:math id="M218" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>) at a
view zenith angle of <inline-formula><mml:math id="M219" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 80<inline-formula><mml:math id="M220" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> (Fig. 1).
Himawari-8, on the other hand, observes the volcano from the northwest (view
azimuth of about <inline-formula><mml:math id="M221" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>64<inline-formula><mml:math id="M222" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>) at a small view zenith angle of
<inline-formula><mml:math id="M223" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 14<inline-formula><mml:math id="M224" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>. Thanks to the nearly overhead view,
the height parallax is small in the Himawari-8 images. Also note that the
equatorial location (5.05<inline-formula><mml:math id="M225" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> S, 151.33<inline-formula><mml:math id="M226" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> E)
results in negligible distortion in the mapped view and solar azimuth
directions.</p>
      <p id="d1e3585">Explosions of varying strength and the peculiarities of the wind profile
produced a multilayer plume, the highest part of which penetrated the
stratosphere. The first major pulse at 04:40 UTC attained an altitude of
14–15 km according to the side view method, with its plume spreading
south-southeast by north-northwesterly winds, which were present between
10–15 km and showed a local maximum (<inline-formula><mml:math id="M227" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 13.5 m s<inline-formula><mml:math id="M228" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) at 14 km altitude in the ERA5 profile. Note that this eruption column can be
clearly seen in the GOES-17 oblique view already at 04:40 UTC when its top
has a radius of merely 5 km, but the plume is difficult to distinguish from
the surrounding meteorological clouds in the Himawari-8 overhead view, where
the plume only becomes apparent in subsequent images as its umbrella grows.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F11" specific-use="star"><?xmltex \currentcnt{11}?><?xmltex \def\figurename{Figure}?><label>Figure 11</label><caption><p id="d1e3609">The 26 June 2019 eruption of Ulawun: GOES-17 band 2
fixed grid image (4<inline-formula><mml:math id="M229" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification) at <bold>(a)</bold> 06:10 UTC and
<bold>(c)</bold> 07:00 UTC and the corresponding Himawari-8 band 3 CEReS
V20190123 image at <bold>(b)</bold> 06:10 UTC and <bold>(d)</bold> 07:00 UTC. The
yellow diamond (GOES-17) and white plus sign (Himawari-8) mark the volcano
base, while the solid/dashed yellow line is a circle fitted to the umbrella
cloud with a radius of 28 km at 06:10 UTC and 63 km at 07:00 UTC (the yellow
plus sign is the circle center). The yellow asterisk indicates the
overshooting top in the 06:10 UTC images. In panel <bold>(d)</bold>, the white
arrow depicts the length and direction of the shadow the upper umbrella
cloud casts on the lower umbrella cloud. In panels <bold>(a)</bold> and <bold>(c)</bold>, the baseline (solid white) and selected isoheights (in km, dotted
white/blue) are also drawn.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f11.png"/>

        </fig>

      <p id="d1e3648">Another series of pulses started at 05:20 UTC, which produced overshooting
tops between 16–18 km. The umbrella formed by these puffs is darker than
that of the 04:40 UTC puff, but it also expanded mostly to the south and at
the same 14–15 km level. The strongest pulse began at 06:00 UTC, and its
overshooting top reached its maximum altitude at 06:10 UTC; the
corresponding GOES-17 and Himawari-8 images are plotted in Fig. 11a and b, respectively.</p>
      <p id="d1e3651">The umbrella cloud of the pulses starting at 05:20 UTC can be fitted with a
circle of <inline-formula><mml:math id="M230" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 28 km radius at 06:10 UTC. The center of this
fitted circle (yellow plus sign), located slightly southeast of the volcano,
is at a height of 14.7 km, while the highest point of the overshooting top
(yellow asterisk) is at an altitude of <inline-formula><mml:math id="M231" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 22.3 km, according to
the side view technique. The projected length of the overshooting peak is
<inline-formula><mml:math id="M232" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 147.1 km in the GOES-17 mapped image, which yields a height
of <inline-formula><mml:math id="M233" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 21.5 km using method 1. The parallax between the GOES-17
and Himawari-8 overshooting top locations is <inline-formula><mml:math id="M234" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 149.7 km, which
translates to a height of <inline-formula><mml:math id="M235" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 21.3 km using method 3 in stereo
mode.</p>
      <p id="d1e3697">The bulk of the 06:10 UTC puff spreads out in a highly isotropic manner,
forming a rapidly growing and almost perfectly circular umbrella cloud above
the previous southwardly elongated ash layer. Note the outwardly propagating
concentric gravity waves in the animation. As plotted in Fig. 11c and d,
the radius of the upper-level umbrella increases to <inline-formula><mml:math id="M236" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 63 km by
07:00 UTC (the radius eventually reaches <inline-formula><mml:math id="M237" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 95 km by sunset at
07:50 UTC). The center of the fitted circle, which is horizontally very
close to the volcano indicating little advection, corresponds to an altitude
of <inline-formula><mml:math id="M238" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 18.3 km by the side view method. The shadow this
upper-level umbrella casts on the lower-level ash cloud is <inline-formula><mml:math id="M239" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 18.8 km long in the azimuth direction of <inline-formula><mml:math id="M240" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 115<inline-formula><mml:math id="M241" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> (Fig. 11d), which results in a <inline-formula><mml:math id="M242" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 3.2 km
height differential between the layers using method 3. This shadow-based
height difference estimate is consistent, within error bars, with the
side view plume height estimates (<inline-formula><mml:math id="M243" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 14.7 and
<inline-formula><mml:math id="M244" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 18.3 km). The isotropic expansion of the upper umbrella
cloud at <inline-formula><mml:math id="M245" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 18 km altitude is aided by a local wind speed
minimum (<inline-formula><mml:math id="M246" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 6.5 m s<inline-formula><mml:math id="M247" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) at 17 km altitude in the ERA5 data.
Finally, there is an even higher plume element that directly originates from
the overshooting top. The eastward movement of this smaller ash mass and its
estimated height (<inline-formula><mml:math id="M248" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 22.3 km) are again consistent with the
ERA5 wind profile, which shows strong westerlies in the 19–24 km altitude
range with a maximum speed of <inline-formula><mml:math id="M249" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 19.5 m s<inline-formula><mml:math id="M250" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.</p>
      <p id="d1e3819">The variation of the minimum BT<inline-formula><mml:math id="M251" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 05:50–07:50 UTC and the
representative ERA5 temperature profile at 07:00 UTC are plotted in Fig. 12.
The tropical standard atmosphere profile (ITU-R, 2017) is also shown, which
is close to the reanalysis data up to an altitude of 19 km and thus leads to
similar derived heights. The GOES-17 dark pixel temperatures (191.9–197.0 K) are 4–5 K warmer than the Himawari-8 values (187.7–193.8 K), despite
limb cooling. A potential reason for this temperature contrast is that the
longest optical path in the nearly overhead Himawari-8 view samples almost
the entire vertical extent of the tall eruption column, while the oblique
GOES-17 side view only samples the shorter horizontal cross section of the
narrow column. Furthermore, the thickest plume core is observed against the
background of the high and cold ash umbrella in the near-nadir Himawari-8
image, but it is observed partially against the background<?pagebreak page12221?> of lower and
warmer meteorological clouds in the GOES-17 side view.</p>
      <p id="d1e3831">The Himawari-8 BT<inline-formula><mml:math id="M252" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> typically has no corresponding height solution, as
it indicates undercooling below the 192.8 K cold point of the ERA5
tropopause located at 16.7 km. The warmest Himawari-8 temperatures and most
of the GOES-17 temperatures, on the other hand, result in two height
solutions, one below and one above the tropopause, ranging between
15.8–18.1 km. The higher solution agrees well with the geometric height
estimate of the upper umbrella cloud. The prominent overshooting top,
however, is not captured by the basic temperature retrievals.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F12"><?xmltex \currentcnt{12}?><?xmltex \def\figurename{Figure}?><label>Figure 12</label><caption><p id="d1e3846">The ERA5 temperature profile (black line), a tropical
standard atmosphere temperature profile (green line), and the range of the
GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M253" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> between 05:50–07:50 UTC (red and
blue shaded areas, overlap in magenta) for the 26 June 2019 eruption of
Ulawun.</p></caption>
          <?xmltex \igopts{width=156.490157pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f12.png"/>

        </fig>

      <p id="d1e3864">Here we note that the more sophisticated multichannel VOLcanic Cloud
Analysis Toolkit (VOLCAT; Pavolonis et al., 2013) retrieves height values
for the Ulawun plume in the 16–20 km range with a maximum height of 22 km
(Bachmeier, 2019). The heights for the upper umbrella cloud are generally
consistent with our estimate. The maximum VOLCAT height is obtained around
07:00 UTC for the eastward-moving ash mass originating from the 06:10 UTC
overshooting top and agrees well with the side view height estimate
(<inline-formula><mml:math id="M254" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 22.3 km) calculated for the overshooting top itself. At
06:10 UTC the overshooting top directly above the volcano is subpixel in
the IR channels, and its height is significantly underestimated by VOLCAT. By
07:00 UTC, however, part of the overshooting mass drifts eastward and
expands, thereby reducing beam-filling biases in the brightness temperatures
and the derived heights.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F13" specific-use="star"><?xmltex \currentcnt{13}?><?xmltex \def\figurename{Figure}?><label>Figure 13</label><caption><p id="d1e3876">The 21–22 June 2019 eruption of Raikoke: GOES-17 band 2
fixed grid image (8<inline-formula><mml:math id="M255" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification) at <bold>(a)</bold> 19:40 UTC on 21 June,
<bold>(c)</bold> 22:00 UTC on 21 June, <bold>(e)</bold> 03:50 UTC on 22 June, and
<bold>(g)</bold> 05:30 UTC on 22 June and the corresponding Himawari-8 band 3
CEReS V20190123 images in panels <bold>(b)</bold>, <bold>(d)</bold>, <bold>(f)</bold>,
and <bold>(h)</bold>. The red diamond/triangle marks the volcano base, while the
yellow asterisks indicate the same plume top feature in the satellite
images. In panels <bold>(e)</bold> and <bold>(f)</bold>, the yellow and blue
asterisks denote the overshooting top and a point on the umbrella cloud,
respectively. In panel <bold>(b)</bold>, the green dot is the start point of the
shadow, the cyan dot is the shadow terminus on the marine stratocumulus (Sc) layer, and the
double-headed arrows indicate the ellipsoid-projected distance and direction
between the points matching the color of the arrowheads. The baseline (solid
green) and the odd number isoheights (in km, dotted white) are also drawn in
the GOES-17 images. Panels <bold>(i)</bold> and <bold>(j)</bold> show the ERA5
temperature profile (black line) at 21:00 UTC on 21 June and 05:00 UTC on 22 June, the U.S. Standard Atmosphere 1976 temperature profile (orange line),
and the GOES-17 and Himawari-8 minimum BT<inline-formula><mml:math id="M256" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (red and blue vertical
lines) corresponding to the satellite images.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f13.png"/>

        </fig>

</sec>
<sec id="Ch1.S3.SS7">
  <label>3.7</label><title>Raikoke, 21–22 June 2019</title>
      <p id="d1e3950">A series of nine major explosions that produced a very large and dense ash
plume occurred on 21–22 June 2019, with<?pagebreak page12222?> minor emissions continuing for a few
more days. KVERT issued three red-coded VONAs (2019-100,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-100</uri>, last access: 10 August 2021; 2019-101,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-101</uri>, last access: 10 August 2021; and 2019-102,
<uri>http://www.kscnet.ru/ivs/kvert/van/?n=2019-102</uri>, last access: 10 August 2021), reporting a plume height
of 10.0–13.0 km based on Himawari-8 brightness temperatures. Some 40
aircraft were consequently diverted away from the plume (Crafford and
Venzke, 2019). The GOES-17 and Himawari-8 visible images capturing the
explosions between 17:50 UTC on 21 June and 08:50 UTC on 22 June are given
in Supplement Animation 8. The low levels were characterized by an
anti-cyclonic circulation centered on Ekarma island a bit northeast, leading
to weak southeasterly winds in the boundary layer near Raikoke. The
high-level flow, however, was westerly and quite strong, with maximum wind
speeds of 25–30 m s<inline-formula><mml:math id="M257" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at 11 km altitude, which resulted in the rapid
eastward drift of the ash cloud.</p>
      <p id="d1e3974">Plume height estimates for all major explosive events are summarized in
Supplement Figs. S1 and S2 and Supplement Table S1; here in Fig. 13 we
only show four typical snapshots (two for each day). At 19:40 UTC on 21 June, the narrow eruption column is minimally bent and has a sharp tip
(Fig. 13a and b). The plume height estimate from the GOES-17 side view is
<inline-formula><mml:math id="M258" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.9 km. The respective GOES-17 and Himawari-8 map-projected
lengths (method 1) yield heights of <inline-formula><mml:math id="M259" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.7 and
<inline-formula><mml:math id="M260" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10.0 km, using the corresponding view zenith angles
(<inline-formula><mml:math id="M261" display="inline"><mml:mo lspace="0mm">∼</mml:mo></mml:math></inline-formula> 86<inline-formula><mml:math id="M262" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> and <inline-formula><mml:math id="M263" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 57<inline-formula><mml:math id="M264" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>). The
parallax between the plume top positions in the satellite images (yellow
asterisks) results in a height of <inline-formula><mml:math id="M265" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10 km (method 3 in
stereo mode). The Himawari-8 view also captures the plume's shadow, the
end of which is cast on the surrounding marine stratocumulus (Sc) deck. This allows
employing the stick shadow and edge shadow methods as well, which indicate
above-cloud heights of <inline-formula><mml:math id="M266" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 8.9 and <inline-formula><mml:math id="M267" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.1 km.
Considering that ERA5 shows a low-level temperature inversion between
365–795 m and that parts of neighboring Rasshua (peak elevation 956 m) and
Shiashkotan (peak elevation 944 m) islands are still visible, a cloud top
height of <inline-formula><mml:math id="M268" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 700 m seems reasonable for the marine Sc. Added to
the above-cloud heights, this leads to above-ellipsoid heights of
<inline-formula><mml:math id="M269" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.6 and <inline-formula><mml:math id="M270" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.8 km from the<?pagebreak page12223?> shadow methods.
The GOES-17 and Himawari-8 dark pixel BT<inline-formula><mml:math id="M271" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> values (254.0 and 251.1 K), on
the other hand, have a warm bias over the narrow plume and correspond to
significantly lower heights of only 6.1 and 6.5 km (Fig. 13i). The
VolSatView height of 8.8 km is in better agreement with the geometric
estimates, but it is still an underestimate.</p>
      <p id="d1e4083">The eruption column at 22:00 UTC on 21 June is still near-vertical but more
massive, sporting a flat and circular umbrella cloud of <inline-formula><mml:math id="M272" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 7 km
radius (Fig. 13c and d). The umbrella is not yet distorted or advected by
the wind, and thus its center is at the island. The side view method
retrieves a height of <inline-formula><mml:math id="M273" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 11.3 km for the centerline of the
umbrella cloud, which is in good agreement with the <inline-formula><mml:math id="M274" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 11.6 km
stereo height obtained from the GOES-17 and Himawari-8 image locations of
the plume center (yellow asterisks). These estimates are near the 11.2 km
altitude of the ERA5 cold point tropopause (Fig. 13i). The Himawari-8 dark
pixel BT<inline-formula><mml:math id="M275" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (222.5 K) is close to the temperature of the
quasi-isothermal atmospheric layer spanning between 10–25 km. As a result,
the temperature method ambiguously yields four matching heights at 10.7,
12.2, 13.7, and 23.7 km, although the average of the two lowermost
solutions, perhaps fortuitously, agrees well with the geometric height
estimates. The warm-biased GOES-17 dark pixel temperature (228.3 K),
however, corresponds to a low-biased height of <inline-formula><mml:math id="M276" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 9.4 km. The
VolSatView height of 10.0 km is also biased low by more than a kilometer.</p>
      <p id="d1e4123">At 03:50 UTC on 22 June, the plume consists of an overshooting column and a
larger umbrella cloud of <inline-formula><mml:math id="M277" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 13 km radius (Fig. 13e and f).
Because the overshooting top is located approximately above the volcano, the
side view method can be used with more confidence here. The side view
estimate of <inline-formula><mml:math id="M278" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15.6 km is consistent with the stereo height of
<inline-formula><mml:math id="M279" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15.8 km obtained for the midpoint of the overshooting top
(yellow asterisks). The umbrella cloud, however, has clearly been advected
east (towards GOES-17) by the strong upper level winds. Therefore, taking
the plume center as the characteristic point in the side view calculations
would underestimate the height. The windward western edge of the umbrella is
a better choice as it is closer to the local vertical at the volcano.
Allowing for the ambiguity in delineating the western plume edge in the
GOES-17 image, we estimate an umbrella height between 13.0–14.0 km. This
height range is consistent with the stereo height of <inline-formula><mml:math id="M280" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 13.7 km
derived for a specific umbrella cloud feature that is visually identifiable
in both satellite images (blue asterisks). The Himawari-8 and GOES-17
minimum brightness temperatures are very similar for this thick expanded
plume (222.6 and 222.3 K) and again lead to four possible height solutions
(Fig. 13j); the VolSatView height (10.1 km) is near the lowest of these.
None of them is a good match for the height of the overshooting top, but the
second highest solution around <inline-formula><mml:math id="M281" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 14 km agrees well with the
geometric height estimates of the umbrella cloud.</p>
      <p id="d1e4162">The last major eruptive puff at 05:30 UTC on 22 June produced a wide and
near-vertical overshooting column (Fig. 13g and h). The side view height
estimate of <inline-formula><mml:math id="M282" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 14.5 km is in good agreement with the stereo
height of <inline-formula><mml:math id="M283" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 14.6 km calculated for the midpoint of the plume
top (yellow asterisks). As before, the Himawari-8 dark pixel temperature
(222.5 K) corresponds to four matching heights, the closest of which (13.4 km) underestimates the geometric heights by more than 1 km (Fig. 13j). The
VolSatView result and the estimate based on the warm-biased GOES-17 minimum
BT<inline-formula><mml:math id="M284" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (227.0 K) lead to even more underestimated heights of 10.2 and
9.7 km, respectively.</p>
      <p id="d1e4188">In a final example, we analyze the plume at the overpass time of the Terra satellite carrying the Moderate Resolution Imaging Spectroradiometer
(MODIS). As described in Sect. 3.4 of Part 1, the “3D Winds” algorithm
performs stereo wind and height retrievals by combining near-simultaneous
imagery from MODIS on one hand with that from GOES-17 or Himawari-8 on the
other (Carr et al., 2019) – we note that a similar stereo method has
previously been developed for Meteosat imagery by Zakšek et al. (2013)
and Dehnavi et al. (2020). The GOES-17 near-limb imagery is unsuitable for
automated image matching, although it can occasionally be used for stereo matching
by a human observer as demonstrated in our study, but Himawari-8 imagery,
characterized by less extreme view zenith angles over Raikoke, can be
successfully combined with MODIS imagery.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F14" specific-use="star"><?xmltex \currentcnt{14}?><?xmltex \def\figurename{Figure}?><label>Figure 14</label><caption><p id="d1e4193">The Raikoke plume on 22 June 2019 at 01:20 UTC:
<bold>(a)</bold> GOES-17 band 2 fixed grid image (8<inline-formula><mml:math id="M285" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> magnification),
<bold>(b)</bold> Himawari-8 band 3 CEReS V20190123 image, and <bold>(c)</bold> MODIS
Terra–Himawari-8 3D Winds stereo heights. The red diamond/triangle and the
letter “R” mark the volcano base, while the yellow asterisks indicate the
same overshooting top feature in the satellite images. The baseline (solid
green) and the odd number isoheights (in km, dotted white) are also drawn in
panel <bold>(a)</bold>. Panel <bold>(d)</bold> shows the ERA5 temperature profile
(black line) at 01:00 UTC on 22 June, the U.S. Standard Atmosphere 1976
temperature profile (orange line), and the GOES-17 and Himawari-8 minimum
BT<inline-formula><mml:math id="M286" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">11</mml:mn></mml:msub></mml:math></inline-formula> (red and blue vertical lines) corresponding to the satellite
images.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/21/12207/2021/acp-21-12207-2021-f14.png"/>

        </fig>

      <p id="d1e4234">The GOES-17 and Himawari-8 views of the plume in the vicinity of the volcano
at 01:20 UTC on 22 June are shown in Fig. 14a and b. The overall plume
stretches hundreds of kilometers to the east at that time, because it has
been formed by a train of quasi-continuous explosions starting at 22:40 UTC
on 21 June and ending at 01:50 UTC on 22 June. The plume has a complex
topography with large height variations, and the side view method can only
determine the height of the overshooting top above the vent, which appears
to reach an altitude of <inline-formula><mml:math id="M287" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 16.5 km. In good agreement with this
estimate, the simplified shadow-stereo technique (method 3 in stereo mode)
yields a height of <inline-formula><mml:math id="M288" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 16.1 km for the northern edge of the
overshooting top (yellow asterisks).</p>
      <p id="d1e4251">The 3D Winds stereo plume heights derived from Himawari-8 band 3 and
Terra MODIS band 1 (0.64 <inline-formula><mml:math id="M289" display="inline"><mml:mrow class="unit"><mml:mi mathvariant="normal">µ</mml:mi></mml:mrow></mml:math></inline-formula>m, 250 m nominal resolution) images are plotted in
Fig. 14c. The Himawari-8 fixed grid image was first remapped to the MODIS
granule after navigation adjustments per Yamamoto et al. (2020), and then
retrievals were performed using <inline-formula><mml:math id="M290" display="inline"><mml:mrow><mml:mn mathvariant="normal">48</mml:mn><mml:mo>×</mml:mo><mml:mn mathvariant="normal">48</mml:mn></mml:mrow></mml:math></inline-formula> MODIS pixel (<inline-formula><mml:math id="M291" display="inline"><mml:mrow><mml:mn mathvariant="normal">12</mml:mn><mml:mo>×</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula> km<inline-formula><mml:math id="M292" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula>) image templates. As indicated by the white areas (missing data),
stereo matching sometimes failed due to lack of texture or the different
view azimuths (northwesterly for MODIS and southwesterly for Himawari-8).
The former mostly affects the flatter and fuzzier downstream parts of the
plume, while the latter can hamper retrievals over the more dynamic
near-vent areas where the satellites might view different sides of the
vertically protruding overshooting column.</p>
      <p id="d1e4296">The automated stereo algorithm shows a maximum plume height of
<inline-formula><mml:math id="M293" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 15.5 km in the vicinity of the volcano, which is reasonable
given that the highest part of the overshooting top<?pagebreak page12224?> is not captured due to
reasons discussed above. The retrievals also reveal a substantial spatial
gradient whereby the plume height decreases from 14–15 km in the northwest
to 7–8 km in the southeast. Such height variation is qualitatively
consistent with the clearly layered appearance of the plume in the satellite
images. Supplement Fig. S3 plots the 3D Winds heights derived for the
Aqua MODIS overpass at 03:10 UTC on 22 June, by which time the plume expanded meridionally and drifted further to the east. The mean plume height also
increased as evidenced by a larger area fraction above 12 km, but the
overall height range (7–15 km) and the south–north height gradient remained
the same.</p>
      <p id="d1e4306">The corresponding ERA5 temperature profile and minimum brightness
temperatures are plotted in Fig. 14d. The Himawari-8 dark pixel temperature
(216.2 K) indicates a <inline-formula><mml:math id="M294" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 5 K undercooling even relative to the
standard atmosphere and yields no height estimate, while VolSatView returns
an estimate of 11.1 km for the umbrella. The warmer GOES-17 value (221.3 K),
on the other hand, corresponds to three ambiguous solutions (11.3, 14.7, and 22.5 km). These results demonstrate again the typical limitations of
the temperature method.</p>
</sec>
</sec>
<sec id="Ch1.S4" sec-type="conclusions">
  <label>4</label><title>Summary and outlook</title>
      <p id="d1e4325">The side view height estimation method introduced in Part 1 was tested on
several recent volcanic plumes that were observed near the limb at very
oblique angles by GOES-17 but were viewed under favorable conditions by
Himawari-8. Height estimates from the new method were compared to
independent geometric estimates derived from shadows, stereo observations,
and ground-based video footage as well as to brightness-temperature-based
height estimates. Although the number of test cases is relatively small – a
total of seven eruptions were analyzed – and more validation is certainly
needed, a few conclusions have already emerged from the results.</p>
      <p id="d1e4328">The side view heights were typically within 500 m of the other geometric
height estimates, including expert-derived plume heights from nearby video
camera images, building confidence in the technique. Somewhat surprisingly,
height estimates could also be calculated from GOES-17–Himawari-8 stereo
observations, which also agreed well with the side view estimates. Near-limb
imagery is generally unsuitable for automated stereo retrievals, because the
standard area-based image matchers are unable to correlate such extreme
views with less oblique ones. A human observer, however, can build a 3D
mental model of the plume and identify common features (tops, edges,
striations) even in images taken from vastly different perspectives. The
3D Winds automated stereo algorithm, one of the comparison methods in
this study, has recently been updated to handle geostationary satellite
pairs too (Carr et al., 2020), but its coverage is limited to overlap areas
within 65<inline-formula><mml:math id="M295" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> of the subsatellite points and thus excludes our case
study volcanoes. Extending the code's functionality to allow the manual
specification of stereo point pairs between GOES-17 near-limb views and
Himawari-8 images might be worth the effort, given the positive experience
gained in our study.</p>
      <p id="d1e4340">The temperature method, although irreplaceable in routine operations,
demonstrated its well-known biases. For weak plumes or for the initial
phases of strong plumes, when the eruption column is small and narrow,
temperature-based heights can underestimate geometric heights by 2–3 km.
Such subpixel plumes only partially fill the relatively large (2 km at the
subsatellite point) thermal infrared field of<?pagebreak page12225?> view, which usually leads to
warm-biased brightness temperatures and low-biased heights due to radiance
contribution from the surface or lower-level clouds. Such subpixel biases
are reduced in the later phases of strong eruptions that develop large and
optically thick umbrella clouds. Unlike the side view method, however, the
temperature method hardly ever captured the overshooting tops, as these
features usually remained at the (infrared) subpixel scale even in strong plumes.</p>
      <p id="d1e4343">The temperature method also often yielded ambiguous results. When the plume
temperature falls within the narrow temperature range of the
quasi-isothermal layer above the tropopause, multiple height solutions
within a wide (10<inline-formula><mml:math id="M296" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> km) altitude range are possible. Although one of the
matching heights sometimes agreed well with the geometric umbrella height,
it was impossible to select the right solution a priori. Besides,
temperature-based heights are generally sensitive to the assumed atmospheric
temperature profile. Three of the investigated eruptions produced
undercooled plumes at certain times, even precluding the application of the
temperature method. The results also show that despite limb cooling, the
GOES-17 dark pixel temperature can be warmer than the Himawari-8 value. The
minimum temperature measured over the plume is an intricate function of view
direction, plume size and 3D morphology, and the temperature of the
background against which the plume is observed, further complicating the
interpretation of temperature-based height retrievals.</p>
      <p id="d1e4354">We believe the presented case studies have demonstrated that GOES-17
near-limb observations, either independently or in stereo with Himawari-8
views, can be a useful complementary to the more established height
retrieval methods. The study of Bruckert et al. (2021) in the current issue,
for example, has found that the better characterization of the height and
timing of the explosive puffs during the 2019 Raikoke eruption, enabled by
GOES-17 oblique imagery, improves the simulation of the temporal evolution
of total atmospheric ash content. Constraining the source terms in the
modeling of near-field plumes might indeed be the most promising application
of the side view height retrieval technique.</p>
</sec>

      
      </body>
    <back><notes notes-type="dataavailability"><title>Data availability</title>

      <p id="d1e4362">The GOES-R ABI L1B radiances are available from the NOAA Comprehensive Large Array-data Stewardship System (CLASS) archive
(<ext-link xlink:href="https://doi.org/10.7289/V5BV7DSR" ext-link-type="DOI">10.7289/V5BV7DSR</ext-link>, GOES-R Calibration Working Group and GOES-R Series Program, 2017).
Himawari-8/9 gridded data are distributed by the Center for Environmental Remote Sensing (CEReS), Chiba University, Japan
(<uri>http://www.cr.chiba-u.jp/databases/GEO/H8_9/FD/index.html</uri>, last access: 10 August 2021, Takenaka et al., 2020; Yamamoto et al., 2020).
The Holocene Volcano List is compiled by the Global Volcanism Program (2013).
The KVERT Volcano list is
available at <uri>http://www.kscnet.ru/ivs/kvert/volcano.php?lang=en</uri> (last access: 10 August 2021).
VolSatView uses the following dataset: National Centers for Environmental
Prediction/National Weather Service/NOAA/U.S. Department of Commerce,
European Centre for Medium-Range Weather Forecasts, and Unidata/University
Corporation for Atmospheric Research, <ext-link xlink:href="https://doi.org/10.5065/549X-KE89" ext-link-type="DOI">10.5065/549X-KE89</ext-link>, 2003.
The PeakVisor summit database (freely searchable on the website) and mobile app (requiring a subscription) are available at <uri>https://peakvisor.com</uri> (last access: 10 August 2021).</p>
  </notes><notes notes-type="videosupplement"><title>Video supplement</title>

      <p id="d1e4383">All mentioned animations are available in the Supplement.</p>
  </notes><app-group>
        <supplementary-material position="anchor"><p id="d1e4386">The supplement related to this article is available online at: <inline-supplementary-material xlink:href="https://doi.org/10.5194/acp-21-12207-2021-supplement" xlink:title="pdf">https://doi.org/10.5194/acp-21-12207-2021-supplement</inline-supplementary-material>.</p></supplementary-material>
        </app-group><notes notes-type="authorcontribution"><title>Author contributions</title>

      <p id="d1e4395">ÁH developed the idea and methodology of the side view retrievals
during discussions with GAH and SAB. Retrievals from the 3D Winds stereo
code were provided by its developers JLC and DLW, while retrievals from the
VolSatView information system were provided by its creators AAB, AAM, OAG,
and DVM. ÁH analyzed the results and prepared the manuscript with
significant contributions from all authors.</p>
  </notes><notes notes-type="competinginterests"><title>Competing interests</title>

      <p id="d1e4401">The authors declare that they have no conflict of interest.</p>
  </notes><notes notes-type="disclaimer"><title>Disclaimer</title>

      <p id="d1e4407">Publisher’s note: Copernicus Publications remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.</p>
  </notes><notes notes-type="sistatement"><title>Special issue statement</title>

      <p id="d1e4413">This article is part of the special issue “Satellite observations, in situ measurements and model simulations of the 2019 Raikoke eruption (ACP/AMT/GMD inter-journal SI)”. It is not associated with a conference.</p>
  </notes><ack><title>Acknowledgements</title><p id="d1e4419">Ákos Horváth, Gholam Ali Hoshyaripour, and Stefan A. Buehler are members of the VolPlume project within the
research unit VolImpact funded by the German Research Foundation (DFG, FOR
2820). This work also contributes to the Cluster of Excellence
“CLICCS – Climate, Climatic Change, and Society” funded by the Deutsche
Forschungsgemeinschaft (DFG, EXC 2037, project number 390683824) and to the
Center for Earth System Research and Sustainability (CEN) of Universität
Hamburg.</p></ack><notes notes-type="financialsupport"><title>Financial support</title>

      <p id="d1e4424">This research has been supported by the Deutsche Forschungsgemeinschaft (grant nos. FOR 2820 and EXC 2037, project number 390683824).</p>
  </notes><notes notes-type="reviewstatement"><title>Review statement</title>

      <p id="d1e4430">This paper was edited by Peter Haynes and reviewed by two anonymous referees.</p>
  </notes><ref-list>
    <title>References</title>

      <ref id="bib1.bib1"><label>1</label><?label 1?><mixed-citation>Bachmeier, S.: Ulawun volcano erupts in Papua New Guinea, CIMSS Satellite
Blog, available at:
<uri>https://cimss.ssec.wisc.edu/satellite-blog/archives/33624</uri> (last access: 10 August 2021), 2019.</mixed-citation></ref>
      <ref id="bib1.bib2"><label>2</label><?label 1?><mixed-citation>Bildirici, I. O.: Quasi indicatrix approach for distortion visualization and
analysis for map projections, Int. J. Geogr. Inf. Sci., 29, 2295–2309,
<ext-link xlink:href="https://doi.org/10.1080/13658816.2015.1074236" ext-link-type="DOI">10.1080/13658816.2015.1074236</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib3"><label>3</label><?label 1?><mixed-citation>Bildirici, I. O. and Ulugtekin, N.: Visualization of map projection
distortions by using finite circles: an alternative approach to Tissot's
indicatrix, 25th International Cartographic Conference, Paris, France, 3–8 July 2011, available at: <uri>https://icaci.org/files/documents/ICC_proceedings/ICC2011/Oral Presentations PDF/C4-Map projection/CO-279.pdf</uri> (last access: 10 August 2021),
2011.</mixed-citation></ref>
      <ref id="bib1.bib4"><label>4</label><?label 1?><mixed-citation>Bril, A. A., Kashnitskii, A. V., and Uvarov, I. A.: Possibilities for
estimating the heights of volcanic ash plumes in the information system of
remote monitoring of the activity of Kamchatka and Kuril volcanoes
“VolSatView”, Information Technologies in Remote Sensing of the Earth –
RORSE 2018, 171–176, <ext-link xlink:href="https://doi.org/10.21046/rorse2018.171" ext-link-type="DOI">10.21046/rorse2018.171</ext-link>, 2019.</mixed-citation></ref>
      <ref id="bib1.bib5"><label>5</label><?label 1?><mixed-citation>Bruckert, J., Hoshyaripour, G. A., Horváth, Á., Muser, L., Prata, F. J., Hoose, C., and Vogel, B.: Online treatment of eruption dynamics improves the volcanic ash and SO<inline-formula><mml:math id="M297" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:math></inline-formula> dispersion forecast: case of the Raikoke 2019 eruption, Atmos. Chem. Phys. Discuss. [preprint], <ext-link xlink:href="https://doi.org/10.5194/acp-2021-459" ext-link-type="DOI">10.5194/acp-2021-459</ext-link>, in review, 2021.</mixed-citation></ref>
      <ref id="bib1.bib6"><label>6</label><?label 1?><mixed-citation>Burton, R. R., Woodhouse, M. J., Gadian, A. M., and Mobbs, S. D.: The use of
a numerical weather prediction model to simulate near-field volcanic plumes,
Atmosphere, 11, 594, <ext-link xlink:href="https://doi.org/10.3390/atmos11060594" ext-link-type="DOI">10.3390/atmos11060594</ext-link>, 2020.</mixed-citation></ref>
      <ref id="bib1.bib7"><label>7</label><?label 1?><mixed-citation>Carr, J. L., Wu, D. L., Daniels, J., Friberg, M. D., Bresky, W., and Madani,
H.: GEO–GEO stereo-tracking of Atmospheric Motion Vectors (AMVs) from the
geostationary ring, Remote Sens., 12, 3779,
<ext-link xlink:href="https://doi.org/10.3390/rs12223779" ext-link-type="DOI">10.3390/rs12223779</ext-link>, 2020.</mixed-citation></ref>
      <ref id="bib1.bib8"><label>8</label><?label 1?><mixed-citation>Carr, J. L., Wu, D. L., Wolfe, R. E., Madani, H., Lin, G. G., and Tan, B.:
Joint 3D-wind retrievals with stereoscopic views from MODIS and GOES, Remote
Sens., 11, 2100, <ext-link xlink:href="https://doi.org/10.3390/rs11182100" ext-link-type="DOI">10.3390/rs11182100</ext-link>, 2019.</mixed-citation></ref>
      <ref id="bib1.bib9"><label>9</label><?label 1?><mixed-citation>Crafford, A. E., and Venzke, E. (Eds.):Global Volcanism Program, Report on Raikoke (Russia), Bulletin of the Global Volcanism Network, 44:8, Smithsonian Institution, <ext-link xlink:href="https://doi.org/10.5479/si.GVP.BGVN201908-290250" ext-link-type="DOI">10.5479/si.GVP.BGVN201908-290250</ext-link>, 2019.</mixed-citation></ref>
      <ref id="bib1.bib10"><label>10</label><?label 1?><mixed-citation>Dehnavi, S., Maghsoudi, Y., Zakšek, K., Valadan Zoej, M. J., Seckmeyer,
G., and Skripachev, V.: Cloud detection based on high resolution stereo
pairs of the geostationary Meteosat Images, Remote Sens., 12, 371,
<ext-link xlink:href="https://doi.org/10.3390/rs12030371" ext-link-type="DOI">10.3390/rs12030371</ext-link>, 2020.</mixed-citation></ref>
      <ref id="bib1.bib11"><label>11</label><?label 1?><mixed-citation>Girina, O. A., Loupian, E. A., Sorokin, A. A., Melnikov, D. V., Romanova, I.
M., Kashnitskii, A. V., Uvarov, I. A., Malkovsky, S. I., Korolev, S. P.,
Manevich, A. G., and Kramareva, L. S.: Comprehensive monitoring of explosive
volcanic eruptions of Kamchatka, Ed. Girina, O. A.,
Petropavlovsk-Kamchatsky, IVS FEB RAS, 192 pp., available at:
<uri>https://elibrary.ru/item.asp?id=37061627</uri> (last access: 10 August 2021), 2018 (in Russian).</mixed-citation></ref>
      <ref id="bib1.bib12"><label>12</label><?label 1?><mixed-citation>Girina, O. A., Melnikov, D. V., Manevich, A. G., Kashnitskii, A. V.,
Kramareva, L. S., and Nuzhdaev, A. A.: Analysis of the events of the
explosive eruption of Bezymianny volcano on October 21, 2020, based on
satellite data, Sovremennye problemy distantsionnogo zondirovaniya Zemli iz
kosmosa, 17, 297–303,
<ext-link xlink:href="https://doi.org/10.21046/2070-7401-2020-17-5-297-303" ext-link-type="DOI">10.21046/2070-7401-2020-17-5-297-303</ext-link>, 2020 (in Russian).</mixed-citation></ref>
      <ref id="bib1.bib13"><label>13</label><?label 1?><mixed-citation>Global Volcanism Program: Volcanoes of the World, v. 4.9.0 (4 June 2020),
edited by: Venzke, E, Smithsonian Institution,
<ext-link xlink:href="https://doi.org/10.5479/si.GVP.VOTW4-2013" ext-link-type="DOI">10.5479/si.GVP.VOTW4-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib14"><label>14</label><?label 1?><mixed-citation>GOES-R Calibration Working Group and GOES-R Series Program: NOAA GOES-R Series Advanced Baseline Imager (ABI) Level 1b Radiances, NOAA National Centers for Environmental Information, <ext-link xlink:href="https://doi.org/10.7289/V5BV7DSR" ext-link-type="DOI">10.7289/V5BV7DSR</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib15"><label>15</label><?label 1?><mixed-citation>Gordeev, E. I., Girina, O. A., Lupyan, E. A., Sorokin, A. A., Kramareva, L.
S., Efremov, V. Yu., Kashnitskii, A. V., Uvarov, I. A., Burtsev, M. A.,
Romanova, I. M., Melnikov, D. V., Manevich, A. G., Korolev, S. P., and
Verkhoturov, A. L.: The VolSatView information system for monitoring the
volcanic activity in Kamchatka and on the Kuril Islands, J. Volc. Seism, 10,
382–394, <ext-link xlink:href="https://doi.org/10.1134/S074204631606004X" ext-link-type="DOI">10.1134/S074204631606004X</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib16"><label>16</label><?label 1?><mixed-citation>Horváth, Á., Carr, J. L., Girina, O. A., Wu, D. L., Bril, A. A., Mazurov, A. A., Melnikov, D. V., Hoshyaripour, G. A., and Buehler, S. A.: Geometric estimation of volcanic eruption column height from
GOES-R near-limb imagery – Part 1: Methodology, Atmos. Chem. Phys., 21, 12189–12206, <ext-link xlink:href="https://doi.org/10.5194/acp-21-12189-2021" ext-link-type="DOI">10.5194/acp-21-12189-2021</ext-link>, 2021.</mixed-citation></ref>
      <ref id="bib1.bib17"><label>17</label><?label 1?><mixed-citation>ITU-R (International Telecommunication Union Radiocommunication Sector):
Recommendation P.835-6: Reference standard atmospheres, available at:
<uri>https://www.itu.int/rec/R-REC-P.835-6-201712-I/en</uri> (last access: 10 August 2021), 2017.</mixed-citation></ref>
      <ref id="bib1.bib18"><label>18</label><?label 1?><mixed-citation>McCorkel, J., Van Naarden, J., Lindsey, D., Efremova, B., Coakley, M.,
Black, M., and Krimchansky, A.: GOES-17 Advanced Baseline Imager performance
recovery summary, in: Proc. IGARSS 2019 – IEEE Int. Geosci. and Remote Sens.
Symp., available at: <uri>https://ntrs.nasa.gov/search.jsp?R=20190028689</uri> (last access: 10 August 2021), 2019.</mixed-citation></ref>
      <ref id="bib1.bib19"><label>19</label><?label 1?><mixed-citation>National Centers for Environmental
Prediction/National Weather Service/NOAA/U.S. Department of Commerce,
European Centre for Medium-Range Weather Forecasts, and Unidata/University
Corporation for Atmospheric Research: Historical Unidata Internet Data
Distribution (IDD) Gridded Model Data, Research Data Archive at the National
Center for Atmospheric Research, Computational and Information Systems
Laboratory, <ext-link xlink:href="https://doi.org/10.5065/549X-KE89" ext-link-type="DOI">10.5065/549X-KE89</ext-link>, 2003.</mixed-citation></ref>
      <ref id="bib1.bib20"><label>20</label><?label 1?><mixed-citation>Pavolonis, M. J., Heidinger, A. K., and Sieglaff, J.: Automated retrievals
of volcanic ash and dust cloud properties from upwelling infrared
measurements, J. Geophys. Res.-Atmos., 118, 1436–1458,
<ext-link xlink:href="https://doi.org/10.1002/jgrd.50173" ext-link-type="DOI">10.1002/jgrd.50173</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib21"><label>21</label><?label 1?><mixed-citation>Yamamoto, Y., Ichii, K., Higuchi, A., and Takenaka, H.: Geolocation accuracy
assessment of Himawari-8/AHI imagery for application to terrestrial
monitoring, Remote Sens., 12, 1372, <ext-link xlink:href="https://doi.org/10.3390/rs12091372" ext-link-type="DOI">10.3390/rs12091372</ext-link>,
2020.</mixed-citation></ref>
      <ref id="bib1.bib22"><label>22</label><?label 1?><mixed-citation>Zakšek, K., Hort, M., Zaletelj, J., and Langmann, B.: Monitoring volcanic ash cloud top height through simultaneous retrieval of optical data from polar orbiting and geostationary satellites, Atmos. Chem. Phys., 13, 2589–2606, <ext-link xlink:href="https://doi.org/10.5194/acp-13-2589-2013" ext-link-type="DOI">10.5194/acp-13-2589-2013</ext-link>, 2013.</mixed-citation></ref>

  </ref-list></back>
    <!--<article-title-html>Geometric estimation of volcanic eruption column height from GOES-R near-limb imagery – Part 2: Case studies</article-title-html>
<abstract-html><p>In a companion paper (Horváth et al., 2021), we
introduced a new technique to estimate volcanic eruption column height from
extremely oblique near-limb geostationary views. The current paper
demonstrates and validates the technique in a number of recent eruptions,
ranging from ones with weak columnar plumes to subplinian events with
massive umbrella clouds and overshooting tops that penetrate the
stratosphere. Due to its purely geometric nature, the new method is shown to
be unaffected by the limitations of the traditional brightness temperature
method, such as height underestimation in subpixel and semitransparent
plumes, ambiguous solutions near the tropopause temperature inversion, or
the lack of solutions in undercooled plumes. The side view height estimates
were in good agreement with plume heights derived from ground-based video
and satellite stereo observations, suggesting they can be a useful
complement to established techniques.</p></abstract-html>
<ref-html id="bib1.bib1"><label>1</label><mixed-citation>
Bachmeier, S.: Ulawun volcano erupts in Papua New Guinea, CIMSS Satellite
Blog, available at:
<a href="https://cimss.ssec.wisc.edu/satellite-blog/archives/33624" target="_blank"/> (last access: 10 August 2021), 2019.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>2</label><mixed-citation>
Bildirici, I. O.: Quasi indicatrix approach for distortion visualization and
analysis for map projections, Int. J. Geogr. Inf. Sci., 29, 2295–2309,
<a href="https://doi.org/10.1080/13658816.2015.1074236" target="_blank">https://doi.org/10.1080/13658816.2015.1074236</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>3</label><mixed-citation>
Bildirici, I. O. and Ulugtekin, N.: Visualization of map projection
distortions by using finite circles: an alternative approach to Tissot's
indicatrix, 25th International Cartographic Conference, Paris, France, 3–8 July 2011, available at: <a href="https://icaci.org/files/documents/ICC_proceedings/ICC2011/Oral Presentations PDF/C4-Map projection/CO-279.pdf" target="_blank"/> (last access: 10 August 2021),
2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>4</label><mixed-citation>
Bril, A. A., Kashnitskii, A. V., and Uvarov, I. A.: Possibilities for
estimating the heights of volcanic ash plumes in the information system of
remote monitoring of the activity of Kamchatka and Kuril volcanoes
“VolSatView”, Information Technologies in Remote Sensing of the Earth –
RORSE 2018, 171–176, <a href="https://doi.org/10.21046/rorse2018.171" target="_blank">https://doi.org/10.21046/rorse2018.171</a>, 2019.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>5</label><mixed-citation>
Bruckert, J., Hoshyaripour, G. A., Horváth, Á., Muser, L., Prata, F. J., Hoose, C., and Vogel, B.: Online treatment of eruption dynamics improves the volcanic ash and SO<sub>2</sub> dispersion forecast: case of the Raikoke 2019 eruption, Atmos. Chem. Phys. Discuss. [preprint], <a href="https://doi.org/10.5194/acp-2021-459" target="_blank">https://doi.org/10.5194/acp-2021-459</a>, in review, 2021.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>6</label><mixed-citation>
Burton, R. R., Woodhouse, M. J., Gadian, A. M., and Mobbs, S. D.: The use of
a numerical weather prediction model to simulate near-field volcanic plumes,
Atmosphere, 11, 594, <a href="https://doi.org/10.3390/atmos11060594" target="_blank">https://doi.org/10.3390/atmos11060594</a>, 2020.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>7</label><mixed-citation>
Carr, J. L., Wu, D. L., Daniels, J., Friberg, M. D., Bresky, W., and Madani,
H.: GEO–GEO stereo-tracking of Atmospheric Motion Vectors (AMVs) from the
geostationary ring, Remote Sens., 12, 3779,
<a href="https://doi.org/10.3390/rs12223779" target="_blank">https://doi.org/10.3390/rs12223779</a>, 2020.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>8</label><mixed-citation>
Carr, J. L., Wu, D. L., Wolfe, R. E., Madani, H., Lin, G. G., and Tan, B.:
Joint 3D-wind retrievals with stereoscopic views from MODIS and GOES, Remote
Sens., 11, 2100, <a href="https://doi.org/10.3390/rs11182100" target="_blank">https://doi.org/10.3390/rs11182100</a>, 2019.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>9</label><mixed-citation>
Crafford, A. E., and Venzke, E. (Eds.):Global Volcanism Program, Report on Raikoke (Russia), Bulletin of the Global Volcanism Network, 44:8, Smithsonian Institution, <a href="https://doi.org/10.5479/si.GVP.BGVN201908-290250" target="_blank">https://doi.org/10.5479/si.GVP.BGVN201908-290250</a>, 2019.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>10</label><mixed-citation>
Dehnavi, S., Maghsoudi, Y., Zakšek, K., Valadan Zoej, M. J., Seckmeyer,
G., and Skripachev, V.: Cloud detection based on high resolution stereo
pairs of the geostationary Meteosat Images, Remote Sens., 12, 371,
<a href="https://doi.org/10.3390/rs12030371" target="_blank">https://doi.org/10.3390/rs12030371</a>, 2020.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>11</label><mixed-citation>
Girina, O. A., Loupian, E. A., Sorokin, A. A., Melnikov, D. V., Romanova, I.
M., Kashnitskii, A. V., Uvarov, I. A., Malkovsky, S. I., Korolev, S. P.,
Manevich, A. G., and Kramareva, L. S.: Comprehensive monitoring of explosive
volcanic eruptions of Kamchatka, Ed. Girina, O. A.,
Petropavlovsk-Kamchatsky, IVS FEB RAS, 192 pp., available at:
<a href="https://elibrary.ru/item.asp?id=37061627" target="_blank"/> (last access: 10 August 2021), 2018 (in Russian).
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>12</label><mixed-citation>
Girina, O. A., Melnikov, D. V., Manevich, A. G., Kashnitskii, A. V.,
Kramareva, L. S., and Nuzhdaev, A. A.: Analysis of the events of the
explosive eruption of Bezymianny volcano on October 21, 2020, based on
satellite data, Sovremennye problemy distantsionnogo zondirovaniya Zemli iz
kosmosa, 17, 297–303,
<a href="https://doi.org/10.21046/2070-7401-2020-17-5-297-303" target="_blank">https://doi.org/10.21046/2070-7401-2020-17-5-297-303</a>, 2020 (in Russian).
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>13</label><mixed-citation>
Global Volcanism Program: Volcanoes of the World, v. 4.9.0 (4 June 2020),
edited by: Venzke, E, Smithsonian Institution,
<a href="https://doi.org/10.5479/si.GVP.VOTW4-2013" target="_blank">https://doi.org/10.5479/si.GVP.VOTW4-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>14</label><mixed-citation>
GOES-R Calibration Working Group and GOES-R Series Program: NOAA GOES-R Series Advanced Baseline Imager (ABI) Level 1b Radiances, NOAA National Centers for Environmental Information, <a href="https://doi.org/10.7289/V5BV7DSR" target="_blank">https://doi.org/10.7289/V5BV7DSR</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>15</label><mixed-citation>
Gordeev, E. I., Girina, O. A., Lupyan, E. A., Sorokin, A. A., Kramareva, L.
S., Efremov, V. Yu., Kashnitskii, A. V., Uvarov, I. A., Burtsev, M. A.,
Romanova, I. M., Melnikov, D. V., Manevich, A. G., Korolev, S. P., and
Verkhoturov, A. L.: The VolSatView information system for monitoring the
volcanic activity in Kamchatka and on the Kuril Islands, J. Volc. Seism, 10,
382–394, <a href="https://doi.org/10.1134/S074204631606004X" target="_blank">https://doi.org/10.1134/S074204631606004X</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>16</label><mixed-citation>
Horváth, Á., Carr, J. L., Girina, O. A., Wu, D. L., Bril, A. A., Mazurov, A. A., Melnikov, D. V., Hoshyaripour, G. A., and Buehler, S. A.: Geometric estimation of volcanic eruption column height from
GOES-R near-limb imagery – Part 1: Methodology, Atmos. Chem. Phys., 21, 12189–12206, <a href="https://doi.org/10.5194/acp-21-12189-2021" target="_blank">https://doi.org/10.5194/acp-21-12189-2021</a>, 2021.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>17</label><mixed-citation>
ITU-R (International Telecommunication Union Radiocommunication Sector):
Recommendation P.835-6: Reference standard atmospheres, available at:
<a href="https://www.itu.int/rec/R-REC-P.835-6-201712-I/en" target="_blank"/> (last access: 10 August 2021), 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>18</label><mixed-citation>
McCorkel, J., Van Naarden, J., Lindsey, D., Efremova, B., Coakley, M.,
Black, M., and Krimchansky, A.: GOES-17 Advanced Baseline Imager performance
recovery summary, in: Proc. IGARSS 2019 – IEEE Int. Geosci. and Remote Sens.
Symp., available at: <a href="https://ntrs.nasa.gov/search.jsp?R=20190028689" target="_blank"/> (last access: 10 August 2021), 2019.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>19</label><mixed-citation>
National Centers for Environmental
Prediction/National Weather Service/NOAA/U.S. Department of Commerce,
European Centre for Medium-Range Weather Forecasts, and Unidata/University
Corporation for Atmospheric Research: Historical Unidata Internet Data
Distribution (IDD) Gridded Model Data, Research Data Archive at the National
Center for Atmospheric Research, Computational and Information Systems
Laboratory, <a href="https://doi.org/10.5065/549X-KE89" target="_blank">https://doi.org/10.5065/549X-KE89</a>, 2003.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>20</label><mixed-citation>
Pavolonis, M. J., Heidinger, A. K., and Sieglaff, J.: Automated retrievals
of volcanic ash and dust cloud properties from upwelling infrared
measurements, J. Geophys. Res.-Atmos., 118, 1436–1458,
<a href="https://doi.org/10.1002/jgrd.50173" target="_blank">https://doi.org/10.1002/jgrd.50173</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>21</label><mixed-citation>
Yamamoto, Y., Ichii, K., Higuchi, A., and Takenaka, H.: Geolocation accuracy
assessment of Himawari-8/AHI imagery for application to terrestrial
monitoring, Remote Sens., 12, 1372, <a href="https://doi.org/10.3390/rs12091372" target="_blank">https://doi.org/10.3390/rs12091372</a>,
2020.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>22</label><mixed-citation>
Zakšek, K., Hort, M., Zaletelj, J., and Langmann, B.: Monitoring volcanic ash cloud top height through simultaneous retrieval of optical data from polar orbiting and geostationary satellites, Atmos. Chem. Phys., 13, 2589–2606, <a href="https://doi.org/10.5194/acp-13-2589-2013" target="_blank">https://doi.org/10.5194/acp-13-2589-2013</a>, 2013.
</mixed-citation></ref-html>--></article>
