<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" xml:lang="en" dtd-version="3.0">
  <front>
    <journal-meta><journal-id journal-id-type="publisher">ACP</journal-id><journal-title-group>
    <journal-title>Atmospheric Chemistry and Physics</journal-title>
    <abbrev-journal-title abbrev-type="publisher">ACP</abbrev-journal-title><abbrev-journal-title abbrev-type="nlm-ta">Atmos. Chem. Phys.</abbrev-journal-title>
  </journal-title-group><issn pub-type="epub">1680-7324</issn><publisher>
    <publisher-name>Copernicus Publications</publisher-name>
    <publisher-loc>Göttingen, Germany</publisher-loc>
  </publisher></journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.5194/acp-18-17801-2018</article-id><title-group><article-title>Measurements of I/SVOCs in biomass-burning smoke using solid-phase
extraction disks and two-dimensional gas chromatography</article-title><alt-title>Measurements of I/SVOCs in biomass-burning smoke</alt-title>
      </title-group><?xmltex \runningtitle{Measurements of I/SVOCs in biomass-burning smoke}?><?xmltex \runningauthor{L. E. Hatch et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Hatch</surname><given-names>Lindsay E.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Rivas-Ubach</surname><given-names>Albert</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3 aff5">
          <name><surname>Jen</surname><given-names>Coty N.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0002-3633-4614</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Lipton</surname><given-names>Mary</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-7749-0077</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3 aff4">
          <name><surname>Goldstein</surname><given-names>Allen H.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0003-4014-4896</ext-link></contrib>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>Barsanti</surname><given-names>Kelley C.</given-names></name>
          <email>kbarsanti@engr.ucr.edu</email>
        <ext-link>https://orcid.org/0000-0002-6065-8643</ext-link></contrib>
        <aff id="aff1"><label>1</label><institution>Department of Chemical and Environmental Engineering and College of
Engineering – Center for Environmental Research and Technology (CE-CERT),
University of California, Riverside, Riverside, CA 92507, USA</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>Environmental and Molecular Sciences Laboratory, Pacific Northwest
National Laboratory, Richland, WA 99352, USA</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>Department of Environmental Science, Policy, and Management,
University of California,  Berkeley, CA 94720, USA</institution>
        </aff>
        <aff id="aff4"><label>4</label><institution>Department of Civil and Environmental Engineering, University of
California, Berkeley, Berkeley, CA 94720, USA</institution>
        </aff>
        <aff id="aff5"><label>a</label><institution>current address: Department of Chemical Engineering,
Carnegie Mellon University, Pittsburgh, PA 15213, USA</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">Kelley C. Barsanti (kbarsanti@engr.ucr.edu)</corresp></author-notes><pub-date><day>14</day><month>December</month><year>2018</year></pub-date>
      
      <volume>18</volume>
      <issue>24</issue>
      <fpage>17801</fpage><lpage>17817</lpage>
      <history>
        <date date-type="received"><day>20</day><month>August</month><year>2018</year></date>
           <date date-type="rev-request"><day>30</day><month>August</month><year>2018</year></date>
           <date date-type="rev-recd"><day>29</day><month>November</month><year>2018</year></date>
           <date date-type="accepted"><day>30</day><month>November</month><year>2018</year></date>
      </history>
      <permissions>
        
        
      <license license-type="open-access"><license-p>This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this licence, visit <ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/licenses/by/4.0/">https://creativecommons.org/licenses/by/4.0/</ext-link></license-p></license></permissions><self-uri xlink:href="https://acp.copernicus.org/articles/.html">This article is available from https://acp.copernicus.org/articles/.html</self-uri><self-uri xlink:href="https://acp.copernicus.org/articles/.pdf">The full text article is available as a PDF file from https://acp.copernicus.org/articles/.pdf</self-uri>
      <abstract>
    <p id="d1e153">Biomass-burning organic-aerosol (OA) emissions are known
to exhibit semi-volatile behavior that impacts OA loading during plume
transport. Because such semi-volatile behavior depends in part on OA
composition, improved speciation of intermediate and semi-volatile organic
compounds (I/SVOCs) emitted during fires is needed to assess the competing
effects of primary OA volatilization and secondary OA production. In this
study, 18 laboratory fires were sampled in which a range of fuel types were
burned. Emitted I/SVOCs were collected onto Teflon filters and solid-phase
extraction (SPE) disks to qualitatively characterize particulate and gaseous
I/SVOCs, respectively. Derivatized filter extracts were analyzed using
comprehensive two-dimensional gas chromatography with time-of-flight mass
spectrometry (GC <inline-formula><mml:math id="M1" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS). Quality control tests were performed
using biomass-burning relevant standards and demonstrate the utility of SPE
disks for untargeted analysis of air samples. The observed chromatographic
profiles of I/SVOCs in coniferous fuel-derived smoke samples were well
correlated with each other, but poorly correlated with other fuel types
(e.g., herbaceous and chaparral fuels). Emissions of benzenediol isomers
were also shown to be fuel dependent. The combined Teflon and SPE filter
data captured differences in gas-particle partitioning of the benzenediol
isomers, with hydroquinone having a significantly higher particle-phase
fraction than catechol due to its lower volatility. Additionally, the
speciated volatility distribution of I/SVOCs in smoke from a rotten-log fire
was estimated to evaluate the composition of potentially volatilized primary
OA, which was entirely attributed to oxygenated (or other heteroatomic)
compounds. The isomer-dependent partitioning and the speciated volatility
distributions both suggest the need for better understanding of gas-phase
and heterogenous reaction pathways of biomass-burning-derived I/SVOCs in
order to represent the atmospheric chemistry of smoke in models.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p id="d1e170">Biomass burning emits high levels of carbonaceous material,
including trace gases, black carbon, and primary organic aerosol (POA) (Akagi
et al., 2011; Andreae and Merlet, 2001; Bond et al., 2004) that can
significantly impact air quality (Kunzli et al., 2006; Liu et al., 2015;
Naeher et al., 2007) and climate (Hobbs et al., 1997; Liu et al., 2014). The
high concentrations of trace organic gases in smoke plumes suggest that their
atmospheric processing could result in substantial production of secondary
organic aerosol (SOA), as has been observed in a number of laboratory and
field studies that investigated the photochemical aging of biomass-burning
smoke (Cubison et al., 2011; DeCarlo et al., 2010; Grieshop et al., 2009a;
Hennigan et al., 2011; Ortega et al., 2013; Tkacik et al., 2017; Yokelson et
al., 2009). However,<?pagebreak page17802?> other studies have demonstrated negligible or even net
loss of OA downwind of fires due to evaporative losses of POA (Akagi et al.,
2012; Capes et al., 2008; Jolleys et al., 2012; May et al., 2015). Such
observations are further supported by modeling studies, which have shown that significant SOA formation in
biomass-burning plumes can be balanced by considerable losses of OA due to
volatilization (Bian et al., 2017). In addition to affecting total OA mass,
evaporation can impact oxidation rates and atmospheric lifetimes of
traditional POA markers (e.g., levoglucosan in biomass-burning smoke) (May et
al., 2012). Better understanding of the relative contributions of
dilution-induced volatilization and SOA production requires speciation of the
intermediate and semi-volatile organic compounds (I/SVOCs) in fresh
biomass-burning smoke and estimation of their propensity to partition between
gas and particle phases. Such measurements can further help to assess the
available oxidation pathways of SOA precursors (i.e., gas-phase vs.
heterogeneous oxidation).</p>
      <p id="d1e173">Of the thousands of biomass-burning-related emissions studies available in
the literature, relatively few have targeted speciation of I/SVOCs in both
gas and particle phases. Those few studies generally characterized emissions
from either a narrow range of compound classes or fuel types. McDonald et
al. (2000) reported the emissions from residential wood combustion for
selected I/SVOCs, including polycyclic aromatic hydrocarbons (PAHs) and eight
methoxyphenols. Schauer et al. (2001) and Hays et al. (2002) have reported
the most comprehensive speciation of gas- and particle-phase I/SVOCs to date,
including hydrocarbons (alkanes, PAHs), alkanoic acids, substituted phenols,
and anhydrosugars, among other more and less volatile compounds in the
emissions of three types of residential wood combustion (Schauer et al.,
2001) and burning of six foliar fuels (Hays et al., 2002). Mazzoleni et
al. (2007) investigated I/SVOC emissions of methoxyphenols, levoglucosan, and
organic acids across a range of fuel types and burning conditions, including
laboratory, fireplace, and prescribed fires. Other studies have investigated
I/SVOC emissions from selected fuel types, including wheat and Kentucky blue
grass (Dhammapala et al., 2007). Gaston et al. (2016) conducted online
measurements of ambient gas- and particle-phase emissions from residential
wood combustion in real time, however without isomer speciation capability.</p>
      <p id="d1e176">All of the offline I/SVOC characterization studies cited above collected
samples using a filter and polyurethane foam (PUF) plug (or
PUF/XAD-sorbent/PUF sandwich) to trap particle- and gas-phase I/SVOCs,
respectively. Due to the drawbacks of PUF/XAD sampling and analysis,
including high solvent needs and a relatively large physical size that
exacerbates shipping costs and storage demands (Galarneau et al., 2006),
alternative approaches, such as sorbent-impregnated filters (SIFs), have been
investigated. Galarneau et al. (2006) custom-coated glass-fiber filters with
XAD resin and found that the collection and recovery of compounds from
ambient samples compared well to PUF measurements. Similarly Paolini et
al. (2016) functionalized glass-fiber filters with phenyl moieties for
targeted collection of gaseous PAHs and found recoveries of PAHs comparable
to PUF plugs. As with lab-coated SIFs, commercial solid-phase extraction
disks (hereafter called SPE filters) consist of a sorbent material
incorporated into filters; in one such SPE filter, Empore by 3M, the sorbent
is integrated into polytetrafluorethylene (PTFE) fibrils and accounts for
&gt; 90 % of the filter mass (Erger and Schmidt, 2014). Although
SPE filters have been designed and primarily utilized for extraction of
organic compounds from aqueous samples (e.g., Erger and Schmidt, 2014, and
references therein), a few studies have demonstrated their efficacy for air
sampling (Sanchez et al., 2003; Stuff et al., 1999; Tollback et al., 2006).
In each of these studies, researchers simultaneously collected both gas and
particle phases onto the SPE filter for targeted analysis of a specific class
of compounds, including organophosphate esters (Tollback et al., 2006),
nitroaromatic compounds (Sanchez et al., 2003), and chemical warfare agents
(Stuff et al., 1999).</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1" specific-use="star"><caption><p id="d1e182">Summary of sampled fires.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="4">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:thead>
       <oasis:row>
         <oasis:entry colname="col1">Fire number</oasis:entry>
         <oasis:entry colname="col2">Fuel type</oasis:entry>
         <oasis:entry colname="col3">MCE<inline-formula><mml:math id="M3" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msup></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col4">No. of compounds</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2"/>
         <oasis:entry colname="col3"/>
         <oasis:entry colname="col4">Total (SPE, PTFE, both)</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">02</oasis:entry>
         <oasis:entry colname="col2">Ponderosa pine</oasis:entry>
         <oasis:entry colname="col3">0.931</oasis:entry>
         <oasis:entry colname="col4">256 (157, 74, 25)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">16</oasis:entry>
         <oasis:entry colname="col2">Ponderosa pine, litter</oasis:entry>
         <oasis:entry colname="col3">0.954</oasis:entry>
         <oasis:entry colname="col4">503 (191, 255, 57)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">22</oasis:entry>
         <oasis:entry colname="col2">Douglas fir, litter</oasis:entry>
         <oasis:entry colname="col3">0.945</oasis:entry>
         <oasis:entry colname="col4">376 (221, 128, 27)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">28</oasis:entry>
         <oasis:entry colname="col2">Manzanita, canopy</oasis:entry>
         <oasis:entry colname="col3">0.963</oasis:entry>
         <oasis:entry colname="col4">357 (152, 155, 50)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">31</oasis:entry>
         <oasis:entry colname="col2">Douglas fir, rotten log</oasis:entry>
         <oasis:entry colname="col3">0.781</oasis:entry>
         <oasis:entry colname="col4">722 (269, 270, 183)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">36</oasis:entry>
         <oasis:entry colname="col2">Engelmann spruce, duff</oasis:entry>
         <oasis:entry colname="col3">0.871</oasis:entry>
         <oasis:entry colname="col4">470 (280, 142, 48)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">37</oasis:entry>
         <oasis:entry colname="col2">Ponderosa pine</oasis:entry>
         <oasis:entry colname="col3">0.940</oasis:entry>
         <oasis:entry colname="col4">733 (299, 354, 80)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">42</oasis:entry>
         <oasis:entry colname="col2">Lodgepole pine</oasis:entry>
         <oasis:entry colname="col3">0.951</oasis:entry>
         <oasis:entry colname="col4">482 (257, 175, 50)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">47</oasis:entry>
         <oasis:entry colname="col2">Subalpine fir</oasis:entry>
         <oasis:entry colname="col3">0.932</oasis:entry>
         <oasis:entry colname="col4">630 (311, 253, 66)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">49</oasis:entry>
         <oasis:entry colname="col2">Excelsior</oasis:entry>
         <oasis:entry colname="col3">0.971</oasis:entry>
         <oasis:entry colname="col4">141 (84, 46, 11)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">50</oasis:entry>
         <oasis:entry colname="col2">Yak dung</oasis:entry>
         <oasis:entry colname="col3">0.899</oasis:entry>
         <oasis:entry colname="col4">881 (378, 360, 143)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">52</oasis:entry>
         <oasis:entry colname="col2">Engelmann spruce</oasis:entry>
         <oasis:entry colname="col3">0.957</oasis:entry>
         <oasis:entry colname="col4">597 (357, 194, 46)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">55</oasis:entry>
         <oasis:entry colname="col2">Indonesian peat</oasis:entry>
         <oasis:entry colname="col3">0.831</oasis:entry>
         <oasis:entry colname="col4">547 (94, 402, 51)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">56</oasis:entry>
         <oasis:entry colname="col2">Subalpine fir, duff</oasis:entry>
         <oasis:entry colname="col3">0.886</oasis:entry>
         <oasis:entry colname="col4">683 (232, 280, 171)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">60</oasis:entry>
         <oasis:entry colname="col2">Rice straw</oasis:entry>
         <oasis:entry colname="col3">0.953</oasis:entry>
         <oasis:entry colname="col4">190 (146, 30, 14)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">62</oasis:entry>
         <oasis:entry colname="col2">Bear grass</oasis:entry>
         <oasis:entry colname="col3">0.897</oasis:entry>
         <oasis:entry colname="col4">518 (307, 154, 57)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">65</oasis:entry>
         <oasis:entry colname="col2">Jeffrey pine, duff</oasis:entry>
         <oasis:entry colname="col3">0.877</oasis:entry>
         <oasis:entry colname="col4">449 (215, 182, 52)</oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">66</oasis:entry>
         <oasis:entry colname="col2">Sagebrush</oasis:entry>
         <oasis:entry colname="col3">0.919</oasis:entry>
         <oasis:entry colname="col4">317 (183, 113, 21)</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table><table-wrap-foot><p id="d1e185"><inline-formula><mml:math id="M2" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msup></mml:math></inline-formula> MCE values from Table S1 of Selimovic et al. (2018).</p></table-wrap-foot></table-wrap>

      <p id="d1e525">In this work, samples of biomass-burning smoke were collected onto tandem
Teflon and SPE filters during the 2016 FIREX (Fire Influence on Regional and
Global Environments Experiment) campaign at the US Forest Service Fire
Sciences Laboratory (FSL). Two-dimensional gas chromatography with
time-of-flight mass spectrometry (GC <inline-formula><mml:math id="M4" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS) was used to analyze
the I/SVOCs emitted during biomass burning and collected onto the filters.
Leveraging the enhanced speciation capability of GC <inline-formula><mml:math id="M5" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS, the
goals of this work were 3-fold: (1) demonstrate the potential of SPE filters
for the untargeted analysis of compounds with a wide range of volatilities;
(2) qualitatively investigate the diversity of I/SVOCs emitted from biomass
burning across a range of fuel types; and (3) assess the accuracy of
phase-separated SPE measurements to predict gas-particle partitioning of
specific compounds emitted from fires.</p>
</sec>
<sec id="Ch1.S2">
  <title>Materials and methods</title>
<sec id="Ch1.S2.SS1">
  <title>Laboratory fires and sample collection</title>
      <?pagebreak page17803?><p id="d1e553">Selimovic et al. (2018) provided details of the FIREX laboratory
experiment, including the fuels burned. The fire samples analyzed in this
work are listed in Table 1. Composite fires were constructed to recreate the
relevant ecosystem, including fuel components such as duff, litter, wood
debris (e.g., twigs), and canopy; these fires are listed as the ecosystem
without further designation (e.g., Engelmann spruce). Individual fuel
components were also burned separately, as noted in Table 1 (e.g., Engelmann
spruce duff). Also included in Table 1 are the reported modified combustion
efficiencies (MCEs) (Selimovic et al., 2018), defined as fire-integrated
<inline-formula><mml:math id="M6" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">CO</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow><mml:mo>/</mml:mo><mml:mo>(</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">CO</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow><mml:mo>+</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi></mml:mrow></mml:math></inline-formula>CO), where <inline-formula><mml:math id="M7" display="inline"><mml:mi mathvariant="normal">Δ</mml:mi></mml:math></inline-formula>
indicates background-corrected mixing ratios (Yokelson et
al., 1996). MCE provides a measure of the relative contributions of flaming
and smoldering combustion, with values approaching 1 indicative of
predominantly flaming combustion, values <inline-formula><mml:math id="M8" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.8</mml:mn></mml:mrow></mml:math></inline-formula> predominantly
smoldering, and 0.9 an even mix of both flaming and smoldering (Akagi et
al., 2011).</p>
      <p id="d1e603">The FSL has been described in detail by Christian et al. (2004). Briefly,
fires were burned beneath a 1.6 m diameter stack with an inverted funnel
located above the fuel bed. The combustion chamber is pressurized and vented
through the top of the stack to completely entrain the smoke and carry it to
the measurement platform 17 m above the floor. Previous measurements have
shown the smoke to be well mixed at platform height (Christian et al.,
2004). To collect filter samples, a passivated (Inertium<sup>®</sup>,
AMCX, PA) stainless steel tube (1.27 cm o.d., 20.3 cm long) was passed
through the stack wall and into the well-mixed smoke. At the outlet of the
tube, one PTFE and one SPE filter were placed in series within a single 47 mm Teflon filter holder such that the PTFE filter was contacted first by the
sample stream. The SPE filters (47 mm Empore C18 bonded silica, 3M) were
pre-cleaned prior to the campaign in a Büchner funnel with <inline-formula><mml:math id="M9" display="inline"><mml:mrow><mml:mn mathvariant="normal">2</mml:mn><mml:mo>×</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> mL washes of acetone followed by methanol (Tollback et al., 2006). The
PTFE filters (47 mm, 1.2 <inline-formula><mml:math id="M10" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>m pore size, Cole-Parmer) were used without
pretreatment. Smoke was pulled through the filters at 10 L min<inline-formula><mml:math id="M11" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for the
duration of each fire (7–41 min). Samples were collected from 18 fires that
burned a range of fuel types (Table 1). Three background samples were also
collected from the stack over 30–40 min, in addition to two blanks for each
filter type. Samples were stored in foil packets in a freezer until
extraction approximately 3 months following collection.</p>
</sec>
<sec id="Ch1.S2.SS2">
  <title>Sample extraction and analysis</title>
      <p id="d1e646">SPE and PTFE filters were identically extracted at the Environmental and
Molecular Sciences Laboratory of Pacific Northwest National Laboratory. The
filters were inserted into glass vials and extracted in 7 mL of methanol
(HPLC grade) under sonication for 1 h. The extracts were transferred to new
vials and then dried under ultra-pure nitrogen. The dried extracts were
reconstituted in 1.2 mL of methanol, followed by centrifugation at 6500 rcf
for 5 min to separate the SPE-filter residue; 0.7 mL of each extract was
allocated for GC <inline-formula><mml:math id="M12" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS analysis. These aliquots were stored at
<inline-formula><mml:math id="M13" display="inline"><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">80</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M14" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for approximately 1 month followed by storage at
<inline-formula><mml:math id="M15" display="inline"><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">18</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M16" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for up to 1.5 weeks until derivatization and analysis were
completed at the University of California-Riverside. For derivatization, each
aliquot was dried completely under nitrogen to avoid reaction between the
solvent and derivatizing agent. Trimethylsilylation derivatization was
achieved by adding 100 <inline-formula><mml:math id="M17" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>L of BSTFA (N,O-Bis(trimethylsilyl)
trifluoroacetamide) and 50 <inline-formula><mml:math id="M18" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>L of anhydrous pyridine to each residue
followed by heating at 70 <inline-formula><mml:math id="M19" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C under mixing at 1200 rpm for 1 h.
During incubation, faulty vial caps caused volatilization losses (<inline-formula><mml:math id="M20" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> %–33 %) for a few samples; affected samples are listed in
Table S1 in the Supplement. It is assumed that only derivatization agent
evaporated, resulting in more concentrated samples. The data for impacted
samples were scaled according to the estimated<?pagebreak page17804?> volume loss (Table S1). All
samples were analyzed within <inline-formula><mml:math id="M21" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">40</mml:mn></mml:mrow></mml:math></inline-formula> h of derivatization.</p>
      <p id="d1e738">Derivatized extracts were analyzed on a Pegasus 4D GC <inline-formula><mml:math id="M22" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS
(Leco Corp., St. Joseph, MI) equipped with an autosampler (Agilent 7683);
1 <inline-formula><mml:math id="M23" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>L of each extract was injected in splitless mode at
250 <inline-formula><mml:math id="M24" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C. GC <inline-formula><mml:math id="M25" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC separations were performed with reversed
polarity, i.e., using a mid-polarity primary column (Rxi-17SilMS, 30 m,
0.25 mm i.d., 0.25 mm film thickness, Restek, Bellefonte, PA) and a
non-polar secondary column (Rxi-1MS, 1.1 m, 0.15 mm i.d., 0.15 mm film
thickness, Restek, Bellefonte, PA). The primary oven was held at an initial
temperature of 50 <inline-formula><mml:math id="M26" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for 0.2 min, followed by a
3 <inline-formula><mml:math id="M27" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C min<inline-formula><mml:math id="M28" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> ramp to 305 <inline-formula><mml:math id="M29" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C,
with a final hold of 1 min. The secondary oven (modulator) was held at
<inline-formula><mml:math id="M30" display="inline"><mml:mrow><mml:mo>+</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M31" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C (<inline-formula><mml:math id="M32" display="inline"><mml:mrow><mml:mo>+</mml:mo><mml:mn mathvariant="normal">25</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M33" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C) relative to the primary oven. The
modulation period was 5 s. The transfer line was maintained at
250 <inline-formula><mml:math id="M34" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C. The ion source temperature was 225 <inline-formula><mml:math id="M35" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C; the mass
spectrometer acquired at 200 Hz. A 450 s solvent delay was used.</p>
</sec>
<sec id="Ch1.S2.SS3">
  <title>Data analysis</title>
      <p id="d1e874">GC <inline-formula><mml:math id="M36" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS raw files were processed using Chromatof (Leco Corp.,
St. Joseph, MI). Background correction was performed separately on the PTFE
and SPE filters. Within each filter group, the maximum peak area of each
peak observed across the full set of corresponding blank and background
samples was multiplied by 2 to ensure that all artifact peaks arising from
the extraction and derivatization procedures would be entirely removed.
Those adjusted values were subsequently used to background correct all
associated peaks in the corresponding fire samples; only 16 (PTFE) and 32
(SPE) peaks in the fire samples required background correction. Data were
retained for analyte peaks with <inline-formula><mml:math id="M37" display="inline"><mml:mrow><mml:mi>S</mml:mi><mml:mo>/</mml:mo><mml:mi>N</mml:mi></mml:mrow></mml:math></inline-formula> &gt; 200 and background-corrected
peak area &gt; 100 000 A.U. To further avoid potentially spurious or
insignificant peaks, any remaining compounds present in only one sample
(PTFE or SPE) were omitted from further analysis unless its peak area
accounted for &gt; 0.1 % of the total peak area for that sample
(out of <inline-formula><mml:math id="M38" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1100</mml:mn></mml:mrow></mml:math></inline-formula> singly observed peaks, <inline-formula><mml:math id="M39" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">120</mml:mn></mml:mrow></mml:math></inline-formula> were
retained). Peaks corresponding to standard compounds (see Sect. 2.4) were
considered positively identified. For other peaks, a compound name was
assigned and considered tentatively identified if the match similarity with
the NIST library hit was &gt; 800 in any sample that contained that
peak and the identified structure was consistent with the derivatization
approach used here (i.e., contained trimethylsilyl groups where applicable).
Worton et al. (2017) have recently demonstrated that the
probability of an incorrect NIST library match is <inline-formula><mml:math id="M40" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">30</mml:mn></mml:mrow></mml:math></inline-formula> % for
matches between 800–900 and 14 % for matches &gt; 900.</p><?xmltex \hack{\newpage}?>
</sec>
<sec id="Ch1.S2.SS4">
  <title>Extraction efficiency tests</title>
      <p id="d1e933">Potential biases in the SPE extractions, which would affect comparisons of
measured compounds between the PTFE and SPE filters, were tested using a
range of standard compounds relevant to biomass-burning emissions, including
phenol derivatives, levoglucosan, <inline-formula><mml:math id="M41" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>-alkanes, <inline-formula><mml:math id="M42" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>-alkanoic acids, and PAHs.
Three tests were performed using equivalent volumes of the standard mixture:
(1) a control where the standard was derivatized without going through the
extraction procedure (hereafter called “standard”); (2) standard was spiked
into 7 mL of methanol (HPLC grade) as a proxy for the PTFE extractions
(hereafter called “PTFE test”); and (3) the standard was spiked onto SPE
filters, briefly allowed to dry, and then extracted in 7 mL of methanol
(hereafter called “SPE test”). Regarding the PTFE test, standards were not
spiked directly onto a PTFE filter due to the potential for rapid evaporation
of the relatively volatile standard constituents (Dhammapala et al., 2007);
this approach assumes no recovery biases are introduced by the PTFE filter.
The PTFE and SPE tests were performed in triplicate; the standard test was
performed in duplicate. For the PTFE and SPE tests, the extraction and
derivatization procedures were similar to that described above for the FSL
samples with the main differences being that the extracts were filtered using
PTFE-coated syringe filters (Titan3, Thermo-Scientific) rather than
centrifugation, and MSTFA (<inline-formula><mml:math id="M43" display="inline"><mml:mi>N</mml:mi></mml:math></inline-formula>-methyl-<inline-formula><mml:math id="M44" display="inline"><mml:mi>N</mml:mi></mml:math></inline-formula>-(trimethylsilyl)trifluoroacetamide with 1 %
trimethylchlorosilane) was used as the derivatizing agent rather than BSTFA.
Standards derivatized with MSTFA showed no significant differences from those
derivatized with BSTFA. GC <inline-formula><mml:math id="M45" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS analysis was performed as
described above. Additional standards (similar to those used in Hatch et al.,
2015) were derivatized and analyzed for identification purposes only.</p>
</sec>
</sec>
<sec id="Ch1.S3">
  <title>Results and discussion</title>
<sec id="Ch1.S3.SS1">
  <title>Extraction efficiency</title>
      <p id="d1e983">Because SPE filters have not reportedly been used for untargeted analysis of
air samples, the extraction efficiency was assessed for a range of standard
compounds with regard to both absolute recovery and potential biases compared
to extraction from PTFE filters. The recoveries of standard compounds from
SPE and PTFE filters are shown in Fig. 1a for compounds relevant to the SPE
fire samples described below, namely standards eluting at or before 3000 s
(see Fig. 2 for comparison); data for all individual standard compounds
tested are shown and discussed in the Supplement (Figs. S1–S5). Most
compounds displayed high recovery (<inline-formula><mml:math id="M46" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.8</mml:mn></mml:mrow></mml:math></inline-formula>–1.1) in the PTFE test
(Figs. S1–S5). Exceptions were observed for the most volatile standard
compounds within each compound class (Figs. S1–S5). The compounds with the
poorest<?pagebreak page17805?> observed recovery (&lt; 0.2) included naphthalene, undecane,
dodecane, and tridecane and showed no obvious bias between the SPE and PTFE
tests (Figs. 1a, S2, and S2), indicating that these compounds are too
volatile to survive the extraction procedure regardless of filter type and
likely volatilized during the drying periods. Matrix effects likely also
contributed to the very poor recovery of these volatile non-polar
hydrocarbons, due to the high concentration of highly polar, oxygenated
compounds present in the standard matrix (further discussed in the
Supplement). Thus, these four compounds were omitted from further analysis.
However, there is no clear relationship between the poor recovery of these
four compounds and oxygenated compounds that elute in the same primary
retention time window. For example, heptanoic acid displayed significantly
better recovery in the PTFE test (<inline-formula><mml:math id="M47" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.86</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.06</mml:mn></mml:mrow></mml:math></inline-formula>, Fig. S4) than tridecane
(<inline-formula><mml:math id="M48" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.14</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.07</mml:mn></mml:mrow></mml:math></inline-formula>, Fig. S1) despite eluting significantly earlier (1045 s vs.
1190 s). As a result, the poor recovery of the volatile alkanes/naphthalene
was not extrapolated to other relatively polar oxygenated compounds present
at similar retention times in the fire samples.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1"><caption><p id="d1e1022"><bold>(a)</bold> Comparison of the extraction recoveries of standard compounds
in the SPE and PTFE tests. For the linear regression, <inline-formula><mml:math id="M49" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.72</mml:mn></mml:mrow></mml:math></inline-formula> and
slope <inline-formula><mml:math id="M50" display="inline"><mml:mrow><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.75</mml:mn></mml:mrow></mml:math></inline-formula>. <bold>(b)</bold> SPE extraction bias as a function of compound class.</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f01.png"/>

        </fig>

      <p id="d1e1061">Linearity with a correlation coefficient (<inline-formula><mml:math id="M51" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> of 0.72 was observed
between the SPE tests and PTFE tests (Fig. 1a); however, there is clearly a
negative bias in the extraction from SPE filters compared to the PTFE tests,
with a slope of <inline-formula><mml:math id="M52" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.75</mml:mn></mml:mrow></mml:math></inline-formula>. This is partly due to retention of <inline-formula><mml:math id="M53" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">0.5</mml:mn></mml:mrow></mml:math></inline-formula> mL (<inline-formula><mml:math id="M54" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">7</mml:mn></mml:mrow></mml:math></inline-formula> % of the total volume) of the extraction solvent by
the SPE filters; thus 100 % recovery from SPE filters cannot be achieved.
Such bias could be corrected in future work through application of recovery
standards. The general under-recovery of analytes from the SPE filter is
likely also due in part to incomplete solvation of analytes from the sorbent
material.</p>
      <p id="d1e1107">The biases between the SPE and PTFE tests are further shown as a function of
compound class in Fig. 1b. Included in the box plot are all data that were
used to determine scaling factors to facilitate comparison of the SPE and
PTFE extracts, namely compounds eluting before 3000 s and with PTFE-derived
extraction efficiency &gt; 0.15. For all compound classes, the
recovery from SPE filters was lower than in the PTFE tests; however,
differences were observed between hydrocarbons and oxygenated compounds. The
median recovery for oxygenated compounds was <inline-formula><mml:math id="M55" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">75</mml:mn></mml:mrow></mml:math></inline-formula> % that of the PTFE
tests and was fairly consistent across different oxygenated classifications
(0.74 for phenols, 0.75 for alkanoic acids, and 0.79 for miscellaneous
oxygenates, Fig. 1b). Two outliers, palmitic acid and stearic acid, with
recoveries &gt; 1 were observed for the alkanoic acid class
(Figs. 1a, S4). These two compounds were observed in all biomass-burning
sample blanks/backgrounds and are likely an artifact of the
extraction/derivatization procedure. The largest SPE bias among all compounds
tested was observed for maltol, for which the recovery in the PTFE test was
<inline-formula><mml:math id="M56" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.75</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.04</mml:mn></mml:mrow></mml:math></inline-formula>, but only <inline-formula><mml:math id="M57" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.15</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.01</mml:mn></mml:mrow></mml:math></inline-formula> in the SPE test (Fig. S5). A repeat
test was performed with a fresh maltol solution and resulted in similarly low
recovery from SPE filters. The reason for this large SPE bias for maltol is
currently unknown.</p>
      <p id="d1e1145">5-Hydroxy methyl furfural (HMF) displayed poor recovery in both tests (<inline-formula><mml:math id="M58" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.03</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.007</mml:mn></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M59" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.09</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.1</mml:mn></mml:mrow></mml:math></inline-formula> for the PTFE and SPE tests, respectively,
Fig. S5) and can be attributed to reaction of HMF during extraction, as the
same reaction product (based on comparison of the mass spectra) was observed
in the composite standard and a repeat test using a fresh HMF standard
solution. HMF was the only standard compound to form an obvious reaction
product during extraction; reactions of other aldehydes (e.g., vanillin)
during extraction were negligible (see Supplement). The methyl ester of HMF
was also present in the composite standard solution due to reaction with
methanol solvent during storage of the standard and showed significantly
improved recovery compared to the aldehyde (<inline-formula><mml:math id="M60" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.80</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.08</mml:mn></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M61" display="inline"><mml:mrow><mml:mn mathvariant="normal">0.56</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.05</mml:mn></mml:mrow></mml:math></inline-formula> in the PTFE and SPE tests, respectively, Fig. S5). Because other
artifacts resulting from methanol extraction have been previously observed
(Sauret-Szezepanki and Lane, 2004), further characterization of
methanol-extraction-related artifacts and/or further optimization of the
extraction solvent may be needed for studies seeking to accurately
identify/quantify certain compounds. However, given the consistency of the
observed HMF reactions, potential solvent–analyte interactions likely did
not substantially impact the observed<?pagebreak page17806?> differences in the chromatographic
profiles of the biomass-burning samples discussed below.</p>
      <p id="d1e1196">Alkanes and PAHs were under-recovered by <inline-formula><mml:math id="M62" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">50</mml:mn></mml:mrow></mml:math></inline-formula> % in the SPE
test compared to the PTFE test (Fig. 1b). It is possible that hydrocarbons
were more strongly bound to the non-polar octadecane-based sorbent material
than more polar compounds resulting in lower recovery. Other solvents (e.g.,
hexane) and/or solvent mixtures could be tested in future work to improve
the recovery of hydrocarbons from SPE filters. Octadecane displayed a large
positive bias in the SPE tests (SPE/PTFE <inline-formula><mml:math id="M63" display="inline"><mml:mrow><mml:mo>=</mml:mo><mml:mn mathvariant="normal">2.0</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.6</mml:mn></mml:mrow></mml:math></inline-formula>, Fig. S1),
likely due to degradation of the SPE sorbent material during extraction.
Octadecane data have been omitted from Fig. 1, as well as all FIREX
SPE-filter data discussed below.</p>
      <p id="d1e1223">These results demonstrate that the recovery of compounds from SPE filters is
satisfactory for qualitative assessment of the compounds measured in the
biomass-burning samples. Further method optimization (e.g., use of recovery,
internal, and external standards) would be necessary for quantification.
Characterization of the recoveries and matrix effects for more standards
would also be necessary to adequately correct the recoveries for the wide
range of compounds observed in untargeted analysis of biomass-burning smoke
(including many unknown compounds), especially the most volatile observed
compounds. As the interest at this stage is in assessing the full diversity
of I/SVOCs in smoke and demonstrating the range of compounds collected by
SPE filters, all observed compounds (except those explicitly noted above)
were retained without correction for recovery. However, corrections have
been made for the observed biases between the SPE and PTFE filters. Based on
Fig. 1b, the peak areas for all known hydrocarbons detected in the FIREX
SPE samples (alkanes, alkenes, and PAHs) were scaled <inline-formula><mml:math id="M64" display="inline"><mml:mrow><mml:mn mathvariant="normal">2</mml:mn><mml:mo>×</mml:mo></mml:mrow></mml:math></inline-formula> and the
remaining compounds (largely oxygenates) were scaled <inline-formula><mml:math id="M65" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.33</mml:mn><mml:mo>×</mml:mo></mml:mrow></mml:math></inline-formula>.
Further, the relative standard deviation (RSD) for each compound was
conservatively estimated to be approximately 100 % based on the maximum
determined RSDs in the recovery tests (80 % and 64 % for the PTFE and
SPE tests, respectively, not including the five omitted compounds mentioned
above). This approach should account for much of the variability in analyte
recovery during extraction and derivatization (see Supplement); however, it should
be noted that on average the RSDs for most standard compounds were much
lower than the maximum, with median RSDs of 8 % and 12 % for the PTFE
and SPE tests, respectively.</p>
</sec>
<sec id="Ch1.S3.SS2">
  <title>Biomass-burning samples</title>
      <p id="d1e1252">Figure 2 shows a comparison of composite SPE and PTFE chromatograms wherein
peaks from all SPE and all PTFE samples are represented (GasPedal, Decodon
Gmbh, Greifswald, Germany) (Schmarr and Bernhardt, 2010); chromatograms from
individual fires are also included in the Supplement (Figs. S7–S24). The
compounds observed on the SPE filters (shown in orange) are generally earlier
eluting than the compounds observed on the PTFE filters (shown in blue). The
vast majority (<inline-formula><mml:math id="M66" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">97</mml:mn></mml:mrow></mml:math></inline-formula> %) of compounds observed in the SPE filters
correspond to first-dimension Kovats retention indices (RIs) in the range of
<inline-formula><mml:math id="M67" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1200</mml:mn></mml:mrow></mml:math></inline-formula>–2100 (although even earlier eluting compounds were observed in
the SPE samples, we restrict the analysis to only compounds eluting after
930 s, equivalent to an RI of 1200, Fig. 2). The mean primary retention time
of analytes on the SPE filters is <inline-formula><mml:math id="M68" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1800</mml:mn></mml:mrow></mml:math></inline-formula> s (RI 1550) compared to <inline-formula><mml:math id="M69" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">2600</mml:mn></mml:mrow></mml:math></inline-formula> s (RI 1915) for the compounds eluting in the PTFE filter extracts.
Although retention time is not a perfect indicator of volatility differences
here, due to derivatization as well as variable activity of diverse analytes
in the column stationary phase, these observations suggest that the compounds
detected on the SPE filters were on average more volatile than those
collected on the PTFE filters, which is consistent with particles being first
trapped on the PTFE filter followed by gases (or desorbed POA) being
collected on the SPE filter. As indicated by the Venn diagram inset of
Fig. 2, the majority of the compounds were found on only one filter type –
across all samples, 543 and 581 compounds were detected solely on the SPE and
PTFE filters, respectively. Because all standard compounds tested on the SPE
filters could be observed to some degree (Figs. S1–S5), it is unlikely that
SPE-related extraction bias was the cause of the different compounds observed
solely on one filter type. Compounds present in both phases were detected
(shown in black, Fig. 2); 364 compounds were found on at least one SPE and
one PTFE filter sample. The numbers of compounds observed on each filter type
for the individual fires are listed in Table 1.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2"><caption><p id="d1e1297">Overlay of composite chromatograms for all SPE and all PTFE smoke
samples. Inset shows the number of peaks observed on each filter type.</p></caption>
          <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f02.png"/>

        </fig>

      <p id="d1e1306">The earliest eluting, positively identified compounds in the SPE-filter data
correspond to benzonitrile, and <inline-formula><mml:math id="M70" display="inline"><mml:mi>o</mml:mi></mml:math></inline-formula>-, <inline-formula><mml:math id="M71" display="inline"><mml:mi>m</mml:mi></mml:math></inline-formula>-, and <inline-formula><mml:math id="M72" display="inline"><mml:mi>p</mml:mi></mml:math></inline-formula>-cresol. Potential breakthrough of
such volatile compounds through the SPE filter was probed by collecting
smoke samples from a campfire-style burn in Riverside, CA onto<?pagebreak page17807?> a
PTFE-SPE-SPE sampling train. Any compounds present on the backup SPE filter
were below detection limit despite very high concentrations observed on the
front SPE filter, consistent with the negligible breakthrough observed in
previous studies using sorbent-impregnated filters
(Galarneau et al., 2006) and SPE filters (Tollback et
al., 2006). These observations demonstrate the ability of SPE filters to
trap relatively volatile compounds, although more work is needed to optimize
the recovery and quantification of such compounds. For example, other
non-protic solvents could be tested to enable derivatization without the
need to completely dry the samples, which would help to minimize
volatilization losses. Other positively and tentatively identified compounds
observed from the FIREX SPE samples are largely consistent with compounds
reported from PUF/XAD measurements (Hays et al., 2002; Mazzoleni et al.,
2007; Schauer et al., 2001), including phenol derivatives (e.g., dimethyl
phenols, guaiacols, benzenediols, vanillin, isoeugenol, acetovanillone),
mono-carboxylic acids, dicarboxylic acids (e.g., methyl maleic acid),
<inline-formula><mml:math id="M73" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>-alkanes, and PAHs (e.g., fluorene, phenanthrene). With high trapping
efficiency and similar observable compound classes, SPE filters appear to be
a suitable alternative to PUF/XAD measurements for untargeted analysis of
I/SVOCs in air samples. Because many of the identifiable compounds in the
FIREX samples have been reported and quantified in previous studies (Hays
et al., 2002; Mazzoleni et al., 2007; Schauer et al., 2001), the focus here
is on investigating the diversity of emissions rather than providing
detailed speciation profiles.</p>
      <p id="d1e1337">Hereafter, the relative abundance (or % abundance) of a given compound is
defined as the ratio of the peak area for compound <inline-formula><mml:math id="M74" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula> to the total observed
peak area (using deconvoluted total ion current, DTIC) summed over all
compounds present in either the corresponding SPE sample only or the
combined SPE <inline-formula><mml:math id="M75" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> PTFE samples (each case is explicitly noted where
applicable). The peak area fractions are used as an indication rather than
an absolute measure of the % abundance because the individual compounds
have not been corrected for recovery or differences in instrument response.
This approach is reasonable for the qualitative assessment sought here
because many of the most volatile compounds were still observed with high
relative abundance. For example, cresols likely exhibited poorer recovery
(&lt; 0.3) than guaiacol (Fig. S3) due to their higher volatilities,
yet were still among the most abundant of the observed compounds. However,
the relative abundance for volatile compounds should be considered a lower
limit.</p>
      <p id="d1e1355">Figure 3 illustrates the number of SPE samples in which each compound was
observed along with its median % abundance across the relevant set of
samples (i.e., 0 % abundance values were ignored); for two or fewer
samples, the maximum observed % abundance was used. Of the 907 total
compounds observed across all 18 SPE samples, approximately half (452) were
detected in 3 or fewer samples, demonstrating the abundance of unique
compounds. In contrast, only 31 compounds were observed in all 18 samples;
these ubiquitous compounds were also generally the most abundant. The red
trace in Fig. 3 denotes the median of the median % abundance values within
each bin and demonstrates a general trend of increasing average relative
abundance with increasing detection frequency. On average, the most
ubiquitous compounds (<inline-formula><mml:math id="M76" display="inline"><mml:mrow><mml:mi>N</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">18</mml:mn></mml:mrow></mml:math></inline-formula>) account for <inline-formula><mml:math id="M77" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">10</mml:mn><mml:mo>×</mml:mo></mml:mrow></mml:math></inline-formula> greater %
abundance than compounds observed in 13 or fewer samples. These highly
abundant (median relative abundance &gt; 1 %), ubiquitous
compounds include phenol derivatives (<inline-formula><mml:math id="M78" display="inline"><mml:mi>o</mml:mi></mml:math></inline-formula>-, <inline-formula><mml:math id="M79" display="inline"><mml:mi>m</mml:mi></mml:math></inline-formula>-, and <inline-formula><mml:math id="M80" display="inline"><mml:mi>p</mml:mi></mml:math></inline-formula>-cresols, guaiacol,
methyl guaiacol, hydroquinone, 3- and 4-methyl catechol), methyl maleic acid,
and several unknowns. Only catechol accounted for &gt; 1 % of
the total SPE peak area in all 18 samples, ranging from 4.9 % (dung) to
15 % (ponderosa pine, burn 37) and was therefore the most universally
abundant I/SVOC detected in the gas phase. Several highly abundant compounds
were also present in one to seven samples (Fig. 3). For example, camphor was
only detected in sagebrush smoke, at 4.3 % of the total SPE peak area; a
unique camphor signature was also observed during FIREX (Sekimoto et al.,
2018). Two other highly abundant compounds were present in only one sample;
these are unknown compounds (but likely alcohols or organic acids based on
mass spectral fragmentation patterns discussed below) and accounted for
1.1 % and 2.3 % abundance in sagebrush and peat smoke, respectively.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3"><caption><p id="d1e1405">The black circles represent the median percentage (ignoring zeros)
of the total SPE peak area for each observed compound as a function of the
number of SPE samples that contained that compound; for compounds observed
in only one or two samples, the maximum percent abundance was used in place
of the median. Marker size is proportional to the range of percent
abundances observed for each compound (capped at 50), calculated as the
ratio of the maximum value to the minimum non-zero value. The red trace
represents the median of the values shown for each number of samples, with
the marker sizes corresponding to the median max <inline-formula><mml:math id="M81" display="inline"><mml:mo>/</mml:mo></mml:math></inline-formula> min ratio. The numbers
along the top represent the number of compounds observed within each bin.</p></caption>
          <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f03.png"/>

        </fig>

      <p id="d1e1421">Large variability is evident in the % abundances of a given compound
across the SPE samples, as indicated by<?pagebreak page17808?> the marker sizes in Fig. 3, which
represent the ratio of the maximum observed value to the minimum observed
non-zero value (ratios greater than <inline-formula><mml:math id="M82" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:math></inline-formula> are unlikely to be due
entirely to experimental artifacts). Ratios as high as 150 were observed
(values in Fig. 3 have been capped at 50 for visual clarity),
demonstrating the potential for high variability in the fraction of smoke
accounted for by individual I/SVOCs. For example, there is wide variability
in the relative abundances for many of the most ubiquitous compounds, with
35 % displaying max <inline-formula><mml:math id="M83" display="inline"><mml:mo>/</mml:mo></mml:math></inline-formula> min ratios &gt; 25 and a median ratio of 15.
Although there is an apparent trend of increasing median variability (red
marker sizes in Fig. 3) with increasing detection frequency, this is
likely due in part to the higher relative abundance of more ubiquitous
compounds. The variability of less frequently observed and generally less
concentrated compounds was potentially truncated by the method detection
limit and peak selection criteria (Sect. 2.3). This hypothesis is somewhat
supported by the observation that the variability tends to be higher for the
more abundant compounds within bins 2–7.</p>
      <p id="d1e1441">To explore the overall diversity of the speciated emissions among the smoke
samples, correlation coefficients were calculated based on the combined
(SPE <inline-formula><mml:math id="M84" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> PTFE) % abundances of all individual observed compounds
between pairs of fires (Fig. 4a, <inline-formula><mml:math id="M85" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>, lower half;
correlation coefficients were calculated using Microsoft Excel and the image
plot was generated using Igor Pro v.6.37). For illustration, example
correlation plots for highly and poorly correlated fire pairs are included in
Fig. 4b and c, respectively. Because levoglucosan was by far the most
abundant compound in all burns except manzanita, accounting for between
7.6 % and 43 % of the total abundances (e.g., Fig. 4b, c), this
single compound had a large effect on the regression parameters. Therefore,
the correlation coefficients calculated with the levoglucosan data omitted
(<inline-formula><mml:math id="M86" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>) are shown in the upper half of Fig. 4a. This
allows a better comparison of the less abundant compound signatures. For
nearly all sample pairs, the <inline-formula><mml:math id="M87" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> values dropped significantly after
removing levoglucosan (Fig. 4a), with mean <inline-formula><mml:math id="M88" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> of 0.67
compared to mean <inline-formula><mml:math id="M89" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> of 0.33.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4"><caption><p id="d1e1517"><bold>(a)</bold> Correlation coefficients (<inline-formula><mml:math id="M90" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula>) for each fire pair
based on the total (SPE <inline-formula><mml:math id="M91" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> PTFE) % abundance for each observed
compound. For the ponderosa pine replicates, the fire number is indicated.
Regression values below the diagonal were calculated including all observed
compounds; above the diagonal, levoglucosan was omitted. The white box bounds
the conifer fires. <bold>(b)</bold> Example scatter plot of a highly correlated
fire pair. <bold>(c)</bold> Example scatter plot of a poorly correlated fire
pair. In <bold>(b)</bold> and <bold>(c)</bold>, each point represents a single
compound and the shaded areas denote a factor of 2 from the <inline-formula><mml:math id="M92" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>:</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> line.</p></caption>
          <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f04.png"/>

        </fig>

      <p id="d1e1572">The highest correlations were observed among the coniferous fuels (bounded
by the white box in Fig. 4a). Among conifers, the mean
<inline-formula><mml:math id="M93" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> is 0.91 and mean <inline-formula><mml:math id="M94" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> is
0.62, both of which are significantly higher than the overall mean values
reported above. Selimovic et al. (2018) also observed similarities among
the VOC emissions from coniferous fuels. The conifer emissions were well
correlated with conifer-derived decayed plant matter (rotten log and duffs)
with mean <inline-formula><mml:math id="M95" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> of 0.77 and mean
<inline-formula><mml:math id="M96" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> of <inline-formula><mml:math id="M97" display="inline"><mml:mn mathvariant="normal">0.47</mml:mn></mml:math></inline-formula>. When levoglucosan was
included in the regressions, excelsior (aspen wood shavings) smoke is well
correlated with the coniferous fuels (<inline-formula><mml:math id="M98" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.76</mml:mn></mml:mrow></mml:math></inline-formula>–0.97).
This is likely because excelsior smoke was dominated by levoglucosan (43 % of the total abundance), and emissions from coniferous fuels also
contained higher average levoglucosan (mean <inline-formula><mml:math id="M99" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">Levo</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">27</mml:mn></mml:mrow></mml:math></inline-formula> %) than
other fuels (mean <inline-formula><mml:math id="M100" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">Levo</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">14</mml:mn></mml:mrow></mml:math></inline-formula> %, not including excelsior).
Jen et al. (2018a) similarly observed higher average
levoglucosan emission factors among coniferous fuels from filter samples
collected during FIREX. However, with levoglucosan removed from the
regression, excelsior smoke is poorly correlated with conifer-derived smoke
(<inline-formula><mml:math id="M101" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.17</mml:mn></mml:mrow></mml:math></inline-formula>–0.25), likely due in part to the
much simpler overall composition of excelsior smoke compared to other
samples (Table 1).</p>
      <p id="d1e1699">In general, emissions from the miscellaneous fuel types that were sampled in
this work (peat – manzanita in Fig. 4a) are poorly to moderately correlated
with each other (mean <inline-formula><mml:math id="M102" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.46</mml:mn></mml:mrow></mml:math></inline-formula>, mean
<inline-formula><mml:math id="M103" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.22</mml:mn></mml:mrow></mml:math></inline-formula>) and the coniferous fuel types (mean
<inline-formula><mml:math id="M104" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.53</mml:mn></mml:mrow></mml:math></inline-formula>, mean <inline-formula><mml:math id="M105" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.16</mml:mn></mml:mrow></mml:math></inline-formula>). Of
these, manzanita smoke was the least correlated with all other smoke samples
(<inline-formula><mml:math id="M106" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">All</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> &lt; 0.32 and
<inline-formula><mml:math id="M107" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> &lt; 0.19); the unique signature of
manzanita smoke is further discussed in Sect. 3.2.1. Peat smoke was also
poorly correlated with most other biomass-burning emission samples, largely
due to a high abundance of aliphatic compounds, including <inline-formula><mml:math id="M108" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula>-alkanes<?pagebreak page17809?> and
1-alkenes, as has been observed previously (George et al., 2016; Hatch et
al., 2015; Jayarathne et al., 2018). The poor correlations are not driven
solely by very low-abundance compounds. For example, in the peat–sagebrush
comparison (Fig. 4c), 15 and 187 compounds with &gt; 1 % and
&gt; 0.1 % abundance, respectively, were present in only one of
the smoke samples (i.e., well outside the factor of 2 uncertainty).</p>
      <p id="d1e1804">Although sufficient data are not available to differentiate the separate
effects of fuel type and combustion efficiency on smoke composition, Fig. 4a
suggests that the diversity of I/SVOCs and their chromatographic profiles
cannot be fully explained by combustion efficiency. For example, rice-straw
smoke was much more strongly correlated with bear-grass smoke
(<inline-formula><mml:math id="M109" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.72</mml:mn></mml:mrow></mml:math></inline-formula>), the only other herbaceous fuel sampled,
despite significantly different MCEs (0.952 vs. 0.897, Table 1) than to the
emissions of the two fires with the most similar MCEs (lodgepole pine,
MCE <inline-formula><mml:math id="M110" display="inline"><mml:mrow><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.95</mml:mn></mml:mrow></mml:math></inline-formula>1, <inline-formula><mml:math id="M111" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.12</mml:mn></mml:mrow></mml:math></inline-formula> and ponderosa pine litter,
MCE <inline-formula><mml:math id="M112" display="inline"><mml:mrow><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.954</mml:mn></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M113" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mi mathvariant="normal">NoLevo</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.15</mml:mn></mml:mrow></mml:math></inline-formula>, Fig. 4a).</p>
<sec id="Ch1.S3.SS2.SSS1">
  <title>Benzenediol isomers</title>
      <p id="d1e1883">Benzenediols (catechol, hydroquinone, and resorcinol) are ubiquitous in
smoke, as described above, and thus are used as a case study to probe the
variability of isomers from different fuel types. All three isomers were
positively identified, demonstrated consistent recovery (Fig. S3), and are
expected to exhibit similar instrument responses; therefore uncorrected
experimental artifacts are not expected to significantly influence the
comparison of these three compounds. Figure 5a shows the fraction of the
total peak area (SPE <inline-formula><mml:math id="M114" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> PTFE) from each burn attributed to the three
benzenediol isomers. For nearly all samples, catechol was the dominant isomer
and composed a relatively consistent fraction of the measured smoke, at
2.9 %–7.2 % of the total peak area measured for each fire. In
contrast, resorcinol constituted a negligible fraction of the total emissions
in all samples. Hydroquinone emissions were much more variable than catechol
(0.29 %–33 % of the total measured emissions). Hydroquinone was
overwhelmingly dominant in manzanita smoke, accounting for 33 % of the
total measured peak area and with relative abundance <inline-formula><mml:math id="M115" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">10</mml:mn><mml:mo>×</mml:mo></mml:mrow></mml:math></inline-formula> that of
catechol. Sagebrush smoke also showed relatively high emissions of
hydroquinone, comparable to that of catechol. These similar hydroquinone
signatures are likely one reason that manzanita smoke was best correlated
with sagebrush smoke (Fig. 4a). The data in Fig. 5a are arranged by
increasing MCE and demonstrate that the variable isomer speciation was not
likely due to effects of combustion efficiency, but rather arises from the
fuel composition. For example, the hydroquinone signature from manzanita
fires can be attributed to its high concentration of arbutin, which contains
a hydroquinone group that breaks off during pyrolysis (Jen et al., 2018b).
These results demonstrate that important fuel-dependent emissions signatures
could be missed when emissions measurements are performed solely with
non-isomer-specific measurements.</p>
      <p id="d1e1905">The chromatographic data further indicate a significant difference in
volatility among the benzenediol isomers. For compounds with similar
functionality – i.e., similar activity coefficients in the column stationary
phase – the retention factor is inversely correlated with vapor pressure
(Dettmer-Wilde and Engewald, 2014). Hydroquinone and resorcinol both
elute just after 4-methyl catechol in the first GC <inline-formula><mml:math id="M116" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC dimension,
which is significantly later than catechol, thereby suggesting significant
differences in the volatilities of the benzenediol isomers. Because gas and
particle phases were trapped separately on the SPE and PTFE filters, the
gas-particle partitioning for each isomer can be investigated. The median
gas-phase fractions of catechol and hydroquinone were 0.96 and 0.57,
respectively (Fig. 5a), consistent with lower hydroquinone volatility.
Schauer et al. (2001) similarly observed isomer-dependent
benzenediol partitioning in smoke from residential wood combustion.</p>
      <?pagebreak page17810?><p id="d1e1915">The measured partitioning was used to estimate the saturation concentration
(<inline-formula><mml:math id="M117" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>) of catechol and hydroquinone from each fire, based on
Pankow (1994) and following Donahue et al. (2006) (Eq. 1):
              <disp-formula id="Ch1.E1" content-type="numbered"><mml:math id="M118" display="block"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>+</mml:mo><mml:mfenced close=")" open="("><mml:mstyle displaystyle="false"><mml:mfrac style="text"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula>
            The particle-phase fraction (<inline-formula><mml:math id="M119" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) of compound <inline-formula><mml:math id="M120" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula> was based on the measured
peak area from the PTFE filter relative to the total (PTFE <inline-formula><mml:math id="M121" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> SPE) peak
area; OA concentrations (<inline-formula><mml:math id="M122" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) were estimated using PM<inline-formula><mml:math id="M123" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2.5</mml:mn></mml:msub></mml:math></inline-formula> data for
each fire that was scaled by the corresponding OC fraction based on OC/EC
measurements (Jen et al., 2018a). The gas-phase fractions
for individual fires as a function of <inline-formula><mml:math id="M124" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> are shown in Fig. 5b. For
both catechol and hydroquinone, the gas-phase fractions for fires 50 and 56
were anomalously low, likely due to an unidentified error or artifact in the
filter measurements. It is possible that the recovered extraction volumes
were lower from the corresponding SPE samples, however this was not tracked
for each sample. Future use of recovery standards and further method
optimization will help to correct for any sample-to-sample inconsistencies
in the extraction efficiency and ultimately better constrain the
partitioning estimates. Fires 50 and 56 were therefore omitted from the mean
and standard deviation values of each compound to provide a best estimate of
<inline-formula><mml:math id="M125" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> (although fire 66 also appears to be an outlier for
catechol, it is not a clear outlier for hydroquinone and so the data have
been retained). Using data from the remaining fires (except burn 2 for
hydroquinone because it was not detected in both phases), the calculated
mean <inline-formula><mml:math id="M126" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">Cat</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> is (<inline-formula><mml:math id="M127" display="inline"><mml:mrow><mml:mn mathvariant="normal">6.2</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">4.9</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>, compared to <inline-formula><mml:math id="M128" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">HQ</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> of
(<inline-formula><mml:math id="M129" display="inline"><mml:mrow><mml:mn mathvariant="normal">3.6</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">1.7</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> (including the
outliers from burns 50 and 56 yields <inline-formula><mml:math id="M130" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values of (<inline-formula><mml:math id="M131" display="inline"><mml:mrow><mml:mn mathvariant="normal">5.6</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">4.9</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M132" display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula><inline-formula><mml:math id="M133" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and (<inline-formula><mml:math id="M134" display="inline"><mml:mrow><mml:mn mathvariant="normal">3.3</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">1.8</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for catechol and hydroquinone, respectively).
The parameterized phase distributions as a function of <inline-formula><mml:math id="M135" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> for
hydroquinone and catechol using the mean <inline-formula><mml:math id="M136" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values <inline-formula><mml:math id="M137" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula> one
standard deviation are included in Fig. 5b.</p>
      <p id="d1e2264">To evaluate the accuracy of the filter-based estimates, the mean <inline-formula><mml:math id="M138" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values were compared to those calculated using Antoine vapor-pressure
coefficients (Burgess, 2018). The available Antoine coefficients are valid at
elevated temperatures only (159–326 <inline-formula><mml:math id="M139" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for hydroquinone and
118–245 <inline-formula><mml:math id="M140" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for catechol); thus, vapor pressures were estimated at
the minimum valid temperature and extrapolated down to the average ambient
FSL temperature (20.8 <inline-formula><mml:math id="M141" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C) using the Clausius–Clapeyron equation and
reported <inline-formula><mml:math id="M142" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> values. Literature values of <inline-formula><mml:math id="M143" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> varied widely for both isomers. To represent this
variability, feasible bounds of <inline-formula><mml:math id="M144" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> were determined using two
<inline-formula><mml:math id="M145" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> values for each compound, one reported by NIST (70.5
and 62.2 kJ mol<inline-formula><mml:math id="M146" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for hydroquinone and catechol, respectively;
Burgess, 2018) and the other by Verevkin and Kozlova (2008) (84.4 and
70 kJ mol<inline-formula><mml:math id="M147" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for hydroquinone and catechol, respectively). The
resulting <inline-formula><mml:math id="M148" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values are summarized in Table 2 and the
parameterized gas-particle partitioning for both literature assessments is
shown in Fig. 5b.</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T2"><caption><p id="d1e2401">Measured and literature-derived <inline-formula><mml:math id="M149" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> (<inline-formula><mml:math id="M150" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>g m<inline-formula><mml:math id="M151" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) values of benzenediol
isomers.</p></caption><oasis:table frame="topbot"><?xmltex \begin{scaleboxenv}{.90}[.90]?><oasis:tgroup cols="3">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:thead>
       <oasis:row rowsep="1">
         <oasis:entry colname="col1"/>
         <oasis:entry colname="col2">Catechol</oasis:entry>
         <oasis:entry colname="col3">Hydroquinone</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>
         <oasis:entry colname="col1">This work</oasis:entry>
         <oasis:entry colname="col2">(<inline-formula><mml:math id="M154" display="inline"><mml:mrow><mml:mn mathvariant="normal">6.2</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">4.9</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3">(<inline-formula><mml:math id="M155" display="inline"><mml:mrow><mml:mn mathvariant="normal">3.6</mml:mn><mml:mo>±</mml:mo><mml:mn mathvariant="normal">1.7</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Antoine <inline-formula><mml:math id="M156" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> NIST <inline-formula><mml:math id="M157" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msubsup><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M158" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.05</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">5</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M159" display="inline"><mml:mrow><mml:mn mathvariant="normal">5.70</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Antoine <inline-formula><mml:math id="M160" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> Verevkin <inline-formula><mml:math id="M161" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msubsup><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M162" display="inline"><mml:mrow><mml:mn mathvariant="normal">4.76</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M163" display="inline"><mml:mrow><mml:mn mathvariant="normal">9.26</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>
         <oasis:entry colname="col1">Mean of Antoine estimates</oasis:entry>
         <oasis:entry colname="col2"><inline-formula><mml:math id="M164" display="inline"><mml:mrow><mml:mn mathvariant="normal">7.63</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
         <oasis:entry colname="col3"><inline-formula><mml:math id="M165" display="inline"><mml:mrow><mml:mn mathvariant="normal">3.31</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup><?xmltex \end{scaleboxenv}?></oasis:table><?xmltex \begin{scaleboxenv}{.90}[.90]?><table-wrap-foot><p id="d1e2436"><inline-formula><mml:math id="M152" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msup></mml:math></inline-formula> Calculated from vapor pressures estimated using Antoine coefficients
(Burgess, 2018) scaled to ambient temperature using <inline-formula><mml:math id="M153" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> data from NIST (Burgess, 2018) or Verevkin and
Kozlova (2008).</p></table-wrap-foot><?xmltex \end{scaleboxenv}?></table-wrap>

      <p id="d1e2696">Although there is significant scatter in the filter-based <inline-formula><mml:math id="M166" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>
estimates, the mean values for both compounds fall within the two
literature-based <inline-formula><mml:math id="M167" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>estimates suggesting that on average the
measured phase partitioning captured the differences in volatility between
the two isomers and with reasonable accuracy. Further, considering that the
estimated <inline-formula><mml:math id="M168" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values are more likely to be underestimated
rather than overestimated due to adsorption of I/SVOCs to the PTFE filter
(Mader and Pankow, 2001), the filter-based
<inline-formula><mml:math id="M169" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> estimates are more consistent with the Antoine <inline-formula><mml:math id="M170" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> NIST
<inline-formula><mml:math id="M171" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> thermodynamic data. The Antoine <inline-formula><mml:math id="M172" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> NIST <inline-formula><mml:math id="M173" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> estimate displayed a consistent offset from the filter-based method for
both compounds (i.e., Antoine <inline-formula><mml:math id="M174" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>/filter-based <inline-formula><mml:math id="M175" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.7</mml:mn></mml:mrow></mml:math></inline-formula> and 1.6 for catechol and hydroquinone, respectively) and a similar
ratio between the isomers (<inline-formula><mml:math id="M176" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">Cat</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">HQ</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>=</mml:mo><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">18</mml:mn></mml:mrow></mml:math></inline-formula> for both the measured and Antoine-based values);
for comparison, <inline-formula><mml:math id="M177" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">Cat</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">HQ</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">51</mml:mn></mml:mrow></mml:math></inline-formula>
using the Verevkin and Kozlova (2008) <inline-formula><mml:math id="M178" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> data, which is
likely too large of a volatility difference between the two isomers based on
a comparison with hexane- and cyclohexane- diols (Capouet and
Muller, 2006).</p>
      <p id="d1e2890">Based on their <inline-formula><mml:math id="M179" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values, benzenediols are classified as IVOCs
(defined as <inline-formula><mml:math id="M180" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">300</mml:mn><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">6</mml:mn></mml:msup><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>;
Li et al., 2016) and are therefore expected to
reside almost entirely in the gas phase at ambient OA loadings (<inline-formula><mml:math id="M181" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub><mml:mo>≪</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>), consistent with the
parameterizations shown in Fig. 5b. However, at the high OA concentrations
typical of biomass-burning smoke, considerable fractions of both catechol
and hydroquinone – and by extension IVOCs in general – can partition to the
particle phase in fresh emissions (Robinson et al., 2007). Therefore,
single-phase measurements of such compounds in fresh/undiluted smoke may
underestimate the total emissions by up to a factor of 2 and with
significantly different potential errors across the I/SVOC volatility range
as illustrated using the two isomers (Fig. 5b). It is also likely that
wall losses within sample lines are significantly greater for hydroquinone
than catechol. For example, using the parameterization of
Pagonis et al. (2017) and our mean filter-derived
<inline-formula><mml:math id="M182" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values, delays in measurement response to benzenediols
flowing through <inline-formula><mml:math id="M183" display="inline"><mml:mrow><mml:mn mathvariant="normal">3</mml:mn><mml:mo>/</mml:mo><mml:msup><mml:mn mathvariant="normal">16</mml:mn><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> i.d. Teflon tubing are calculated to be 2.2 and 39 min m<inline-formula><mml:math id="M184" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> of tubing at a flow rate of 1 L min<inline-formula><mml:math id="M185" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for catechol and
hydroquinone, respectively (1.4 and 26 min m<inline-formula><mml:math id="M186" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for catechol and
hydroquinone, respectively using the Antoine <inline-formula><mml:math id="M187" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> NIST <inline-formula><mml:math id="M188" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>
-derived <inline-formula><mml:math id="M189" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values). Transport delays increase further with
decreasing flow rate and increasing tube diameter
(Pagonis et al., 2017). Such large differences in
transport times between the two isomers could have a considerable impact on
the measured total benzenediol emissions for some fuels (e.g., sagebrush and
manzanita). To evaluate any potential effects on the filter measurements,
the estimated delay in hydroquinone transport through the sample tube used
here was <inline-formula><mml:math id="M190" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> min (0.3 min for catechol; assuming the transport
behavior of benzenediols through passivated stainless steel is similar to
Teflon). Such time delays may have significantly impacted the hydroquinone
measurements for rice straw and excelsior emissions, for which the fires
lasted only 7–8 min. All other fires lasted 13–41 min and thus sample line
wall effects are expected to have impacted the hydroquinone results from
each fire by at most 12 %–38 %. The magnitude of the actual measurement
impacts would depend in part on the timing of maximum hydroquinone emissions
relative to the sampling period. Based on the emissions vs. time profiles of
VOCs from online measurements of the FIREX fires (Sekimoto et al., 2018;
Selimovic et al., 2018), maximum emissions generally occurred during the
first half of the fire periods (or at least &gt; 5 min prior to the
end of the filter sample) and therefore any effects of transport delays on
the hydroquinone (and other I/SVOC) measurements were likely minimal for
most fires.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5"><caption><p id="d1e3093"><bold>(a)</bold> The percentage of the total (SPE <inline-formula><mml:math id="M191" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> PTFE) peak area attributed
to benzenediol isomers for each fire. Samples are arranged with increasing
modified combustion efficiency (MCE) left to right. Fire numbers are
indicated for the two ponderosa pine burns. <bold>(b)</bold> Calculated partitioning of
catechol and hydroquinone (HQ) as a function of organic aerosol
concentration (<inline-formula><mml:math id="M192" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi mathvariant="normal">OA</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>). Solid lines indicate the partitioning based on the
mean <inline-formula><mml:math id="M193" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> values calculated in this work, with the shaded areas
indicating plus/minus one standard deviation of the mean <inline-formula><mml:math id="M194" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula>. Dashed
lines represent the partitioning calculated from vapor pressures estimated
using Antoine coefficients and scaled to ambient temperature using <inline-formula><mml:math id="M195" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>H</mml:mi><mml:mi mathvariant="normal">vap</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> data from NIST (Burgess, 2018) and Verevkin and
Kozlova (2008).</p></caption>
            <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f05.png"/>

          </fig>

      <p id="d1e3161">The different phase distributions among the benzenediol isomers also suggest
different oxidation and other reaction pathways could be available for
catechol versus hydroquinone. Smith et al. (2015) determined that
benzenediols can react rapidly in the aqueous phase with both triplet-state
oxidants and OH radical yielding significant SOA mass (<inline-formula><mml:math id="M196" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">75</mml:mn></mml:mrow></mml:math></inline-formula> %–100 % yield); hydroquinone is further susceptible to aqueous-phase
self-photodegradation with <inline-formula><mml:math id="M197" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">90</mml:mn></mml:mrow></mml:math></inline-formula> % SOA yield. Overall, the
partitioning estimates calculated in this<?pagebreak page17811?> work support the conclusions of
Smith et al. (2015) that aqueous/condensed-phase SOA production
mechanisms are more likely to occur for hydroquinone than catechol, for
which gas-phase oxidation will dominate SOA production based on its low
condensed-phase fraction (Fig. 5). Rate constants and SOA yield estimates,
however, are not available for gas-phase reactions of hydroquinone (or
resorcinol).</p>
</sec>
<sec id="Ch1.S3.SS2.SSS2">
  <title>Volatility distribution</title>
      <p id="d1e3190">The benzenediol case study above demonstrates that the mean partitioning of
individual compounds from SPE–PTFE comparisons can be estimated with
reasonable accuracy to derive volatility distributions with decadal
resolution. In this section, a single fire was used to investigate the
overall volatility distribution of I/SVOCs in smoke following Eq. (1) and the
approach outlined above. Rotten-log smoke (fire 31) was chosen because it was
the only sample for which compounds present in both phases constituted a
majority of the overall abundance (73 %). The estimated <inline-formula><mml:math id="M198" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>
values for benzenediol isomers from fire 31 were within a factor of 3 of the
mean values, suggesting sufficient accuracy for use within the volatility
basis set (VBS) framework that is built upon order of magnitude volatility
bins (Donahue et al., 2009). Therefore, among the available samples, the
volatility distribution can be estimated most completely for the rotten log
fire, although given the different I/SVOC chromatographic profiles observed
for different fuels, as described above, the derived volatility distribution
may not be broadly applicable.</p>
      <p id="d1e3206">The estimated volatility distribution for compounds observed in rotten log
smoke is shown in Fig. 6a. Saturation concentrations could not be estimated
for compounds that were detected in only one phase; therefore, particle- and
gas-phase-only compounds were lumped into the log<inline-formula><mml:math id="M199" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M200" display="inline"><mml:mrow><mml:mo>≤</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M201" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">7</mml:mn></mml:mrow></mml:math></inline-formula> bins, respectively. It is possible that such compounds could belong in one
of the middle volatility bins if, for example, the compound was actually
present in both phases but was below detection limit/peak selection criteria
in either the PTFE or SPE sample. For compounds that were measured on both
filters, volatilities were estimated in the log<inline-formula><mml:math id="M202" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>–6 range with
the highest fractions of the emissions falling in the log<inline-formula><mml:math id="M203" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> and
4 bins. The relative fractions could change following improved quantification
and correction of experimental artifacts, as outlined above. For example,
<inline-formula><mml:math id="M204" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">Cat</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> from this fire falls within the log<inline-formula><mml:math id="M205" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>
bin, whereas the mean value derived above would place catechol in the
log<inline-formula><mml:math id="M206" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> bin; we leave catechol in the log<inline-formula><mml:math id="M207" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> bin here
for consistency with the other unknown compounds in this sample.
Additionally, the relative fractions of the higher volatility bins (i.e.,
log<inline-formula><mml:math id="M208" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> bins <inline-formula><mml:math id="M209" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula>) would likely increase following correction of
the relatively poor recovery exhibited by such compounds. Regardless, our
estimated volatility distribution demonstrates that the SPE–PTFE method
enables analysis of gas-phase compounds with lower volatility than has been
observed using PTR-TOFMS and sorbent-tube GC <inline-formula><mml:math id="M210" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS analyses,
where little material has been reported in log<inline-formula><mml:math id="M211" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> bins &lt; 5
(Hatch et al., 2017; Koss et al., 2018), and is therefore a complementary
approach to common gas-phase measurements.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><caption><p id="d1e3371"><bold>(a)</bold> Volatility distribution of compounds observed in fresh
rotten log smoke. Markers represent the derived volatility distribution for
biomass-burning smoke organic aerosol from May et al. (2013). Particle-
(gas-) phase only compounds are lumped into the log<inline-formula><mml:math id="M212" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>≤</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula> (<inline-formula><mml:math id="M213" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">7</mml:mn></mml:mrow></mml:math></inline-formula>) bin. <bold>(b)</bold> As in panel <bold>(a)</bold>, for a
theoretical 100-fold evaporation of POA. <bold>(c)</bold> Speciation of the
compound classes contributing to each volatility bin with measurable <inline-formula><mml:math id="M214" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> values. The pie chart bounded by the box shows the speciation of the
I/SVOCs that were predicted to volatilize from the particle phase across all
volatility classes following evaporation of POA represented in
panel <bold>(b)</bold>.</p></caption>
            <?xmltex \igopts{width=213.395669pt}?><graphic xlink:href="https://acp.copernicus.org/articles/18/17801/2018/acp-18-17801-2018-f06.png"/>

          </fig>

      <p id="d1e3431">May et al. (2013) estimated the volatility distribution of
biomass-burning OA from isothermal dilution and thermodenuder-aerosol mass
spectrometry measurements of laboratory fires. Their distribution could be
constrained within the log<inline-formula><mml:math id="M215" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:math></inline-formula>–4 range and is included for
comparison in Fig. 6a. The trends observed in bins log<inline-formula><mml:math id="M216" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:math></inline-formula>–4
are nominally similar between the two studies, although the fractions are
lower in this work due to allocation of some mass into bins &gt; 4,
which illustrates that the SPE filters enabled measurement of higher
volatility compounds, although the relative abundances of such compounds are
likely underestimated. The relative fractions in the log<inline-formula><mml:math id="M217" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>≤</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>
and 1 bins<?pagebreak page17812?> are opposite, however the sum of the two bins is very similar
between the two studies (42 % in this work, 40 % in May et al.).
Although the relative fractions in each bin do not line up exactly, the
agreement is reasonable considering the two very different analytical
approaches (speciation of individual compounds in gas and particle phases
vs. volatility measurements of bulk OA) and the different fires included in
each distribution.</p>
      <p id="d1e3482">The compound-class speciation for compounds observed in each volatility bin
(for log<inline-formula><mml:math id="M218" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>–6) is given in Fig. 6c. For compounds that could not
be positively or tentatively identified, compound classes were determined by
mass-spectral fragmentation patterns (Lai and Fiehn, 2018).
Alcohols and carboxylic acids were defined by significant <inline-formula><mml:math id="M219" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>/</mml:mo><mml:mi>z</mml:mi></mml:mrow></mml:math></inline-formula> 75 or 147 (and
occasionally 103, 117, or 131) peaks; spectra for phenol derivatives
contained large <inline-formula><mml:math id="M220" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>/</mml:mo><mml:mi>z</mml:mi></mml:mrow></mml:math></inline-formula> 73, negligible <inline-formula><mml:math id="M221" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>/</mml:mo><mml:mi>z</mml:mi></mml:mrow></mml:math></inline-formula> 75, and presence of higher <inline-formula><mml:math id="M222" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>/</mml:mo><mml:mi>z</mml:mi></mml:mrow></mml:math></inline-formula> peaks,
indicative of resonance-stabilized aromatic structures; anhydrosugars and
related compounds were characterized by <inline-formula><mml:math id="M223" display="inline"><mml:mrow><mml:mi>m</mml:mi><mml:mo>/</mml:mo><mml:mi>z</mml:mi></mml:mrow></mml:math></inline-formula> 204 and 217; and “other”
compounds were underivatized oxygenates or N/S-containing compounds (no mass
spectral trimethylsilyl or hydrocarbon signatures) and eluted early in the
secondary GC <inline-formula><mml:math id="M224" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC dimension, consistent with higher polarity than
derivatized compounds. Only one hydrocarbon (a PAH) was observed in
rotten-log smoke within the characterized volatility range.</p>
      <p id="d1e3566">The log<inline-formula><mml:math id="M225" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:math></inline-formula>–6 bins are dominated by alcohols/acids and phenolic
compounds, with increasing fractions of anhydrosugars with decreasing
volatility (Fig. 6c). “Other” compounds were predominantly found in the
highest volatility bin for which speciation was characterized (log<inline-formula><mml:math id="M226" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">6</mml:mn></mml:mrow></mml:math></inline-formula>); the absence of derivatization for such compounds implies that they
lack –OH (or –NH, –SH) groups and therefore lack vapor-pressure lowering
hydrogen-bonding functionality (Ziemann, 2011). Only two compounds were
binned into the log<inline-formula><mml:math id="M227" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> bin: levoglucosan and its unidentified
isomer. May et al. (2012) and Booth et al. (2011)
both report measured sub-cooled liquid vapor pressures for levoglucosan
equivalent to <inline-formula><mml:math id="M228" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> of <inline-formula><mml:math id="M229" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">13</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M230" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>g m<inline-formula><mml:math id="M231" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at 298 K. These reported values are within <inline-formula><mml:math id="M232" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">25</mml:mn></mml:mrow></mml:math></inline-formula> % of our estimated
levoglucosan <inline-formula><mml:math id="M233" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> of 16 <inline-formula><mml:math id="M234" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>g m<inline-formula><mml:math id="M235" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, demonstrating with the
benzenediol isomer <inline-formula><mml:math id="M236" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> estimates above that our volatility
estimates are reasonable over 4 orders of magnitude, encompassing both
predominantly gas-phase and predominantly particle-phase compounds and
providing greater confidence in the overall estimated volatility
distribution. Whereas our estimated benzenediol <inline-formula><mml:math id="M237" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>i</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> values
appeared to be underestimated, our estimated value for levoglucosan could be
higher than literature estimates because the levoglucosan peak in the PTFE
samples was overloaded on the GC <inline-formula><mml:math id="M238" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC and may be out of the linear
quantification range resulting in an underestimated particle-phase fraction.
It is also possible that levoglucosan was only observable on the SPE filter
due to its extremely high abundance, as only 0.3 % of the total
levoglucosan signal was found on the SPE filter for the rotten log fire.
Other compounds with similar gas-particle partitioning but much lower
abundance would likely fall below the detection limit on the SPE filters and
such compounds would therefore be lumped into the log<inline-formula><mml:math id="M239" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>≤</mml:mo></mml:mrow></mml:math></inline-formula>0 bin
in Fig. 6.</p>
      <p id="d1e3746">As smoke dilutes in the atmosphere, a considerable fraction of OA is
expected to volatilize (Bian et al., 2017; Donahue et al., 2006; Grieshop
et al., 2009b; Robinson et al., 2007). Figure 6b shows the predicted
gas-particle partitioning following a theoretical 100-fold evaporation of
rotten-log smoke POA (<inline-formula><mml:math id="M240" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">4400</mml:mn></mml:mrow></mml:math></inline-formula> to 44 <inline-formula><mml:math id="M241" display="inline"><mml:mi mathvariant="normal">µ</mml:mi></mml:math></inline-formula>g m<inline-formula><mml:math id="M242" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>) and
demonstrates that approximately 40 % of the particle-phase I/SVOCs<?pagebreak page17813?> would
evaporate following such perturbation (ignoring potential OA activity
effects). Comparison with Fig. 6a illustrates that compounds in the
log<inline-formula><mml:math id="M243" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> and 4 bins volatilized completely (as expected for
IVOCs), in addition to a significant fraction of the log<inline-formula><mml:math id="M244" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula> and
2 bins. The framed pie chart of Fig. 6c shows the speciated compound
classes of the POA that would theoretically volatilize following dilution
(including all volatility bins). Of this material newly accessible to
gas-phase oxidation, 41 % is attributable to anhydrosugars (levoglucosan
and several isomers/related compounds), 38 % to phenol derivatives
(catechol, vanillic acid, 4-methyl catechol, pyrogallol, 3-vanilpropanol)
and 21 % to alcohols/acids (unknowns), where the identifiable compounds
that account for &gt; 5 % of the corresponding class of
volatilized material are listed in descending order parenthetically. These
speciated volatility measurements provide a first approximation of the types
of I/SVOCs that can evaporate from POA and react as non-traditional SOA
precursors. All such compounds were oxygenated and will therefore exhibit
very different chemistry and SOA yields than I/SVOCs in vehicular emissions,
which have generally been characterized as almost entirely hydrocarbons,
particularly alkanes (Tkacik et al., 2012; Zhao et al., 2014, 2016). Of the identified compounds, only catechol has been studied with
respect to gas-phase oxidation and SOA formation (Finewax et al., 2018;
Nakao et al., 2011; Yee et al., 2013). Therefore more work is needed to
better understand the relative importance of gas-phase vs. heterogeneous
reaction pathways for biomass-burning-derived I/SVOCs.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S4" sec-type="conclusions">
  <title>Conclusions</title>
      <p id="d1e3816">This study demonstrates the use of SPE filters for untargeted analysis of
gas-phase I/SVOCs in biomass-burning smoke samples. Based on extensive
analysis of standard compounds, the extraction recovery was generally lower
from SPE filters than PTFE filters. However, SPE-induced extraction biases
were generally consistent for each compound class and could be corrected,
although recovery was low for the most volatile compounds due volatilization
during blow down. Future improvements in the extraction protocol,
specifically testing additional solvents and drying time, in addition to the
use of recovery, internal, and external standards, should enable
quantification of compounds collected onto SPE filters. Further, negligible
breakthrough was observed through SPE filters, demonstrating their high
trapping efficiency. Therefore, SPE filters appear to be a suitable
alternative to PUF/XAD measurements for untargeted analysis of I/SVOCs in
air samples.</p>
      <p id="d1e3819">Analysis of biomass-burning smoke PTFE and SPE filter samples collected
during laboratory fires demonstrated that particle- and gas-phase compounds
were separately trapped on the respective filter types, with most of the
observed compounds detected on only one filter type. The GC <inline-formula><mml:math id="M245" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS-derived chromatographic profiles of I/SVOCs showed significant
diversity among the different fuel types tested, with high correlations
observed only among emissions from coniferous fuels. The chromatographic
profiles did not appear to be strongly related to combustion efficiency.</p>
      <p id="d1e3829">Of the compounds observed on the SPE filters, catechol was the most common,
highly abundant compound detected and was generally the dominant benzenediol
isomer. However, fuel-dependent signatures were observed among the
benzenediol isomers, with hydroquinone the most abundant isomer in manzanita
smoke. Further, hydroquinone was shown to be significantly less volatile
than catechol (<inline-formula><mml:math id="M246" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">Cat</mml:mi><mml:mo>∗</mml:mo></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>C</mml:mi><mml:mi mathvariant="normal">HQ</mml:mi><mml:mo>∗</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula>
<inline-formula><mml:math id="M247" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">18</mml:mn></mml:mrow></mml:math></inline-formula>), which can lead to considerable differences in
sampling-line losses, as well as in gas-particle partitioning and oxidation
chemistry between these isomers. This demonstrates the need for isomer
speciation to achieve a holistic understanding of biomass-burning emissions
and plume chemistry.</p>
      <p id="d1e3864">Based on the phase-specific measurements enabled by PTFE and SPE filter
samples, the speciated volatility distribution of Douglas fir rotten log
smoke was estimated. Detection of compounds with log<inline-formula><mml:math id="M248" display="inline"><mml:mrow><mml:msup><mml:mi>C</mml:mi><mml:mo>∗</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M249" display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>–4
demonstrates that the SPE–PTFE method enables analysis of gas-phase
compounds with lower volatility than has been observed using PTR-TOFMS and
sorbent-tube GC <inline-formula><mml:math id="M250" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> GC-TOFMS analyses. Effectively 100 % of the
compounds observed in both phases were oxygenates (or contained other
heteroatoms). The POA likely to volatilize during plume dilution was
attributed to anhydrosugars, phenol derivatives, and unidentified
alcohols/acids, for which gas-phase chemistry has not been extensively
studied.</p>
</sec>

      
      </body>
    <back><notes notes-type="dataavailability">

      <p id="d1e3900">All PTFE and SPE filter data are available for download from the NOAA FIREX
archive at
<uri>https://esrl.noaa.gov/csd/groups/csd7/measurements/2016firex/FireLab/DataDownload/</uri> (NOAA, 2018).</p>
  </notes><app-group>
        <supplementary-material position="anchor"><p id="d1e3906">The supplement related to this article is available online at: <inline-supplementary-material xlink:href="https://doi.org/10.5194/acp-18-17801-2018-supplement" xlink:title="pdf">https://doi.org/10.5194/acp-18-17801-2018-supplement</inline-supplementary-material>.</p></supplementary-material>
        </app-group><notes notes-type="authorcontribution">

      <p id="d1e3915">LEH and KCB designed the
experiments. LEH collected the samples and analyzed the data. ARU extracted the
FIREX filter samples. CNJ and AHG designed and prepared the biomass-burning
standards. ML served as the EMSL User Proposal host. LEH and KCB interpreted the
data and wrote the manuscript; all the other authors provided comments.</p>
  </notes><notes notes-type="competinginterests">

      <p id="d1e3921">The authors declare that they have no conflict of
interest.</p>
  </notes><ack><title>Acknowledgements</title><?pagebreak page17814?><p id="d1e3927">This work was supported by NOAA AC4 grants NA16OAR4310103 (UCR) and
NA16OAR4310107 (UCB). CNJ acknowledges support from NSF PFS (AGS-1524211). A
portion of this research was performed using EMSL (proposal ID 49601), a DOE
Office of Science User Facility sponsored by the Office of Biological and
Environmental Research. We thank James Roberts (NOAA), Carsten Warneke
(NOAA), and Robert Yokelson (University of Montana), as well as FSL staff for
organizing the FIREX campaign. We thank Tianqu Cai and Jason Surratt
(University of North Carolina, Chapel Hill) for sharing PM<inline-formula><mml:math id="M251" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2.5</mml:mn></mml:msub></mml:math></inline-formula> data.
<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?> Edited by: Jacqui Hamilton<?xmltex \hack{\newline}?>
Reviewed by: two anonymous referees</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bib1"><label>1</label><mixed-citation>Akagi, S. K., Yokelson, R. J., Wiedinmyer, C., Alvarado, M. J., Reid, J. S., Karl, T., Crounse, J. D., and Wennberg, P. O.:
Emission factors for open and domestic biomass burning for use in atmospheric models, Atmos. Chem. Phys., 11, 4039–4072, <ext-link xlink:href="https://doi.org/10.5194/acp-11-4039-2011" ext-link-type="DOI">10.5194/acp-11-4039-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib2"><label>2</label><mixed-citation>Akagi, S. K., Craven, J. S., Taylor, J. W., McMeeking, G. R., Yokelson, R. J., Burling, I. R., Urbanski, S. P., Wold, C. E.,
Seinfeld, J. H., Coe, H., Alvarado, M. J., and Weise, D. R.: Evolution of trace gases and particles emitted by a chaparral fire
in California, Atmos. Chem. Phys., 12, 1397–1421, <ext-link xlink:href="https://doi.org/10.5194/acp-12-1397-2012" ext-link-type="DOI">10.5194/acp-12-1397-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib3"><label>3</label><mixed-citation>
Andreae, M. O. and Merlet, P.: Emission of trace gases and aerosols from
biomass burning, Global Biogeochem. Cy., 15, 955–966, 2001.</mixed-citation></ref>
      <ref id="bib1.bib4"><label>4</label><mixed-citation>Bian, Q., Jathar, S. H., Kodros, J. K., Barsanti, K. C., Hatch, L. E., May, A. A., Kreidenweis, S. M., and Pierce, J. R.:
Secondary organic aerosol formation in biomass-burning plumes: theoretical analysis of lab studies and ambient plumes,
Atmos. Chem. Phys., 17, 5459–5475, <ext-link xlink:href="https://doi.org/10.5194/acp-17-5459-2017" ext-link-type="DOI">10.5194/acp-17-5459-2017</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib5"><label>5</label><mixed-citation>Bond, T. C., Streets, D. G., Yarber, K. F., Nelson, S. M., Woo, J. H., and
Klimont, Z.: A technology-based global inventory of black and organic carbon
emissions from combustion, J. Geophys. Res.-Atmos., 109,  D14203,
<ext-link xlink:href="https://doi.org/10.1029/2003jd003697" ext-link-type="DOI">10.1029/2003jd003697</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib6"><label>6</label><mixed-citation>Booth, A. M., Montague, W. J., Barley, M. H., Topping, D. O., McFiggans, G., Garforth, A., and Percival, C. J.: Solid state
and sub-cooled liquid vapour pressures of cyclic aliphatic dicarboxylic acids, Atmos. Chem. Phys., 11, 655–665, <ext-link xlink:href="https://doi.org/10.5194/acp-11-655-2011" ext-link-type="DOI">10.5194/acp-11-655-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib7"><label>7</label><mixed-citation>
Burgess, D. R.: Thermochemical Data, in: NIST Chemistry WebBook, NIST
Standard Reference Database Number 69, edited by: Linstrom, P. J. and
Mallard, W. G., National Institute of Standards and Technology,
Gaithersburg, MD, 2018.</mixed-citation></ref>
      <ref id="bib1.bib8"><label>8</label><mixed-citation>Capes, G., Johnson, B., McFiggans, G., Williams, P. I., Haywood, J., and
Coe, H.: Aging of biomass burning aerosols over West Africa: Aircraft
measurements of chemical composition, microphysical properties, and emission
ratios, J. Geophys. Res.-Atmos., 113,  D00c15,
<ext-link xlink:href="https://doi.org/10.1029/2008jd009845" ext-link-type="DOI">10.1029/2008jd009845</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib9"><label>9</label><mixed-citation>Capouet, M. and Müller, J.-F.: A group contribution method for estimating the vapour pressures of a-pinene oxidation products, Atmos. Chem. Phys., 6,
1455–1467, <ext-link xlink:href="https://doi.org/10.5194/acp-6-1455-2006" ext-link-type="DOI">10.5194/acp-6-1455-2006</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib10"><label>10</label><mixed-citation>Christian, T. J., Kleiss, B., Yokelson, R. J., Holzinger, R., Crutzen, P.
J., Hao, W. M., Shirai, T., and Blake, D. R.: Comprehensive laboratory
measurements of biomass-burning emissions: 2. First intercomparison of
open-path FTIR, PTR-MS, and GC- MS/FID/ECD, J. Geophys. Res.-Atmos., 109,
D02311, <ext-link xlink:href="https://doi.org/10.1029/2003jd003874" ext-link-type="DOI">10.1029/2003jd003874</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib11"><label>11</label><mixed-citation>Cubison, M. J., Ortega, A. M., Hayes, P. L., Farmer, D. K., Day, D., Lechner, M. J., Brune, W. H., Apel, E., Diskin, G. S.,
Fisher, J. A., Fuelberg, H. E., Hecobian, A., Knapp, D. J., Mikoviny, T., Riemer, D., Sachse, G. W., Sessions, W., Weber, R. J.,
Weinheimer, A. J., Wisthaler, A., and Jimenez, J. L.: Effects of aging on organic aerosol from open biomass burning smoke in
aircraft and laboratory studies, Atmos. Chem. Phys., 11, 12049–12064, <ext-link xlink:href="https://doi.org/10.5194/acp-11-12049-2011" ext-link-type="DOI">10.5194/acp-11-12049-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib12"><label>12</label><mixed-citation>DeCarlo, P. F., Ulbrich, I. M., Crounse, J., de Foy, B., Dunlea, E. J., Aiken, A. C., Knapp, D., Weinheimer, A. J., Campos, T.,
Wennberg, P. O., and Jimenez, J. L.: Investigation of the sources and processing of organic aerosol over the Central Mexican
Plateau from aircraft measurements during MILAGRO, Atmos. Chem. Phys., 10, 5257–5280, <ext-link xlink:href="https://doi.org/10.5194/acp-10-5257-2010" ext-link-type="DOI">10.5194/acp-10-5257-2010</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib13"><label>13</label><mixed-citation>
Dettmer-Wilde, K. and Engewald, W. (Eds.): Practical Gas Chromatography: A
Comprehensive Reference, Springer-Verlag, Heidelberg, 2014.</mixed-citation></ref>
      <ref id="bib1.bib14"><label>14</label><mixed-citation>Dhammapala, R., Claiborn, C., Jimenez, J., Corkill, J., Gullett, B.,
Simpson, C., and Paulsen, M.: Emission factors of PAHs, methoxyphenols,
levoglucosan, elemental carbon and organic carbon from simulated wheat and
Kentucky bluegrass stubble burns, Atmos. Environ., 41, 2660–2669,
<ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2006.11.023" ext-link-type="DOI">10.1016/j.atmosenv.2006.11.023</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib15"><label>15</label><mixed-citation>Donahue, N. M., Robinson, A. L., Stanier, C. O., and Pandis, S. N.: Coupled
partitioning, dilution, and chemical aging of semivolatile organics,
Environ. Sci. Technol., 40, 2635–2643, <ext-link xlink:href="https://doi.org/10.1021/Es052297c" ext-link-type="DOI">10.1021/Es052297c</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib16"><label>16</label><mixed-citation>Donahue, N. M., Robinson, A. L., and Pandis, S. N.: Atmospheric organic
particulate matter: From smoke to secondary organic aerosol, Atmos.
Environ., 43, 94–106, <ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2008.09.055" ext-link-type="DOI">10.1016/j.atmosenv.2008.09.055</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bib17"><label>17</label><mixed-citation>Erger, C. and Schmidt, T. C.: Disk-based solid-phase extraction analysis of
organic substances in water, Trac-Trend. Anal. Chem., 61, 74–82,
<ext-link xlink:href="https://doi.org/10.1016/j.trac.2014.05.006" ext-link-type="DOI">10.1016/j.trac.2014.05.006</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib18"><label>18</label><mixed-citation>Finewax, Z., de Gouw, J. A., and Ziemann, P. J.: Identification and
Quantification of 4-Nitrocatechol Formed from OH and NO3 Radical-Initiated
Reactions of Catechol in Air in the Presence of NOx: Implications for
Secondary Organic Aerosol Formation from Biomass Burning, Environ. Sci.
Technol., 52, 1981–1989, <ext-link xlink:href="https://doi.org/10.1021/acs.est.7b05864" ext-link-type="DOI">10.1021/acs.est.7b05864</ext-link>, 2018.</mixed-citation></ref>
      <ref id="bib1.bib19"><label>19</label><mixed-citation>Galarneau, E., Harner, T., Shoeib, M., Kozma, M., and Lane, D.: A
preliminary investigation of sorbent-impregnated filters (SIFs) as an
alternative to polyurethane foam (PUF) for sampling gas-phase semivolatile
organic compounds in air, Atmos. Environ., 40, 5734–5740,
<ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2006.05.060" ext-link-type="DOI">10.1016/j.atmosenv.2006.05.060</ext-link>, 2006.</mixed-citation></ref>
      <?pagebreak page17815?><ref id="bib1.bib20"><label>20</label><mixed-citation>Gaston, C. J., Lopez-Hilfiker, F. D., Whybrew, L. E., Hadley, O., McNair,
F., Gao, H. L., Jaffe, D. A., and Thornton, J. A.: Online molecular
characterization of fine particulate matter in Port Angeles, WA: Evidence
for a major impact from residential wood smoke, Atmos. Environ., 138,
99–107, <ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2016.05.013" ext-link-type="DOI">10.1016/j.atmosenv.2016.05.013</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib21"><label>21</label><mixed-citation>George, I. J., Black, R. R., Geron, C. D., Aurell, J., Hays, M. D., Preston,
W. T., and Gullett, B. K.: Volatile and semivolatile organic compounds in
laboratory peat fire emissions, Atmos. Environ., 132, 163–170,
<ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2016.02.025" ext-link-type="DOI">10.1016/j.atmosenv.2016.02.025</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib22"><label>22</label><mixed-citation>Grieshop, A. P., Logue, J. M., Donahue, N. M., and Robinson, A. L.: Laboratory investigation of photochemical oxidation of organic
aerosol from wood fires 1: measurement and simulation of organic aerosol evolution, Atmos. Chem. Phys., 9, 1263–1277, <ext-link xlink:href="https://doi.org/10.5194/acp-9-1263-2009" ext-link-type="DOI">10.5194/acp-9-1263-2009</ext-link>, 2009a.</mixed-citation></ref>
      <ref id="bib1.bib23"><label>23</label><mixed-citation>Grieshop, A. P., Miracolo, M. A., Donahue, N. M., and Robinson, A. L.:
Constraining the Volatility Distribution and Gas-Particle Partitioning of
Combustion Aerosols Using Isothermal Dilution and Thermodenuder
Measurements, Environ. Sci. Technol., 43, 4750–4756, <ext-link xlink:href="https://doi.org/10.1021/Es8032378" ext-link-type="DOI">10.1021/Es8032378</ext-link>,
2009b.</mixed-citation></ref>
      <ref id="bib1.bib24"><label>24</label><mixed-citation>Hatch, L. E., Luo, W., Pankow, J. F., Yokelson, R. J., Stockwell, C. E., and Barsanti, K. C.: Identification and quantification
of gaseous organic compounds emitted from biomass burning using two-dimensional gas chromatography-time-of-flight mass spectrometry,
Atmos. Chem. Phys., 15, 1865–1899, <ext-link xlink:href="https://doi.org/10.5194/acp-15-1865-2015" ext-link-type="DOI">10.5194/acp-15-1865-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib25"><label>25</label><mixed-citation>Hatch, L. E., Yokelson, R. J., Stockwell, C. E., Veres, P. R., Simpson, I. J., Blake, D. R., Orlando, J. J., and Barsanti, K. C.:
Multi-instrument comparison and compilation of non-methane organic gas emissions from biomass burning and implications
for smoke-derived secondary organic aerosol precursors, Atmos. Chem. Phys., 17, 1471–1489, <ext-link xlink:href="https://doi.org/10.5194/acp-17-1471-2017" ext-link-type="DOI">10.5194/acp-17-1471-2017</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib26"><label>26</label><mixed-citation>
Hays, M. D., Geron, C. D., Linna, K. J., Smith, N. D., and Schauer, J. J.:
Speciation of gas-phase and fine particle emissions from burning of foliar
fuels, Environ. Sci. Technol., 36, 2281–2295, 2002.</mixed-citation></ref>
      <ref id="bib1.bib27"><label>27</label><mixed-citation>Hennigan, C. J., Miracolo, M. A., Engelhart, G. J., May, A. A., Presto, A. A., Lee, T., Sullivan, A. P., McMeeking, G. R.,
Coe, H., Wold, C. E., Hao, W.-M., Gilman, J. B., Kuster, W. C., de Gouw, J., Schichtel, B. A., Collett Jr., J. L.,
Kreidenweis, S. M., and Robinson, A. L.: Chemical and physical transformations of organic aerosol from the photo-oxidation of
open biomass burning emissions in an environmental chamber, Atmos. Chem. Phys., 11, 7669–7686, <ext-link xlink:href="https://doi.org/10.5194/acp-11-7669-2011" ext-link-type="DOI">10.5194/acp-11-7669-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib28"><label>28</label><mixed-citation>
Hobbs, P. V., Reid, J. S., Kotchenruther, R. A., Ferek, R. J., and Weiss,
R.: Direct radiative forcing by smoke from biomass burning, Science, 275,
1776–1778, 1997.</mixed-citation></ref>
      <ref id="bib1.bib29"><label>29</label><mixed-citation>Jayarathne, T., Stockwell, C. E., Gilbert, A. A., Daugherty, K., Cochrane, M. A., Ryan, K. C., Putra, E. I., Saharjo, B. H.,
Nurhayati, A. D., Albar, I., Yokelson, R. J., and Stone, E. A.: Chemical characterization of fine particulate matter emitted
by peat fires in Central Kalimantan, Indonesia, during the 2015 El Niño, Atmos. Chem. Phys., 18, 2585–2600, <ext-link xlink:href="https://doi.org/10.5194/acp-18-2585-2018" ext-link-type="DOI">10.5194/acp-18-2585-2018</ext-link>, 2018.</mixed-citation></ref>
      <ref id="bib1.bib30"><label>30</label><mixed-citation>
Jen, C. N., Hatch, L. E., Selimovic, V., Yokelson, R. J., Weber, R.,
Fernandez, A. E., Kreisberg, N. M., Barsanti, K. C., and Goldstein, A. H.:
Speciated and total emission factors of particulate organics from burning
western U.S. wildland fuels and their dependence on combustion efficiency,
Atmos. Chem. Phys. Discuss., submitted, 2018a.</mixed-citation></ref>
      <ref id="bib1.bib31"><label>31</label><mixed-citation>Jen, C. N., Liang, Y. T., Hatch, L. E., Kreisberg, N. M., Stamatis, C.,
Kristensen, K., Battles, J. J., Stephens, S. L., York, R. A., Barsanti, K.
C., and Goldstein, A. H.: High Hydroquinone Emissions from Burning
Manzanita, Environ. Sci. Tech. Let., 5, 309–314, <ext-link xlink:href="https://doi.org/10.1021/acs.estlett.8b00222" ext-link-type="DOI">10.1021/acs.estlett.8b00222</ext-link>,
2018b.</mixed-citation></ref>
      <ref id="bib1.bib32"><label>32</label><mixed-citation>
Jolleys, M. D., Coe, H., McFiggans, G., Capes, G., Allan, J. D., Crosier,
J., Williams, P. I., Allen, G., Bower, K. N., Jimenez, J. L., Russell, L.
M., Grutter, M., and Baumgardner, D.: Characterizing the aging of biomass
burning organic aerosol by use of mixing ratios: A meta-analysis of four
regions, Environ. Sci. Technol., 46, 13093–13102, 2012.</mixed-citation></ref>
      <ref id="bib1.bib33"><label>33</label><mixed-citation>Koss, A. R., Sekimoto, K., Gilman, J. B., Selimovic, V., Coggon, M. M., Zarzana, K. J., Yuan, B., Lerner, B. M.,
Brown, S. S., Jimenez, J. L., Krechmer, J., Roberts, J. M., Warneke, C., Yokelson, R. J., and de Gouw, J.:
Non-methane organic gas emissions from biomass burning: identification, quantification, and emission factors from
PTR-ToF during the FIREX 2016 laboratory experiment, Atmos. Chem. Phys., 18, 3299–3319, <ext-link xlink:href="https://doi.org/10.5194/acp-18-3299-2018" ext-link-type="DOI">10.5194/acp-18-3299-2018</ext-link>, 2018.</mixed-citation></ref>
      <ref id="bib1.bib34"><label>34</label><mixed-citation>Kunzli, N., Avol, E., Wu, J., Gauderman, W. J., Rappaport, E., and
Millstein, J.: Health effects of the 2003 Southern California wildfires on
children, Am. J. Resp. Crit. Care, 174, 1221–1228, <ext-link xlink:href="https://doi.org/10.1164/rccm.200604-519OC" ext-link-type="DOI">10.1164/rccm.200604-519OC</ext-link>,
2006.</mixed-citation></ref>
      <ref id="bib1.bib35"><label>35</label><mixed-citation>Lai, Z. and Fiehn, O.: Mass spectral fragmentation of trimethylsilylated
small molecules, Mass Spectrom. Rev., 37, 245–257, <ext-link xlink:href="https://doi.org/10.1002/mas.21518" ext-link-type="DOI">10.1002/mas.21518</ext-link>,
2018.</mixed-citation></ref>
      <ref id="bib1.bib36"><label>36</label><mixed-citation>Li, Y., Pöschl, U., and Shiraiwa, M.: Molecular corridors and parameterizations of volatility in the chemical evolution of
organic aerosols, Atmos. Chem. Phys., 16, 3327–3344, <ext-link xlink:href="https://doi.org/10.5194/acp-16-3327-2016" ext-link-type="DOI">10.5194/acp-16-3327-2016</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib37"><label>37</label><mixed-citation>Liu, J. C., Pereira, G., Uhl, S. A., Bravo, M. A., and Bell, M. L.: A
systematic review of the physical health impacts from non-occupational
exposure to wildfire smoke, Environ. Res., 136, 120–132, <ext-link xlink:href="https://doi.org/10.1016/j.envres.2014.10.015" ext-link-type="DOI">10.1016/j.envres.2014.10.015</ext-link>,
2015.</mixed-citation></ref>
      <ref id="bib1.bib38"><label>38</label><mixed-citation>
Liu, Y. Q., Goodrick, S., and Heilman, W.: Wildland fire emissions, carbon,
and climate: Wildfire-climate interactions, Forest Ecol. Manag., 317, 80–96,
10.1016/j.foreco.2013.02.020, 2014.</mixed-citation></ref>
      <ref id="bib1.bib39"><label>39</label><mixed-citation>Mader, B. T. and Pankow, J. F.: Gas/solid partitioning of semivolatile
organic compounds (SOCs) to air filters. 3. An analysis of gas adsorption
artifacts in measurements of atmospheric SOCs and organic carbon (OC) when
using Teflon membrane filters and quartz fiber filters, Environ. Sci.
Technol., 35, 3422–3432, <ext-link xlink:href="https://doi.org/10.1021/es0015951" ext-link-type="DOI">10.1021/es0015951</ext-link>, 2001.</mixed-citation></ref>
      <ref id="bib1.bib40"><label>40</label><mixed-citation>May, A. A., Saleh, R., Hennigan, C. J., Donahue, N. M., and Robinson, A. L.:
Volatility of Organic Molecular Markers Used for Source Apportionment
Analysis: Measurements and Implications for Atmospheric Lifetime, Environ.
Sci. Technol., 46, 12435–12444, <ext-link xlink:href="https://doi.org/10.1021/es302276t" ext-link-type="DOI">10.1021/es302276t</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib41"><label>41</label><mixed-citation>May, A. A., Levin, E. J. T., Hennigan, C. J., Riipinen, I., Lee, T.,
Collett, J. L., Jimenez, J. L., Kreidenweis, S. M., and Robinson, A. L.:
Gas-particle partitioning of primary organic aerosol emissions: 3. Biomass
burning, J. Geophys. Res.-Atmos., 118, 11327–11338, <ext-link xlink:href="https://doi.org/10.1002/jgrd.50828" ext-link-type="DOI">10.1002/jgrd.50828</ext-link>,
2013.</mixed-citation></ref>
      <ref id="bib1.bib42"><label>42</label><mixed-citation>May, A. A., Lee, T., McMeeking, G. R., Akagi, S., Sullivan, A. P., Urbanski, S., Yokelson, R. J., and Kreidenweis, S.<?pagebreak page17816?> M.:
Observations and analysis of organic aerosol evolution in some prescribed fire smoke plumes, Atmos. Chem. Phys., 15,
6323–6335, <ext-link xlink:href="https://doi.org/10.5194/acp-15-6323-2015" ext-link-type="DOI">10.5194/acp-15-6323-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib43"><label>43</label><mixed-citation>Mazzoleni, L. R., Zielinska, B., and Moosmuller, H.: Emissions of
levoglucosan, methoxy phenols, and organic acids from prescribed burns,
laboratory combustion of wildland fuels, and residential wood combustion,
Environ. Sci. Technol., 41, 2115–2122, <ext-link xlink:href="https://doi.org/10.1021/es061702c" ext-link-type="DOI">10.1021/es061702c</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib44"><label>44</label><mixed-citation>McDonald, J. D., Zielinska, B., Fujita, E. M., Sagebiel, J. C., Chow, J. C.,
and Watson, J. G.: Fine particle and gaseous emission rates from residential
wood combustion, Environ. Sci. Technol., 34, 2080–2091, <ext-link xlink:href="https://doi.org/10.1021/es9909632" ext-link-type="DOI">10.1021/es9909632</ext-link>, 2000.</mixed-citation></ref>
      <ref id="bib1.bib45"><label>45</label><mixed-citation>Naeher, L. P., Brauer, M., Lipsett, M., Zelikoff, J. T., Simpson, C. D.,
Koenig, J. Q., and Smith, K. R.: Woodsmoke Health Effects: A Review,
Inhal. Toxicol., 19, 67–106, <ext-link xlink:href="https://doi.org/10.1080/08958370600985875" ext-link-type="DOI">10.1080/08958370600985875</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib46"><label>46</label><mixed-citation>Nakao, S., Clark, C., Tang, P., Sato, K., and Cocker III, D.: Secondary organic aerosol formation from phenolic compounds
in the absence of <inline-formula><mml:math id="M252" display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NO</mml:mi><mml:mi mathvariant="normal">x</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, Atmos. Chem. Phys., 11, 10649–10660, <ext-link xlink:href="https://doi.org/10.5194/acp-11-10649-2011" ext-link-type="DOI">10.5194/acp-11-10649-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib47"><label>47</label><mixed-citation>NOAA: FIREX data archive,
<uri>https://esrl.noaa.gov/csd/groups/csd7/measurements/2016firex/FireLab/DataDownload/</uri>,
last access: 9 October 2018.</mixed-citation></ref>
      <ref id="bib1.bib48"><label>48</label><mixed-citation>Ortega, A. M., Day, D. A., Cubison, M. J., Brune, W. H., Bon, D., de Gouw, J. A., and Jimenez, J. L.: Secondary
organic aerosol formation and primary organic aerosol oxidation from biomass-burning smoke in a flow reactor during
FLAME-3, Atmos. Chem. Phys., 13, 11551–11571, <ext-link xlink:href="https://doi.org/10.5194/acp-13-11551-2013" ext-link-type="DOI">10.5194/acp-13-11551-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib49"><label>49</label><mixed-citation>Pagonis, D., Krechmer, J. E., de Gouw, J., Jimenez, J. L., and Ziemann, P. J.: Effects of gas-wall partitioning in Teflon tubing
and instrumentation on time-resolved measurements of gas-phase organic compounds, Atmos. Meas. Tech., 10, 4687–4696,
<ext-link xlink:href="https://doi.org/10.5194/amt-10-4687-2017" ext-link-type="DOI">10.5194/amt-10-4687-2017</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib50"><label>50</label><mixed-citation>Pankow, J. F.: An Absorption-Model of Gas-Particle Partitioning of
Organic-Compounds in the Atmosphere, Atmos. Environ., 28, 185–188, <ext-link xlink:href="https://doi.org/10.1016/1352-2310(94)90093-0" ext-link-type="DOI">10.1016/1352-2310(94)90093-0</ext-link>, 1994.</mixed-citation></ref>
      <ref id="bib1.bib51"><label>51</label><mixed-citation>Paolini, V., Guerriero, E., Bacaloni, A., Rotatori, M., Benedetti, P., and
Mosca, S.: Simultaneous Sampling of Vapor and Particle-Phase Carcinogenic
Polycyclic Aromatic Hydrocarbons on Functionalized Glass Fiber Filters,
Aerosol Air Qual. Res., 16, 175–183, <ext-link xlink:href="https://doi.org/10.4209/aaqr.2015.07.0476" ext-link-type="DOI">10.4209/aaqr.2015.07.0476</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib52"><label>52</label><mixed-citation>Robinson, A. L., Donahue, N. M., Shrivastava, M. K., Weitkamp, E. A., Sage,
A. M., Grieshop, A. P., Lane, T. E., Pierce, J. R., and Pandis, S. N.:
Rethinking organic aerosols: Semivolatile emissions and photochemical aging,
Science, 315, 1259–1262, <ext-link xlink:href="https://doi.org/10.1126/science.1133061" ext-link-type="DOI">10.1126/science.1133061</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib53"><label>53</label><mixed-citation>Sanchez, C., Carlsson, H., Colmsjo, A., Crescenzi, C., and Batlle, R.:
Determination of nitroaromatic compounds in air samples at femtogram level
using C-18 membrane sampling and on-line extraction with LC-MS, Anal. Chem.,
75, 4639–4645, <ext-link xlink:href="https://doi.org/10.1021/ac034278w" ext-link-type="DOI">10.1021/ac034278w</ext-link>, 2003.</mixed-citation></ref>
      <ref id="bib1.bib54"><label>54</label><mixed-citation>
Sauret-Szezepanki, N. and Lane, D. A.: Smog chamber study of acenaphthene:
Gas/particle partition measurements of the products formed by reaction with
the OH radical, Polycycl. Aromat. Comp., 24, 161–172,
10.1080/10406630490460610, 2004.</mixed-citation></ref>
      <ref id="bib1.bib55"><label>55</label><mixed-citation>
Schauer, J. J., Kleeman, M. J., Cass, G. R., and Simoneit, B. R. T.:
Measurement of emissions from air pollution sources. 3. C-1-C-29 organic
compounds from fireplace combustion of wood, Environ. Sci. Technol., 35,
1716–1728, 2001.</mixed-citation></ref>
      <ref id="bib1.bib56"><label>56</label><mixed-citation>Schmarr, H. G. and Bernhardt, J.: Profiling analysis of volatile compounds
from fruits using comprehensive two-dimensional gas chromatography and image
processing techniques, J. Chromatogr. A, 1217, 565–574,
<ext-link xlink:href="https://doi.org/10.1016/j.chroma.2009.11.063" ext-link-type="DOI">10.1016/j.chroma.2009.11.063</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib57"><label>57</label><mixed-citation>Sekimoto, K., Koss, A. R., Gilman, J. B., Selimovic, V., Coggon, M. M., Zarzana, K. J., Yuan, B., Lerner, B. M., Brown, S. S.,
Warneke, C., Yokelson, R. J., Roberts, J. M., and de Gouw, J.: High- and low-temperature pyrolysis profiles describe volatile
organic compound emissions from western US wildfire fuels, Atmos. Chem. Phys., 18, 9263–9281, <ext-link xlink:href="https://doi.org/10.5194/acp-18-9263-2018" ext-link-type="DOI">10.5194/acp-18-9263-2018</ext-link>, 2018.</mixed-citation></ref>
      <ref id="bib1.bib58"><label>58</label><mixed-citation>Selimovic, V., Yokelson, R. J., Warneke, C., Roberts, J. M., de Gouw, J., Reardon, J., and Griffith, D. W. T.: Aerosol optical
properties and trace gas emissions by PAX and OP-FTIR for laboratory-simulated western US wildfires during FIREX,
Atmos. Chem. Phys., 18, 2929–2948, <ext-link xlink:href="https://doi.org/10.5194/acp-18-2929-2018" ext-link-type="DOI">10.5194/acp-18-2929-2018</ext-link>, 2018.</mixed-citation></ref>
      <ref id="bib1.bib59"><label>59</label><mixed-citation>Smith, J. D., Kinney, H., and Anastasio, C.: Aqueous benzene-diols react
with an organic triplet excited state and hydroxyl radical to form secondary
organic aerosol, Phys. Chem. Chem. Phys., 17, 10227–10237, <ext-link xlink:href="https://doi.org/10.1039/c4cp06095d" ext-link-type="DOI">10.1039/c4cp06095d</ext-link>,
2015.</mixed-citation></ref>
      <ref id="bib1.bib60"><label>60</label><mixed-citation>Stuff, J. R., Cheicante, R. L., Durst, H. D., and Ruth, J. L.: Detection of
the chemical warfare agents bis-(2-chloroethyl)ethylamine (HN-1) and
tris-(2-chloroethyl)amine (HN-3) in air, J. Chromatogr. A., 849, 529–540,
<ext-link xlink:href="https://doi.org/10.1016/S0021-9673(99)00585-3" ext-link-type="DOI">10.1016/S0021-9673(99)00585-3</ext-link>, 1999.</mixed-citation></ref>
      <ref id="bib1.bib61"><label>61</label><mixed-citation>Tkacik, D. S., Presto, A. A., Donahue, N. M., and Robinson, A. L.: Secondary
Organic Aerosol Formation from Intermediate-Volatility Organic Compounds:
Cyclic, Linear, and Branched Alkanes, Environ. Sci. Technol., 46, 8773–8781,
<ext-link xlink:href="https://doi.org/10.1021/es301112c" ext-link-type="DOI">10.1021/es301112c</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib62"><label>62</label><mixed-citation>Tkacik, D. S., Robinson, E. S., Ahern, A., Saleh, R., Stockwell, C., Veres,
P., Simpson, I. J., Meinardi, S., Blake, D. R., Yokelson, R. J., Presto, A.
A., Sullivan, R. C., Donahue, N. M., and Robinson, A. L.: A dual-chamber
method for quantifying the effects of atmospheric perturbations on secondary
organic aerosol formation from biomass burning emissions, J.
Geophys. Res.-Atmos., 122, 6043–6058, <ext-link xlink:href="https://doi.org/10.1002/2016JD025784" ext-link-type="DOI">10.1002/2016JD025784</ext-link>,
2017.</mixed-citation></ref>
      <ref id="bib1.bib63"><label>63</label><mixed-citation>Tollback, J., Tamburro, D., Crescenzi, C., and Carlsson, H.: Air sampling
with Empore solid phase extraction membranes and online single-channel
desorption/liquid chromatography/mass spectrometry analysis: Determination
of volatile and semi-volatile organophosphate esters, J. Chromatogr. A, 1129,
1–8, <ext-link xlink:href="https://doi.org/10.1016/j.chroma.2006.05.086" ext-link-type="DOI">10.1016/j.chroma.2006.05.086</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib64"><label>64</label><mixed-citation>Verevkin, S. P. and Kozlova, S. A.: Di-hydroxybenzenes: Catechol,
resorcinol, and hydroquinone – Enthalpies of phase transitions revisited,
Thermochim. Acta, 471, 33–42, <ext-link xlink:href="https://doi.org/10.1016/j.tca.2008.02.016" ext-link-type="DOI">10.1016/j.tca.2008.02.016</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib65"><label>65</label><mixed-citation>Worton, D. R., Decker, M., Isaacman-VanWertz, G., Chan, A. W. H., Wilson, K.
R., and Goldstein, A. H.: Improved molecular level identification of organic
compounds using comprehensive two-dimensional chromatography, dual
ionization energies and high resolution mass spectrometry, Analyst, 142,
2395–2403, <ext-link xlink:href="https://doi.org/10.1039/C7AN00625J" ext-link-type="DOI">10.1039/C7AN00625J</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib66"><label>66</label><mixed-citation>Yee, L. D., Kautzman, K. E., Loza, C. L., Schilling, K. A., Coggon, M. M., Chhabra, P. S., Chan, M. N., Chan, A. W.<?pagebreak page17817?> H.,
Hersey, S. P., Crounse, J. D., Wennberg, P. O., Flagan, R. C., and Seinfeld, J. H.: Secondary organic aerosol formation
from biomass burning intermediates: phenol and methoxyphenols, Atmos. Chem. Phys., 13, 8019–8043, <ext-link xlink:href="https://doi.org/10.5194/acp-13-8019-2013" ext-link-type="DOI">10.5194/acp-13-8019-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib67"><label>67</label><mixed-citation>
Yokelson, R. J., Griffith, D. W. T., and Ward, D. E.: Open-path Fourier
transform infrared studies of large-scale laboratory biomass fires, J.
Geophys. Res.-Atmos., 101, 21067–21080, 1996.</mixed-citation></ref>
      <ref id="bib1.bib68"><label>68</label><mixed-citation>Yokelson, R. J., Crounse, J. D., DeCarlo, P. F., Karl, T., Urbanski, S., Atlas, E., Campos, T., Shinozuka, Y., Kapustin, V.,
Clarke, A. D., Weinheimer, A., Knapp, D. J., Montzka, D. D., Holloway, J., Weibring, P., Flocke, F., Zheng, W., Toohey, D.,
Wennberg, P. O., Wiedinmyer, C., Mauldin, L., Fried, A., Richter, D., Walega, J., Jimenez, J. L., Adachi, K., Buseck, P. R.,
Hall, S. R., and Shetter, R.: Emissions from biomass burning in the Yucatan, Atmos. Chem. Phys., 9, 5785–5812, <ext-link xlink:href="https://doi.org/10.5194/acp-9-5785-2009" ext-link-type="DOI">10.5194/acp-9-5785-2009</ext-link>, 2009.
</mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bib69"><label>69</label><mixed-citation>Zhao, Y., Hennigan, C. J., May, A. A., Tkacik, D. S., de Gouw, J. A.,
Gilman, J. B., Kuster, W. C., Borbon, A., and Robinson, A. L.:
Intermediate-Volatility Organic Compounds: A Large Source of Secondary
Organic Aerosol, Environ. Sci. Technol., 48, 13743–13750, <ext-link xlink:href="https://doi.org/10.1021/es5035188" ext-link-type="DOI">10.1021/es5035188</ext-link>,
2014.</mixed-citation></ref>
      <ref id="bib1.bib70"><label>70</label><mixed-citation>Zhao, Y., Nguyen, N. T., Presto, A. A., Hennigan, C. J., May, A. A., and
Robinson, A. L.: Intermediate Volatility Organic Compound Emissions from
On-Road Gasoline Vehicles and Small Off-Road Gasoline Engines, Environ. Sci.
Technol., 4554–4563, <ext-link xlink:href="https://doi.org/10.1021/acs.est.5b06247" ext-link-type="DOI">10.1021/acs.est.5b06247</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib71"><label>71</label><mixed-citation>
Ziemann, P. J.: Effects of molecular structure on the chemistry of aerosol
formation from the OH-radical-initiated oxidation of alkanes and alkenes,
Int. Rev. Phys. Chem., 30, 161–195, 2011.</mixed-citation></ref>

  </ref-list></back>
    <!--<article-title-html>Measurements of I/SVOCs in biomass-burning smoke using solid-phase extraction disks and two-dimensional gas chromatography</article-title-html>
<abstract-html><p>Biomass-burning organic-aerosol (OA) emissions are known
to exhibit semi-volatile behavior that impacts OA loading during plume
transport. Because such semi-volatile behavior depends in part on OA
composition, improved speciation of intermediate and semi-volatile organic
compounds (I/SVOCs) emitted during fires is needed to assess the competing
effects of primary OA volatilization and secondary OA production. In this
study, 18 laboratory fires were sampled in which a range of fuel types were
burned. Emitted I/SVOCs were collected onto Teflon filters and solid-phase
extraction (SPE) disks to qualitatively characterize particulate and gaseous
I/SVOCs, respectively. Derivatized filter extracts were analyzed using
comprehensive two-dimensional gas chromatography with time-of-flight mass
spectrometry (GC&thinsp; × &thinsp;GC-TOFMS). Quality control tests were performed
using biomass-burning relevant standards and demonstrate the utility of SPE
disks for untargeted analysis of air samples. The observed chromatographic
profiles of I/SVOCs in coniferous fuel-derived smoke samples were well
correlated with each other, but poorly correlated with other fuel types
(e.g., herbaceous and chaparral fuels). Emissions of benzenediol isomers
were also shown to be fuel dependent. The combined Teflon and SPE filter
data captured differences in gas-particle partitioning of the benzenediol
isomers, with hydroquinone having a significantly higher particle-phase
fraction than catechol due to its lower volatility. Additionally, the
speciated volatility distribution of I/SVOCs in smoke from a rotten-log fire
was estimated to evaluate the composition of potentially volatilized primary
OA, which was entirely attributed to oxygenated (or other heteroatomic)
compounds. The isomer-dependent partitioning and the speciated volatility
distributions both suggest the need for better understanding of gas-phase
and heterogenous reaction pathways of biomass-burning-derived I/SVOCs in
order to represent the atmospheric chemistry of smoke in models.</p></abstract-html>
<ref-html id="bib1.bib1"><label>1</label><mixed-citation>
Akagi, S. K., Yokelson, R. J., Wiedinmyer, C., Alvarado, M. J., Reid, J. S., Karl, T., Crounse, J. D., and Wennberg, P. O.:
Emission factors for open and domestic biomass burning for use in atmospheric models, Atmos. Chem. Phys., 11, 4039–4072, <a href="https://doi.org/10.5194/acp-11-4039-2011" target="_blank">https://doi.org/10.5194/acp-11-4039-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>2</label><mixed-citation>
Akagi, S. K., Craven, J. S., Taylor, J. W., McMeeking, G. R., Yokelson, R. J., Burling, I. R., Urbanski, S. P., Wold, C. E.,
Seinfeld, J. H., Coe, H., Alvarado, M. J., and Weise, D. R.: Evolution of trace gases and particles emitted by a chaparral fire
in California, Atmos. Chem. Phys., 12, 1397–1421, <a href="https://doi.org/10.5194/acp-12-1397-2012" target="_blank">https://doi.org/10.5194/acp-12-1397-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>3</label><mixed-citation>
Andreae, M. O. and Merlet, P.: Emission of trace gases and aerosols from
biomass burning, Global Biogeochem. Cy., 15, 955–966, 2001.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>4</label><mixed-citation>
Bian, Q., Jathar, S. H., Kodros, J. K., Barsanti, K. C., Hatch, L. E., May, A. A., Kreidenweis, S. M., and Pierce, J. R.:
Secondary organic aerosol formation in biomass-burning plumes: theoretical analysis of lab studies and ambient plumes,
Atmos. Chem. Phys., 17, 5459–5475, <a href="https://doi.org/10.5194/acp-17-5459-2017" target="_blank">https://doi.org/10.5194/acp-17-5459-2017</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>5</label><mixed-citation>
Bond, T. C., Streets, D. G., Yarber, K. F., Nelson, S. M., Woo, J. H., and
Klimont, Z.: A technology-based global inventory of black and organic carbon
emissions from combustion, J. Geophys. Res.-Atmos., 109,  D14203,
<a href="https://doi.org/10.1029/2003jd003697" target="_blank">https://doi.org/10.1029/2003jd003697</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>6</label><mixed-citation>
Booth, A. M., Montague, W. J., Barley, M. H., Topping, D. O., McFiggans, G., Garforth, A., and Percival, C. J.: Solid state
and sub-cooled liquid vapour pressures of cyclic aliphatic dicarboxylic acids, Atmos. Chem. Phys., 11, 655–665, <a href="https://doi.org/10.5194/acp-11-655-2011" target="_blank">https://doi.org/10.5194/acp-11-655-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>7</label><mixed-citation>
Burgess, D. R.: Thermochemical Data, in: NIST Chemistry WebBook, NIST
Standard Reference Database Number 69, edited by: Linstrom, P. J. and
Mallard, W. G., National Institute of Standards and Technology,
Gaithersburg, MD, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>8</label><mixed-citation>
Capes, G., Johnson, B., McFiggans, G., Williams, P. I., Haywood, J., and
Coe, H.: Aging of biomass burning aerosols over West Africa: Aircraft
measurements of chemical composition, microphysical properties, and emission
ratios, J. Geophys. Res.-Atmos., 113,  D00c15,
<a href="https://doi.org/10.1029/2008jd009845" target="_blank">https://doi.org/10.1029/2008jd009845</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>9</label><mixed-citation>
Capouet, M. and Müller, J.-F.: A group contribution method for estimating the vapour pressures of a-pinene oxidation products, Atmos. Chem. Phys., 6,
1455–1467, <a href="https://doi.org/10.5194/acp-6-1455-2006" target="_blank">https://doi.org/10.5194/acp-6-1455-2006</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>10</label><mixed-citation>
Christian, T. J., Kleiss, B., Yokelson, R. J., Holzinger, R., Crutzen, P.
J., Hao, W. M., Shirai, T., and Blake, D. R.: Comprehensive laboratory
measurements of biomass-burning emissions: 2. First intercomparison of
open-path FTIR, PTR-MS, and GC- MS/FID/ECD, J. Geophys. Res.-Atmos., 109,
D02311, <a href="https://doi.org/10.1029/2003jd003874" target="_blank">https://doi.org/10.1029/2003jd003874</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>11</label><mixed-citation>
Cubison, M. J., Ortega, A. M., Hayes, P. L., Farmer, D. K., Day, D., Lechner, M. J., Brune, W. H., Apel, E., Diskin, G. S.,
Fisher, J. A., Fuelberg, H. E., Hecobian, A., Knapp, D. J., Mikoviny, T., Riemer, D., Sachse, G. W., Sessions, W., Weber, R. J.,
Weinheimer, A. J., Wisthaler, A., and Jimenez, J. L.: Effects of aging on organic aerosol from open biomass burning smoke in
aircraft and laboratory studies, Atmos. Chem. Phys., 11, 12049–12064, <a href="https://doi.org/10.5194/acp-11-12049-2011" target="_blank">https://doi.org/10.5194/acp-11-12049-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>12</label><mixed-citation>
DeCarlo, P. F., Ulbrich, I. M., Crounse, J., de Foy, B., Dunlea, E. J., Aiken, A. C., Knapp, D., Weinheimer, A. J., Campos, T.,
Wennberg, P. O., and Jimenez, J. L.: Investigation of the sources and processing of organic aerosol over the Central Mexican
Plateau from aircraft measurements during MILAGRO, Atmos. Chem. Phys., 10, 5257–5280, <a href="https://doi.org/10.5194/acp-10-5257-2010" target="_blank">https://doi.org/10.5194/acp-10-5257-2010</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>13</label><mixed-citation>
Dettmer-Wilde, K. and Engewald, W. (Eds.): Practical Gas Chromatography: A
Comprehensive Reference, Springer-Verlag, Heidelberg, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>14</label><mixed-citation>
Dhammapala, R., Claiborn, C., Jimenez, J., Corkill, J., Gullett, B.,
Simpson, C., and Paulsen, M.: Emission factors of PAHs, methoxyphenols,
levoglucosan, elemental carbon and organic carbon from simulated wheat and
Kentucky bluegrass stubble burns, Atmos. Environ., 41, 2660–2669,
<a href="https://doi.org/10.1016/j.atmosenv.2006.11.023" target="_blank">https://doi.org/10.1016/j.atmosenv.2006.11.023</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>15</label><mixed-citation>
Donahue, N. M., Robinson, A. L., Stanier, C. O., and Pandis, S. N.: Coupled
partitioning, dilution, and chemical aging of semivolatile organics,
Environ. Sci. Technol., 40, 2635–2643, <a href="https://doi.org/10.1021/Es052297c" target="_blank">https://doi.org/10.1021/Es052297c</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>16</label><mixed-citation>
Donahue, N. M., Robinson, A. L., and Pandis, S. N.: Atmospheric organic
particulate matter: From smoke to secondary organic aerosol, Atmos.
Environ., 43, 94–106, <a href="https://doi.org/10.1016/j.atmosenv.2008.09.055" target="_blank">https://doi.org/10.1016/j.atmosenv.2008.09.055</a>, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>17</label><mixed-citation>
Erger, C. and Schmidt, T. C.: Disk-based solid-phase extraction analysis of
organic substances in water, Trac-Trend. Anal. Chem., 61, 74–82,
<a href="https://doi.org/10.1016/j.trac.2014.05.006" target="_blank">https://doi.org/10.1016/j.trac.2014.05.006</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>18</label><mixed-citation>
Finewax, Z., de Gouw, J. A., and Ziemann, P. J.: Identification and
Quantification of 4-Nitrocatechol Formed from OH and NO3 Radical-Initiated
Reactions of Catechol in Air in the Presence of NOx: Implications for
Secondary Organic Aerosol Formation from Biomass Burning, Environ. Sci.
Technol., 52, 1981–1989, <a href="https://doi.org/10.1021/acs.est.7b05864" target="_blank">https://doi.org/10.1021/acs.est.7b05864</a>, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>19</label><mixed-citation>
Galarneau, E., Harner, T., Shoeib, M., Kozma, M., and Lane, D.: A
preliminary investigation of sorbent-impregnated filters (SIFs) as an
alternative to polyurethane foam (PUF) for sampling gas-phase semivolatile
organic compounds in air, Atmos. Environ., 40, 5734–5740,
<a href="https://doi.org/10.1016/j.atmosenv.2006.05.060" target="_blank">https://doi.org/10.1016/j.atmosenv.2006.05.060</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>20</label><mixed-citation>
Gaston, C. J., Lopez-Hilfiker, F. D., Whybrew, L. E., Hadley, O., McNair,
F., Gao, H. L., Jaffe, D. A., and Thornton, J. A.: Online molecular
characterization of fine particulate matter in Port Angeles, WA: Evidence
for a major impact from residential wood smoke, Atmos. Environ., 138,
99–107, <a href="https://doi.org/10.1016/j.atmosenv.2016.05.013" target="_blank">https://doi.org/10.1016/j.atmosenv.2016.05.013</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>21</label><mixed-citation>
George, I. J., Black, R. R., Geron, C. D., Aurell, J., Hays, M. D., Preston,
W. T., and Gullett, B. K.: Volatile and semivolatile organic compounds in
laboratory peat fire emissions, Atmos. Environ., 132, 163–170,
<a href="https://doi.org/10.1016/j.atmosenv.2016.02.025" target="_blank">https://doi.org/10.1016/j.atmosenv.2016.02.025</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>22</label><mixed-citation>
Grieshop, A. P., Logue, J. M., Donahue, N. M., and Robinson, A. L.: Laboratory investigation of photochemical oxidation of organic
aerosol from wood fires 1: measurement and simulation of organic aerosol evolution, Atmos. Chem. Phys., 9, 1263–1277, <a href="https://doi.org/10.5194/acp-9-1263-2009" target="_blank">https://doi.org/10.5194/acp-9-1263-2009</a>, 2009a.
</mixed-citation></ref-html>
<ref-html id="bib1.bib23"><label>23</label><mixed-citation>
Grieshop, A. P., Miracolo, M. A., Donahue, N. M., and Robinson, A. L.:
Constraining the Volatility Distribution and Gas-Particle Partitioning of
Combustion Aerosols Using Isothermal Dilution and Thermodenuder
Measurements, Environ. Sci. Technol., 43, 4750–4756, <a href="https://doi.org/10.1021/Es8032378" target="_blank">https://doi.org/10.1021/Es8032378</a>,
2009b.
</mixed-citation></ref-html>
<ref-html id="bib1.bib24"><label>24</label><mixed-citation>
Hatch, L. E., Luo, W., Pankow, J. F., Yokelson, R. J., Stockwell, C. E., and Barsanti, K. C.: Identification and quantification
of gaseous organic compounds emitted from biomass burning using two-dimensional gas chromatography-time-of-flight mass spectrometry,
Atmos. Chem. Phys., 15, 1865–1899, <a href="https://doi.org/10.5194/acp-15-1865-2015" target="_blank">https://doi.org/10.5194/acp-15-1865-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib25"><label>25</label><mixed-citation>
Hatch, L. E., Yokelson, R. J., Stockwell, C. E., Veres, P. R., Simpson, I. J., Blake, D. R., Orlando, J. J., and Barsanti, K. C.:
Multi-instrument comparison and compilation of non-methane organic gas emissions from biomass burning and implications
for smoke-derived secondary organic aerosol precursors, Atmos. Chem. Phys., 17, 1471–1489, <a href="https://doi.org/10.5194/acp-17-1471-2017" target="_blank">https://doi.org/10.5194/acp-17-1471-2017</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib26"><label>26</label><mixed-citation>
Hays, M. D., Geron, C. D., Linna, K. J., Smith, N. D., and Schauer, J. J.:
Speciation of gas-phase and fine particle emissions from burning of foliar
fuels, Environ. Sci. Technol., 36, 2281–2295, 2002.
</mixed-citation></ref-html>
<ref-html id="bib1.bib27"><label>27</label><mixed-citation>
Hennigan, C. J., Miracolo, M. A., Engelhart, G. J., May, A. A., Presto, A. A., Lee, T., Sullivan, A. P., McMeeking, G. R.,
Coe, H., Wold, C. E., Hao, W.-M., Gilman, J. B., Kuster, W. C., de Gouw, J., Schichtel, B. A., Collett Jr., J. L.,
Kreidenweis, S. M., and Robinson, A. L.: Chemical and physical transformations of organic aerosol from the photo-oxidation of
open biomass burning emissions in an environmental chamber, Atmos. Chem. Phys., 11, 7669–7686, <a href="https://doi.org/10.5194/acp-11-7669-2011" target="_blank">https://doi.org/10.5194/acp-11-7669-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib28"><label>28</label><mixed-citation>
Hobbs, P. V., Reid, J. S., Kotchenruther, R. A., Ferek, R. J., and Weiss,
R.: Direct radiative forcing by smoke from biomass burning, Science, 275,
1776–1778, 1997.
</mixed-citation></ref-html>
<ref-html id="bib1.bib29"><label>29</label><mixed-citation>
Jayarathne, T., Stockwell, C. E., Gilbert, A. A., Daugherty, K., Cochrane, M. A., Ryan, K. C., Putra, E. I., Saharjo, B. H.,
Nurhayati, A. D., Albar, I., Yokelson, R. J., and Stone, E. A.: Chemical characterization of fine particulate matter emitted
by peat fires in Central Kalimantan, Indonesia, during the 2015 El Niño, Atmos. Chem. Phys., 18, 2585–2600, <a href="https://doi.org/10.5194/acp-18-2585-2018" target="_blank">https://doi.org/10.5194/acp-18-2585-2018</a>, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib30"><label>30</label><mixed-citation>
Jen, C. N., Hatch, L. E., Selimovic, V., Yokelson, R. J., Weber, R.,
Fernandez, A. E., Kreisberg, N. M., Barsanti, K. C., and Goldstein, A. H.:
Speciated and total emission factors of particulate organics from burning
western U.S. wildland fuels and their dependence on combustion efficiency,
Atmos. Chem. Phys. Discuss., submitted, 2018a.
</mixed-citation></ref-html>
<ref-html id="bib1.bib31"><label>31</label><mixed-citation>
Jen, C. N., Liang, Y. T., Hatch, L. E., Kreisberg, N. M., Stamatis, C.,
Kristensen, K., Battles, J. J., Stephens, S. L., York, R. A., Barsanti, K.
C., and Goldstein, A. H.: High Hydroquinone Emissions from Burning
Manzanita, Environ. Sci. Tech. Let., 5, 309–314, <a href="https://doi.org/10.1021/acs.estlett.8b00222" target="_blank">https://doi.org/10.1021/acs.estlett.8b00222</a>,
2018b.
</mixed-citation></ref-html>
<ref-html id="bib1.bib32"><label>32</label><mixed-citation>
Jolleys, M. D., Coe, H., McFiggans, G., Capes, G., Allan, J. D., Crosier,
J., Williams, P. I., Allen, G., Bower, K. N., Jimenez, J. L., Russell, L.
M., Grutter, M., and Baumgardner, D.: Characterizing the aging of biomass
burning organic aerosol by use of mixing ratios: A meta-analysis of four
regions, Environ. Sci. Technol., 46, 13093–13102, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib33"><label>33</label><mixed-citation>
Koss, A. R., Sekimoto, K., Gilman, J. B., Selimovic, V., Coggon, M. M., Zarzana, K. J., Yuan, B., Lerner, B. M.,
Brown, S. S., Jimenez, J. L., Krechmer, J., Roberts, J. M., Warneke, C., Yokelson, R. J., and de Gouw, J.:
Non-methane organic gas emissions from biomass burning: identification, quantification, and emission factors from
PTR-ToF during the FIREX 2016 laboratory experiment, Atmos. Chem. Phys., 18, 3299–3319, <a href="https://doi.org/10.5194/acp-18-3299-2018" target="_blank">https://doi.org/10.5194/acp-18-3299-2018</a>, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib34"><label>34</label><mixed-citation>
Kunzli, N., Avol, E., Wu, J., Gauderman, W. J., Rappaport, E., and
Millstein, J.: Health effects of the 2003 Southern California wildfires on
children, Am. J. Resp. Crit. Care, 174, 1221–1228, <a href="https://doi.org/10.1164/rccm.200604-519OC" target="_blank">https://doi.org/10.1164/rccm.200604-519OC</a>,
2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib35"><label>35</label><mixed-citation>
Lai, Z. and Fiehn, O.: Mass spectral fragmentation of trimethylsilylated
small molecules, Mass Spectrom. Rev., 37, 245–257, <a href="https://doi.org/10.1002/mas.21518" target="_blank">https://doi.org/10.1002/mas.21518</a>,
2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib36"><label>36</label><mixed-citation>
Li, Y., Pöschl, U., and Shiraiwa, M.: Molecular corridors and parameterizations of volatility in the chemical evolution of
organic aerosols, Atmos. Chem. Phys., 16, 3327–3344, <a href="https://doi.org/10.5194/acp-16-3327-2016" target="_blank">https://doi.org/10.5194/acp-16-3327-2016</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib37"><label>37</label><mixed-citation>
Liu, J. C., Pereira, G., Uhl, S. A., Bravo, M. A., and Bell, M. L.: A
systematic review of the physical health impacts from non-occupational
exposure to wildfire smoke, Environ. Res., 136, 120–132, <a href="https://doi.org/10.1016/j.envres.2014.10.015" target="_blank">https://doi.org/10.1016/j.envres.2014.10.015</a>,
2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib38"><label>38</label><mixed-citation>
Liu, Y. Q., Goodrick, S., and Heilman, W.: Wildland fire emissions, carbon,
and climate: Wildfire-climate interactions, Forest Ecol. Manag., 317, 80–96,
10.1016/j.foreco.2013.02.020, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib39"><label>39</label><mixed-citation>
Mader, B. T. and Pankow, J. F.: Gas/solid partitioning of semivolatile
organic compounds (SOCs) to air filters. 3. An analysis of gas adsorption
artifacts in measurements of atmospheric SOCs and organic carbon (OC) when
using Teflon membrane filters and quartz fiber filters, Environ. Sci.
Technol., 35, 3422–3432, <a href="https://doi.org/10.1021/es0015951" target="_blank">https://doi.org/10.1021/es0015951</a>, 2001.
</mixed-citation></ref-html>
<ref-html id="bib1.bib40"><label>40</label><mixed-citation>
May, A. A., Saleh, R., Hennigan, C. J., Donahue, N. M., and Robinson, A. L.:
Volatility of Organic Molecular Markers Used for Source Apportionment
Analysis: Measurements and Implications for Atmospheric Lifetime, Environ.
Sci. Technol., 46, 12435–12444, <a href="https://doi.org/10.1021/es302276t" target="_blank">https://doi.org/10.1021/es302276t</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib41"><label>41</label><mixed-citation>
May, A. A., Levin, E. J. T., Hennigan, C. J., Riipinen, I., Lee, T.,
Collett, J. L., Jimenez, J. L., Kreidenweis, S. M., and Robinson, A. L.:
Gas-particle partitioning of primary organic aerosol emissions: 3. Biomass
burning, J. Geophys. Res.-Atmos., 118, 11327–11338, <a href="https://doi.org/10.1002/jgrd.50828" target="_blank">https://doi.org/10.1002/jgrd.50828</a>,
2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib42"><label>42</label><mixed-citation>
May, A. A., Lee, T., McMeeking, G. R., Akagi, S., Sullivan, A. P., Urbanski, S., Yokelson, R. J., and Kreidenweis, S. M.:
Observations and analysis of organic aerosol evolution in some prescribed fire smoke plumes, Atmos. Chem. Phys., 15,
6323–6335, <a href="https://doi.org/10.5194/acp-15-6323-2015" target="_blank">https://doi.org/10.5194/acp-15-6323-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib43"><label>43</label><mixed-citation>
Mazzoleni, L. R., Zielinska, B., and Moosmuller, H.: Emissions of
levoglucosan, methoxy phenols, and organic acids from prescribed burns,
laboratory combustion of wildland fuels, and residential wood combustion,
Environ. Sci. Technol., 41, 2115–2122, <a href="https://doi.org/10.1021/es061702c" target="_blank">https://doi.org/10.1021/es061702c</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib44"><label>44</label><mixed-citation>
McDonald, J. D., Zielinska, B., Fujita, E. M., Sagebiel, J. C., Chow, J. C.,
and Watson, J. G.: Fine particle and gaseous emission rates from residential
wood combustion, Environ. Sci. Technol., 34, 2080–2091, <a href="https://doi.org/10.1021/es9909632" target="_blank">https://doi.org/10.1021/es9909632</a>, 2000.
</mixed-citation></ref-html>
<ref-html id="bib1.bib45"><label>45</label><mixed-citation>
Naeher, L. P., Brauer, M., Lipsett, M., Zelikoff, J. T., Simpson, C. D.,
Koenig, J. Q., and Smith, K. R.: Woodsmoke Health Effects: A Review,
Inhal. Toxicol., 19, 67–106, <a href="https://doi.org/10.1080/08958370600985875" target="_blank">https://doi.org/10.1080/08958370600985875</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib46"><label>46</label><mixed-citation>
Nakao, S., Clark, C., Tang, P., Sato, K., and Cocker III, D.: Secondary organic aerosol formation from phenolic compounds
in the absence of NO<sub>x</sub>, Atmos. Chem. Phys., 11, 10649–10660, <a href="https://doi.org/10.5194/acp-11-10649-2011" target="_blank">https://doi.org/10.5194/acp-11-10649-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib47"><label>47</label><mixed-citation>
NOAA: FIREX data archive,
<a href="https://esrl.noaa.gov/csd/groups/csd7/measurements/2016firex/FireLab/DataDownload/" target="_blank">https://esrl.noaa.gov/csd/groups/csd7/measurements/2016firex/FireLab/DataDownload/</a>,
last access: 9 October 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib48"><label>48</label><mixed-citation>
Ortega, A. M., Day, D. A., Cubison, M. J., Brune, W. H., Bon, D., de Gouw, J. A., and Jimenez, J. L.: Secondary
organic aerosol formation and primary organic aerosol oxidation from biomass-burning smoke in a flow reactor during
FLAME-3, Atmos. Chem. Phys., 13, 11551–11571, <a href="https://doi.org/10.5194/acp-13-11551-2013" target="_blank">https://doi.org/10.5194/acp-13-11551-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib49"><label>49</label><mixed-citation>
Pagonis, D., Krechmer, J. E., de Gouw, J., Jimenez, J. L., and Ziemann, P. J.: Effects of gas-wall partitioning in Teflon tubing
and instrumentation on time-resolved measurements of gas-phase organic compounds, Atmos. Meas. Tech., 10, 4687–4696,
<a href="https://doi.org/10.5194/amt-10-4687-2017" target="_blank">https://doi.org/10.5194/amt-10-4687-2017</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib50"><label>50</label><mixed-citation>
Pankow, J. F.: An Absorption-Model of Gas-Particle Partitioning of
Organic-Compounds in the Atmosphere, Atmos. Environ., 28, 185–188, <a href="https://doi.org/10.1016/1352-2310(94)90093-0" target="_blank">https://doi.org/10.1016/1352-2310(94)90093-0</a>, 1994.
</mixed-citation></ref-html>
<ref-html id="bib1.bib51"><label>51</label><mixed-citation>
Paolini, V., Guerriero, E., Bacaloni, A., Rotatori, M., Benedetti, P., and
Mosca, S.: Simultaneous Sampling of Vapor and Particle-Phase Carcinogenic
Polycyclic Aromatic Hydrocarbons on Functionalized Glass Fiber Filters,
Aerosol Air Qual. Res., 16, 175–183, <a href="https://doi.org/10.4209/aaqr.2015.07.0476" target="_blank">https://doi.org/10.4209/aaqr.2015.07.0476</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib52"><label>52</label><mixed-citation>
Robinson, A. L., Donahue, N. M., Shrivastava, M. K., Weitkamp, E. A., Sage,
A. M., Grieshop, A. P., Lane, T. E., Pierce, J. R., and Pandis, S. N.:
Rethinking organic aerosols: Semivolatile emissions and photochemical aging,
Science, 315, 1259–1262, <a href="https://doi.org/10.1126/science.1133061" target="_blank">https://doi.org/10.1126/science.1133061</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib53"><label>53</label><mixed-citation>
Sanchez, C., Carlsson, H., Colmsjo, A., Crescenzi, C., and Batlle, R.:
Determination of nitroaromatic compounds in air samples at femtogram level
using C-18 membrane sampling and on-line extraction with LC-MS, Anal. Chem.,
75, 4639–4645, <a href="https://doi.org/10.1021/ac034278w" target="_blank">https://doi.org/10.1021/ac034278w</a>, 2003.
</mixed-citation></ref-html>
<ref-html id="bib1.bib54"><label>54</label><mixed-citation>
Sauret-Szezepanki, N. and Lane, D. A.: Smog chamber study of acenaphthene:
Gas/particle partition measurements of the products formed by reaction with
the OH radical, Polycycl. Aromat. Comp., 24, 161–172,
10.1080/10406630490460610, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib55"><label>55</label><mixed-citation>
Schauer, J. J., Kleeman, M. J., Cass, G. R., and Simoneit, B. R. T.:
Measurement of emissions from air pollution sources. 3. C-1-C-29 organic
compounds from fireplace combustion of wood, Environ. Sci. Technol., 35,
1716–1728, 2001.
</mixed-citation></ref-html>
<ref-html id="bib1.bib56"><label>56</label><mixed-citation>
Schmarr, H. G. and Bernhardt, J.: Profiling analysis of volatile compounds
from fruits using comprehensive two-dimensional gas chromatography and image
processing techniques, J. Chromatogr. A, 1217, 565–574,
<a href="https://doi.org/10.1016/j.chroma.2009.11.063" target="_blank">https://doi.org/10.1016/j.chroma.2009.11.063</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib57"><label>57</label><mixed-citation>
Sekimoto, K., Koss, A. R., Gilman, J. B., Selimovic, V., Coggon, M. M., Zarzana, K. J., Yuan, B., Lerner, B. M., Brown, S. S.,
Warneke, C., Yokelson, R. J., Roberts, J. M., and de Gouw, J.: High- and low-temperature pyrolysis profiles describe volatile
organic compound emissions from western US wildfire fuels, Atmos. Chem. Phys., 18, 9263–9281, <a href="https://doi.org/10.5194/acp-18-9263-2018" target="_blank">https://doi.org/10.5194/acp-18-9263-2018</a>, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib58"><label>58</label><mixed-citation>
Selimovic, V., Yokelson, R. J., Warneke, C., Roberts, J. M., de Gouw, J., Reardon, J., and Griffith, D. W. T.: Aerosol optical
properties and trace gas emissions by PAX and OP-FTIR for laboratory-simulated western US wildfires during FIREX,
Atmos. Chem. Phys., 18, 2929–2948, <a href="https://doi.org/10.5194/acp-18-2929-2018" target="_blank">https://doi.org/10.5194/acp-18-2929-2018</a>, 2018.
</mixed-citation></ref-html>
<ref-html id="bib1.bib59"><label>59</label><mixed-citation>
Smith, J. D., Kinney, H., and Anastasio, C.: Aqueous benzene-diols react
with an organic triplet excited state and hydroxyl radical to form secondary
organic aerosol, Phys. Chem. Chem. Phys., 17, 10227–10237, <a href="https://doi.org/10.1039/c4cp06095d" target="_blank">https://doi.org/10.1039/c4cp06095d</a>,
2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib60"><label>60</label><mixed-citation>
Stuff, J. R., Cheicante, R. L., Durst, H. D., and Ruth, J. L.: Detection of
the chemical warfare agents bis-(2-chloroethyl)ethylamine (HN-1) and
tris-(2-chloroethyl)amine (HN-3) in air, J. Chromatogr. A., 849, 529–540,
<a href="https://doi.org/10.1016/S0021-9673(99)00585-3" target="_blank">https://doi.org/10.1016/S0021-9673(99)00585-3</a>, 1999.
</mixed-citation></ref-html>
<ref-html id="bib1.bib61"><label>61</label><mixed-citation>
Tkacik, D. S., Presto, A. A., Donahue, N. M., and Robinson, A. L.: Secondary
Organic Aerosol Formation from Intermediate-Volatility Organic Compounds:
Cyclic, Linear, and Branched Alkanes, Environ. Sci. Technol., 46, 8773–8781,
<a href="https://doi.org/10.1021/es301112c" target="_blank">https://doi.org/10.1021/es301112c</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib62"><label>62</label><mixed-citation>
Tkacik, D. S., Robinson, E. S., Ahern, A., Saleh, R., Stockwell, C., Veres,
P., Simpson, I. J., Meinardi, S., Blake, D. R., Yokelson, R. J., Presto, A.
A., Sullivan, R. C., Donahue, N. M., and Robinson, A. L.: A dual-chamber
method for quantifying the effects of atmospheric perturbations on secondary
organic aerosol formation from biomass burning emissions, J.
Geophys. Res.-Atmos., 122, 6043–6058, <a href="https://doi.org/10.1002/2016JD025784" target="_blank">https://doi.org/10.1002/2016JD025784</a>,
2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib63"><label>63</label><mixed-citation>
Tollback, J., Tamburro, D., Crescenzi, C., and Carlsson, H.: Air sampling
with Empore solid phase extraction membranes and online single-channel
desorption/liquid chromatography/mass spectrometry analysis: Determination
of volatile and semi-volatile organophosphate esters, J. Chromatogr. A, 1129,
1–8, <a href="https://doi.org/10.1016/j.chroma.2006.05.086" target="_blank">https://doi.org/10.1016/j.chroma.2006.05.086</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib64"><label>64</label><mixed-citation>
Verevkin, S. P. and Kozlova, S. A.: Di-hydroxybenzenes: Catechol,
resorcinol, and hydroquinone – Enthalpies of phase transitions revisited,
Thermochim. Acta, 471, 33–42, <a href="https://doi.org/10.1016/j.tca.2008.02.016" target="_blank">https://doi.org/10.1016/j.tca.2008.02.016</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib65"><label>65</label><mixed-citation>
Worton, D. R., Decker, M., Isaacman-VanWertz, G., Chan, A. W. H., Wilson, K.
R., and Goldstein, A. H.: Improved molecular level identification of organic
compounds using comprehensive two-dimensional chromatography, dual
ionization energies and high resolution mass spectrometry, Analyst, 142,
2395–2403, <a href="https://doi.org/10.1039/C7AN00625J" target="_blank">https://doi.org/10.1039/C7AN00625J</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib66"><label>66</label><mixed-citation>
Yee, L. D., Kautzman, K. E., Loza, C. L., Schilling, K. A., Coggon, M. M., Chhabra, P. S., Chan, M. N., Chan, A. W. H.,
Hersey, S. P., Crounse, J. D., Wennberg, P. O., Flagan, R. C., and Seinfeld, J. H.: Secondary organic aerosol formation
from biomass burning intermediates: phenol and methoxyphenols, Atmos. Chem. Phys., 13, 8019–8043, <a href="https://doi.org/10.5194/acp-13-8019-2013" target="_blank">https://doi.org/10.5194/acp-13-8019-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib67"><label>67</label><mixed-citation>
Yokelson, R. J., Griffith, D. W. T., and Ward, D. E.: Open-path Fourier
transform infrared studies of large-scale laboratory biomass fires, J.
Geophys. Res.-Atmos., 101, 21067–21080, 1996.
</mixed-citation></ref-html>
<ref-html id="bib1.bib68"><label>68</label><mixed-citation>
Yokelson, R. J., Crounse, J. D., DeCarlo, P. F., Karl, T., Urbanski, S., Atlas, E., Campos, T., Shinozuka, Y., Kapustin, V.,
Clarke, A. D., Weinheimer, A., Knapp, D. J., Montzka, D. D., Holloway, J., Weibring, P., Flocke, F., Zheng, W., Toohey, D.,
Wennberg, P. O., Wiedinmyer, C., Mauldin, L., Fried, A., Richter, D., Walega, J., Jimenez, J. L., Adachi, K., Buseck, P. R.,
Hall, S. R., and Shetter, R.: Emissions from biomass burning in the Yucatan, Atmos. Chem. Phys., 9, 5785–5812, <a href="https://doi.org/10.5194/acp-9-5785-2009" target="_blank">https://doi.org/10.5194/acp-9-5785-2009</a>, 2009.

</mixed-citation></ref-html>
<ref-html id="bib1.bib69"><label>69</label><mixed-citation>
Zhao, Y., Hennigan, C. J., May, A. A., Tkacik, D. S., de Gouw, J. A.,
Gilman, J. B., Kuster, W. C., Borbon, A., and Robinson, A. L.:
Intermediate-Volatility Organic Compounds: A Large Source of Secondary
Organic Aerosol, Environ. Sci. Technol., 48, 13743–13750, <a href="https://doi.org/10.1021/es5035188" target="_blank">https://doi.org/10.1021/es5035188</a>,
2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib70"><label>70</label><mixed-citation>
Zhao, Y., Nguyen, N. T., Presto, A. A., Hennigan, C. J., May, A. A., and
Robinson, A. L.: Intermediate Volatility Organic Compound Emissions from
On-Road Gasoline Vehicles and Small Off-Road Gasoline Engines, Environ. Sci.
Technol., 4554–4563, <a href="https://doi.org/10.1021/acs.est.5b06247" target="_blank">https://doi.org/10.1021/acs.est.5b06247</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib71"><label>71</label><mixed-citation>
Ziemann, P. J.: Effects of molecular structure on the chemistry of aerosol
formation from the OH-radical-initiated oxidation of alkanes and alkenes,
Int. Rev. Phys. Chem., 30, 161–195, 2011.
</mixed-citation></ref-html>--></article>
