<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" dtd-version="3.0">
  <front>
    <journal-meta>
<journal-id journal-id-type="publisher">ACP</journal-id>
<journal-title-group>
<journal-title>Atmospheric Chemistry and Physics</journal-title>
<abbrev-journal-title abbrev-type="publisher">ACP</abbrev-journal-title>
<abbrev-journal-title abbrev-type="nlm-ta">Atmos. Chem. Phys.</abbrev-journal-title>
</journal-title-group>
<issn pub-type="epub">1680-7324</issn>
<publisher><publisher-name>Copernicus Publications</publisher-name>
<publisher-loc>Göttingen, Germany</publisher-loc>
</publisher>
</journal-meta>

    <article-meta>
      <article-id pub-id-type="doi">10.5194/acp-17-10477-2017</article-id><title-group><article-title>An efficient approach for treating composition-dependent diffusion within organic particles</article-title>
      </title-group><?xmltex \runningtitle{An efficient approach for treating composition-dependent diffusion}?><?xmltex \runningauthor{S. O'Meara et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>O'Meara</surname><given-names>Simon</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-7197-0651</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2">
          <name><surname>Topping</surname><given-names>David O.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-8247-9649</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Zaveri</surname><given-names>Rahul A.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-9874-8807</ext-link></contrib>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>McFiggans</surname><given-names>Gordon</given-names></name>
          <email>g.mcfiggans@manchester.ac.uk</email>
        <ext-link>https://orcid.org/0000-0002-3423-7896</ext-link></contrib>
        <aff id="aff1"><label>1</label><institution>Centre for Atmospheric Science, School of Earth &amp; Environmental Sciences, University of Manchester, <?xmltex \hack{\newline}?>Manchester, M13 9PL, UK</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>National Centre for Atmospheric Science (NCAS), University of Manchester, Manchester, M13 9PL, UK</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>Atmospheric Sciences and Global Change Division, Pacific Northwest National Laboratory, Richland,<?xmltex \hack{\newline}?> Washington 99352, USA</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">Gordon McFiggans (g.mcfiggans@manchester.ac.uk)</corresp></author-notes><pub-date><day>7</day><month>September</month><year>2017</year></pub-date>
      
      <volume>17</volume>
      <issue>17</issue>
      <fpage>10477</fpage><lpage>10494</lpage>
      <history>
        <date date-type="received"><day>25</day><month>November</month><year>2016</year></date>
           <date date-type="rev-request"><day>12</day><month>January</month><year>2017</year></date>
           <date date-type="rev-recd"><day>7</day><month>July</month><year>2017</year></date>
           <date date-type="accepted"><day>18</day><month>July</month><year>2017</year></date>
      </history>
      <permissions>
<license license-type="open-access">
<license-p>This work is licensed under the Creative Commons Attribution 3.0 Unported License. To view a copy of this licence, visit <ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/licenses/by/3.0/">https://creativecommons.org/licenses/by/3.0/</ext-link></license-p>
</license>
</permissions><self-uri xlink:href="https://acp.copernicus.org/articles/.html">This article is available from https://acp.copernicus.org/articles/.html</self-uri>
<self-uri xlink:href="https://acp.copernicus.org/articles/.pdf">The full text article is available as a PDF file from https://acp.copernicus.org/articles/.pdf</self-uri>


      <abstract>
    <p>Mounting evidence demonstrates that under certain conditions the
rate of component partitioning between the gas and particle phase in
atmospheric organic aerosol is limited by particle-phase diffusion. To date,
however, particle-phase diffusion has not been incorporated into regional
atmospheric models. An analytical rather than numerical solution to diffusion
through organic particulate matter is desirable because of its comparatively
small computational expense in regional models. Current analytical models
assume diffusion to be independent of composition and therefore use a
constant diffusion coefficient. To realistically model diffusion, however, it
should be composition-dependent (e.g. due to the partitioning of components
that plasticise, vitrify or solidify). This study assesses the modelling
capability of an analytical solution to diffusion corrected to account for
composition dependence against a numerical solution. Results show reasonable
agreement when the gas-phase saturation ratio of a partitioning component is
constant and particle-phase diffusion limits partitioning rate (<inline-formula><mml:math id="M1" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 10 %
discrepancy in estimated radius change). However, when the saturation ratio
of the partitioning component varies, a generally applicable correction
cannot be found, indicating that existing methodologies are incapable of
deriving a general solution. Until such time as a general solution is found,
caution should be given to sensitivity studies that assume constant
diffusivity. The correction was implemented in the polydisperse, multi-process
Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) and is used
to illustrate how the evolution of number size distribution may be
accelerated by condensation of a plasticising component onto viscous organic
particles.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p>The accurate simulation of atmospheric aerosol transformation has been
identified as a key component of assessing aerosol impact on climate and
health <xref ref-type="bibr" rid="bib1.bibx9 bib1.bibx7 bib1.bibx3 bib1.bibx8" id="paren.1"/>. However,
comprehensive modelling of the physicochemical processes that determine
aerosol transformation across large spatial and temporal scales can be
challenging due to the limitations of computer power <xref ref-type="bibr" rid="bib1.bibx33" id="paren.2"/>.
While the majority of processes in large-scale models are solved by numerical
methods, analytical solutions offer less computational expense.
Particle-phase diffusion may be solved both analytically, under certain
assumptions, or numerically <xref ref-type="bibr" rid="bib1.bibx4" id="paren.3"/>.</p>
      <p>The advantage of an analytical solution over a numerical one is the decreased
computer expense <xref ref-type="bibr" rid="bib1.bibx22 bib1.bibx37 bib1.bibx21" id="paren.4"><named-content content-type="pre">e.g.</named-content></xref>. The
Euler forward-step method of <xref ref-type="bibr" rid="bib1.bibx37" id="text.5"/> was observed to have the
shortest computer time of three published numerical methods for diffusion
estimation <xref ref-type="bibr" rid="bib1.bibx15" id="paren.6"/>. When a constant particle-phase diffusivity was
assumed, this method had a computer time approximately a factor of 20 greater
than the analytical method presented in <xref ref-type="bibr" rid="bib1.bibx34" id="text.7"/> (with the
numerical method using the minimum spatial resolution (20 shells) required
for convergence of predicted equilibrium times and the maximum change in
component molecule number per time step recommended by <xref ref-type="bibr" rid="bib1.bibx37" id="text.8"/>,
while the analytical method used a conservative temporal resolution of
1 <inline-formula><mml:math id="M2" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10<inline-formula><mml:math id="M3" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> time steps). To rigorously investigate the role of
composition-dependent particle-phase diffusion in particulates containing
organic components, a multi-process, large-scale model is required. An
analytical solution to particle-phase diffusion would make this much more
practical than a numerical solution with respect to computer time.</p>
      <p>To date particle-phase diffusion has not been included in regional-scale
atmospheric models. Two outcomes of recent studies, however, indicate that
particle-phase diffusion may pose a limitation to mass transfer over the
timescales relevant to these models. The first is field and laboratory
observations that indicate organic particulates existing in a glassy phase
state <xref ref-type="bibr" rid="bib1.bibx36 bib1.bibx31 bib1.bibx29 bib1.bibx18" id="paren.9"/>. Second is the
contribution of very low volatility organic compounds <xref ref-type="bibr" rid="bib1.bibx6 bib1.bibx28" id="paren.10"/> to particulate matter, since volatility and diffusivity show
positive correlations <xref ref-type="bibr" rid="bib1.bibx12 bib1.bibx10" id="paren.11"/>.</p>
      <p>Whether particle-phase diffusion exerts a significant influence on the
transformation of organic particulate matter remains an unanswered question.
A major advance was the incorporation of an analytical solution to
composition-independent particle-phase diffusion into a growth equation for a
spherical particle by <xref ref-type="bibr" rid="bib1.bibx34" id="text.12"/>. In examples of constant
particle-phase diffusion coefficients, it was shown that, with sufficiently
low diffusivity, particle number size distributions could be greatly
perturbed, though there was also a dependency on reaction rate and
volatility. Using both analytical and numerical solutions to mass transfer
equations, <xref ref-type="bibr" rid="bib1.bibx14" id="text.13"/> also report particle-phase diffusion being
limiting under certain conditions, with a dependency on accommodation
coefficient, particle size and volatility.</p>
      <p>While the results of <xref ref-type="bibr" rid="bib1.bibx34" id="text.14"/> and <xref ref-type="bibr" rid="bib1.bibx14" id="text.15"/> are highly
beneficial, they have not accounted for the possibility of
composition-dependent diffusion <xref ref-type="bibr" rid="bib1.bibx30 bib1.bibx13 bib1.bibx17 bib1.bibx15" id="paren.16"/>. This is particularly relevant when considering the role of
water, which is important because of its comparatively high abundance and
high self-diffusion coefficient <xref ref-type="bibr" rid="bib1.bibx23 bib1.bibx15" id="paren.17"/>. The potential
for water exerting a plasticising effect on low-diffusivity organic particles
is particularly important because the constituent components are expected to
be highly oxidised <xref ref-type="bibr" rid="bib1.bibx6 bib1.bibx28" id="paren.18"/> and therefore polar and likely
water-soluble <xref ref-type="bibr" rid="bib1.bibx38 bib1.bibx27" id="paren.19"/>. While numerical solutions to
composition-dependent diffusion are available <xref ref-type="bibr" rid="bib1.bibx37 bib1.bibx21 bib1.bibx15" id="paren.20"/>, an analytical solution has not, to the authors'
knowledge, yet been published. Indeed, <xref ref-type="bibr" rid="bib1.bibx34" id="text.21"/> state that the
analytical solution requires incorporation of further complexity in the
particle phase: heterogeneously distributed reactant species, liquid–liquid
phase separation and heterogenous (with regard to position) diffusivity.</p>
      <p>How does radial heterogeneity of diffusivity arise? Atmospheric component
concentrations and their partitioning coefficients will vary substantially in
time and space <xref ref-type="bibr" rid="bib1.bibx5" id="paren.22"/>, leading to concentration gradients
through particles. With sufficient difference in the self-diffusivity of the
component to the diffusivity of the particle bulk initially (in the case of
condensation) or at equilibrium state (in the case of evaporation), and
sufficient abundance of the component in the vapour phase (condensation) or
particle phase (evaporation), diffusion is likely to occur at a rate
dependent on particle composition. An example would be a particle
predominately composed of secondary organic material with a low diffusivity
that was formed during a comparatively low-relative-humidity afternoon and
present in the boundary layer. Relative humidity increases as evening
progresses and air temperature decreases. The resulting condensation of water
onto the outside of the particle establishes a concentration gradient,
thereby inducing diffusion. The increased concentration of water will act to
increase diffusivity near the surface, while diffusivity in the particle
core remains low <xref ref-type="bibr" rid="bib1.bibx37 bib1.bibx13 bib1.bibx17 bib1.bibx15" id="paren.23"/>.</p>
      <p>The analytical solution is strictly valid under the following conditions:
constant concentration of the diffusing component at the particle surface,
constant particle size and constant diffusion coefficient (diffusivity). In
deriving a correction for varying diffusion coefficient, therefore,
corrections to variable surface concentration and particle size may be
implicit, depending on the scenario. Thus in the results below, the
derivation of a correction is first studied for the relatively simple case of
a constant surface mole fraction (determined through equilibration with a
constant gas-phase saturation ratio). Second, the case of variable surface
mole fraction (due to equilibration with a variable gas-phase saturation
ratio) is studied. In addition, the effects of composition-dependent
diffusion on number size distribution are demonstrated.</p>
</sec>
<sec id="Ch1.S2">
  <title>Method</title>
      <p>In the first part of the method the model setup will be described, including
all assumptions made. A simple two-component system was assumed, comprising
one semi-volatile (sv) and one non-volatile component (nv) that were
nonreactive. Both components were assigned a molecular weight of 100 g mol<inline-formula><mml:math id="M4" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>
and a density of 1 <inline-formula><mml:math id="M5" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10<inline-formula><mml:math id="M6" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">6</mml:mn></mml:msup></mml:math></inline-formula> g m<inline-formula><mml:math id="M7" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (in the discussion it is
shown that the model is sensitive to the ratio of the component molar volumes
rather than absolute values of molecular weight or density). Ideality was
assumed; therefore particle-phase volume was calculated by the addition of
the product of each component's number of moles and molar volume. The initial
particle-phase concentration was radially homogenous. For the purpose of
deriving a solution to particle-phase diffusion independent of gas-phase
diffusion the latter was assumed instantaneous. Therefore, in combination
with the assumption of ideality, changes to the particle-phase surface mole
fraction of the partitioning component imply equal changes to its gas-phase
saturation ratio.</p>
      <p>Fick's second law was solved by a numerical method; for a sphere, with
spherical coordinates and with the diffusion coefficient (<inline-formula><mml:math id="M8" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>) dependent on
composition, this is <xref ref-type="bibr" rid="bib1.bibx4" id="paren.24"/>
          <disp-formula id="Ch1.E1" content-type="numbered"><mml:math id="M9" display="block"><mml:mrow><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mo>∂</mml:mo><mml:msub><mml:mi>C</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:mi>r</mml:mi><mml:mo>,</mml:mo><mml:mi>t</mml:mi><mml:mo>)</mml:mo></mml:mrow><mml:mrow><mml:mo>∂</mml:mo><mml:mi>t</mml:mi></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:msup><mml:mi>r</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:mfrac></mml:mstyle><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mo>∂</mml:mo><mml:mrow><mml:mo>∂</mml:mo><mml:mi>r</mml:mi></mml:mrow></mml:mfrac></mml:mstyle><mml:mfenced close=")" open="("><mml:msup><mml:mi>r</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:msub><mml:mi>D</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:msub><mml:mi>C</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>)</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mo>∂</mml:mo><mml:msub><mml:mi>C</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:mi>r</mml:mi><mml:mo>,</mml:mo><mml:mi>t</mml:mi><mml:mo>)</mml:mo></mml:mrow><mml:mrow><mml:mo>∂</mml:mo><mml:mi>r</mml:mi></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced></mml:mrow></mml:math></disp-formula>
        for component <inline-formula><mml:math id="M10" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula>, where <inline-formula><mml:math id="M11" display="inline"><mml:mi>C</mml:mi></mml:math></inline-formula> is concentration, <inline-formula><mml:math id="M12" display="inline"><mml:mi>r</mml:mi></mml:math></inline-formula> is radius and <inline-formula><mml:math id="M13" display="inline"><mml:mi>t</mml:mi></mml:math></inline-formula>
represents time. In this study <inline-formula><mml:math id="M14" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> followed a logarithmic dependence on the
mole fraction of the semi-volatile component:
          <disp-formula id="Ch1.E2" content-type="numbered"><mml:math id="M15" display="block"><mml:mrow><mml:mi>D</mml:mi><mml:mo>(</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:msup><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:msup><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M16" display="inline"><mml:mrow><mml:msup><mml:mi>D</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> is the self-diffusion coefficient and <inline-formula><mml:math id="M17" display="inline"><mml:mi>x</mml:mi></mml:math></inline-formula> is mole fraction.
This equation fitted measurements reported in <xref ref-type="bibr" rid="bib1.bibx30" id="text.25"/> for ideal
mixtures. The model described below uses a stationary coordinate reference
frame, which for an ideal binary system requires that each component have the
same diffusivity, quantified by the diffusion coefficient. This is true
regardless of the component molecular size and is physically necessary to
attain volume continuity <xref ref-type="bibr" rid="bib1.bibx25 bib1.bibx11" id="paren.26"/>. The mathematical
proof for the necessity of symmetric diffusion coefficients in an ideal
binary system (e.g. comprising components 1 and 2) begins with
          <disp-formula id="Ch1.E3" content-type="numbered"><mml:math id="M18" display="block"><mml:mrow><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mo>-</mml:mo><mml:mi mathvariant="normal">∇</mml:mi><mml:msub><mml:mi>C</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow><mml:mrow><mml:mi mathvariant="normal">∇</mml:mi><mml:msub><mml:mi>C</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>V</mml:mi><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi>V</mml:mi><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M19" display="inline"><mml:mrow><mml:msub><mml:mi>V</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is the molar volume and <inline-formula><mml:math id="M20" display="inline"><mml:mrow><mml:mi mathvariant="normal">∇</mml:mi><mml:mi>C</mml:mi></mml:mrow></mml:math></inline-formula> is the concentration gradient
at the boundary where flux is being considered. Next, Fick's first law (which
is equivalent to Fick's second law when flux is at steady state) can be
expressed in terms of volumetric flux (m<inline-formula><mml:math id="M21" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M22" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>):
          <disp-formula id="Ch1.E4" content-type="numbered"><mml:math id="M23" display="block"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:msub><mml:mi>D</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mi mathvariant="normal">∇</mml:mi><mml:msub><mml:mi>C</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:msub><mml:mi>V</mml:mi><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi></mml:mrow></mml:msub><mml:mi>A</mml:mi><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M24" display="inline"><mml:mi>A</mml:mi></mml:math></inline-formula> is the area diffusion occurs over. The magnitude of volumetric flux
has to be equivalent for both components in order to attain volume
continuity. For a particle of finite volume this means mass continuity is
also satisfied. With this stipulation and Eq. (<xref ref-type="disp-formula" rid="Ch1.E3"/>), it can be
seen that symmetric diffusion coefficients are physically necessary.</p>
      <p>Equation (<xref ref-type="disp-formula" rid="Ch1.E1"/>) can be solved by several numerical methods
<xref ref-type="bibr" rid="bib1.bibx37 bib1.bibx21" id="paren.27"><named-content content-type="pre">e.g.</named-content></xref>, but here we use the
initial-boundary-problem approach (Fi-PaD) as presented in
<xref ref-type="bibr" rid="bib1.bibx15" id="text.28"/>. This model operates by splitting the particle into
concentric shells, each assumed to be homogeneously mixed. The shell
representation allows the radial profile of concentration (<inline-formula><mml:math id="M25" display="inline"><mml:mi>C</mml:mi></mml:math></inline-formula>) and therefore
diffusion coefficient (<inline-formula><mml:math id="M26" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>) to be realised. Increased steepness of the <inline-formula><mml:math id="M27" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>
gradient requires increased spatial resolution for accurate diffusion
estimation. The volume of shells is revalued after every time step. Greater
model temporal resolution is required with increased rates of volume change
to account for the effect of particle size on diffusion rate. Therefore, as
described in <xref ref-type="bibr" rid="bib1.bibx15" id="text.29"/>, a maximum radius change of 0.1 % was allowed
over a single time step, and the interval was iteratively shortened until
this condition was met.</p>
      <p>The analytical solution to diffusion is presented and described in
<xref ref-type="bibr" rid="bib1.bibx34" id="text.30"/>. For a non-reactive component with instantaneous
gas-particle surface equilibration it is
          <disp-formula id="Ch1.E5" content-type="numbered"><mml:math id="M28" display="block"><mml:mrow><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mi>d</mml:mi><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:mi>d</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>=</mml:mo><mml:mn mathvariant="normal">4</mml:mn><mml:mi mathvariant="italic">π</mml:mi><mml:msubsup><mml:mi>R</mml:mi><mml:mrow><mml:mi>p</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:msub><mml:mi>N</mml:mi><mml:mi>m</mml:mi></mml:msub><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:mi>p</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub><mml:mo>(</mml:mo><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>g</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub><mml:mo>)</mml:mo><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M29" display="inline"><mml:mrow><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:mi>p</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is the overall mass transfer coefficient,
          <disp-formula id="Ch1.E6" content-type="numbered"><mml:math id="M30" display="block"><mml:mrow><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:mi>p</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mi mathvariant="normal">p</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:mn mathvariant="normal">5</mml:mn><mml:msub><mml:mi>D</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mfenced open="(" close=")"><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mrow><mml:mi>g</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi></mml:mrow><mml:mo>*</mml:mo></mml:msubsup></mml:mrow><mml:mrow><mml:msub><mml:mo>∑</mml:mo><mml:mi>j</mml:mi></mml:msub><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>j</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        and <inline-formula><mml:math id="M31" display="inline"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is the saturation ratio:
          <disp-formula id="Ch1.E7" content-type="numbered"><mml:math id="M32" display="block"><mml:mrow><mml:msub><mml:mi>S</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mrow><mml:mi>g</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi></mml:mrow><mml:mo>*</mml:mo></mml:msubsup></mml:mrow><mml:mrow><mml:msub><mml:mo>∑</mml:mo><mml:mi>j</mml:mi></mml:msub><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>j</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M33" display="inline"><mml:msub><mml:mi/><mml:mi>a</mml:mi></mml:msub></mml:math></inline-formula> represents the bulk of the particle phase, <inline-formula><mml:math id="M34" display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">g</mml:mi></mml:msub></mml:math></inline-formula> represents the
gas phase, <inline-formula><mml:math id="M35" display="inline"><mml:mi>j</mml:mi></mml:math></inline-formula> is the index for all components, <inline-formula><mml:math id="M36" display="inline"><mml:mi>m</mml:mi></mml:math></inline-formula> is the index for
size bin, <inline-formula><mml:math id="M37" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is particle radius, <inline-formula><mml:math id="M38" display="inline"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mi>g</mml:mi><mml:mo>*</mml:mo></mml:msubsup></mml:mrow></mml:math></inline-formula> is the effective saturation
vapour concentration (mol m<inline-formula><mml:math id="M39" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air)), <inline-formula><mml:math id="M40" display="inline"><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover></mml:math></inline-formula> is the
concentration in the bulk part of a phase (mol m<inline-formula><mml:math id="M41" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air)) and
<inline-formula><mml:math id="M42" display="inline"><mml:mi>N</mml:mi></mml:math></inline-formula> is the particle number concentration (m<inline-formula><mml:math id="M43" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air)). In order to
compare results from Eqs. (<xref ref-type="disp-formula" rid="Ch1.E1"/>) and (<xref ref-type="disp-formula" rid="Ch1.E5"/>),
concentrations from the latter must be divided by the volume concentration of
particles (m<inline-formula><mml:math id="M44" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> (particle) m<inline-formula><mml:math id="M45" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air)). Following this division,
it can be seen that diffusion has an inverse square dependence on particle
radius in both solutions.</p>
      <p>The analytical solution treats the particle as a single body; i.e. it cannot
resolve radial heterogeneity of concentration and therefore diffusion
coefficient (the <inline-formula><mml:math id="M46" display="inline"><mml:mrow><mml:mi>D</mml:mi><mml:mo>-</mml:mo><mml:mi>r</mml:mi></mml:mrow></mml:math></inline-formula> profile). In order for the diffusion coefficient in
the analytical method to respond to composition variation therefore, <inline-formula><mml:math id="M47" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> was
determined using Eq. <xref ref-type="disp-formula" rid="Ch1.E2"/>, which in turn used the bulk particle
semi-volatile mole fraction (<inline-formula><mml:math id="M48" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>). Because <inline-formula><mml:math id="M49" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> and the
correction factor (derivation described below) varied with composition, the
analytical solution was sensitive to temporal resolution. Analytical
estimates were compared for a given scenario when the time steps of the
Fi-PaD simulation were used and when a temporal resolution twice as fine was
used. Results were identical; therefore the Fi-PaD resolution was considered
sufficient for reliable analytical results.</p>
      <p>Particles were assumed to initially have a radially homogenous concentration
profile. Diffusion was then initiated by a change to the semi-volatile mole
fraction at the particle surface (<inline-formula><mml:math id="M50" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) to attain the
equilibrium mole fraction <inline-formula><mml:math id="M51" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. The radial heterogeneity of <inline-formula><mml:math id="M52" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> (in
Fi-PaD) was therefore established through the setting of <inline-formula><mml:math id="M53" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M54" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and through the radial concentration gradient of the
semi-volatile component resulting from diffusion. Since diffusion approaches
equilibrium asymptotically, it is necessary to define an effective
equilibrium point prior to complete equilibrium. We chose the
<inline-formula><mml:math id="M55" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding state, which is when the absolute difference in component
concentration at the surface and the bulk average (everything below the
surface) decreases by a factor of <inline-formula><mml:math id="M56" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula> from its initial value.</p>
      <p>Fi-PaD estimates of the time required to reach the <inline-formula><mml:math id="M57" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding state
(the <inline-formula><mml:math id="M58" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time (<inline-formula><mml:math id="M59" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>)) converged as its spatial resolution
increased <xref ref-type="bibr" rid="bib1.bibx15" id="paren.31"/>. The spatial resolution required to attain a
satisfactory degree of convergence increased with the gradient of the <inline-formula><mml:math id="M60" display="inline"><mml:mrow><mml:mi>D</mml:mi><mml:mo>-</mml:mo><mml:mi>r</mml:mi></mml:mrow></mml:math></inline-formula>
profile, which in turn was proportional to <inline-formula><mml:math id="M61" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M62" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>. The maximum acceptable change for
<inline-formula><mml:math id="M63" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time following the addition of a further shell was set at
0.1 %. Based on this condition, Fig. <xref ref-type="fig" rid="Ch1.F1"/> shows the shell
resolution used for combinations of <inline-formula><mml:math id="M64" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and log<inline-formula><mml:math id="M65" display="inline"><mml:mrow><mml:msub><mml:mi/><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>. The majority of scenarios used a conservative
shell resolution, and only where <inline-formula><mml:math id="M66" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M67" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> are both at a maximum for a given resolution
was the convergence criteria neared.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1"><caption><p>The shell resolution (given in the legend) distribution with <inline-formula><mml:math id="M68" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M69" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>
used, for <bold>(a)</bold> positive (<inline-formula><mml:math id="M70" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve) <inline-formula><mml:math id="M71" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<bold>(b)</bold> negative (<inline-formula><mml:math id="M72" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve) <inline-formula><mml:math id="M73" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p></caption>
        <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f01.pdf"/>

      </fig>

      <p>As mentioned in the Introduction, the correction of the analytical solution
was for variation of not only the diffusion coefficient but also particle
size and surface concentration of the diffusing component. Consequently,
corrections were derived and assessed for three scenarios of increasing
complexity and generality. In the list of these scenarios below, the
assumptions of ideality and instantaneous gas-phase diffusion mean that the
condition of the surface mole fraction of the semi-volatile component also
represents that of its gas-phase saturation ratio:
<list list-type="custom"><list-item><label>i.</label><p>constant <inline-formula><mml:math id="M74" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, with initial/equilibrium <inline-formula><mml:math id="M75" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>
for positive (<inline-formula><mml:math id="M76" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve, i.e. condensing case) <inline-formula><mml:math id="M77" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and negative
(<inline-formula><mml:math id="M78" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve, i.e. evaporating case) <inline-formula><mml:math id="M79" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>;</p></list-item><list-item><label>ii.</label><p>constant <inline-formula><mml:math id="M80" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, with initial/equilibrium <inline-formula><mml:math id="M81" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>≠</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>
for <inline-formula><mml:math id="M82" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M83" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M84" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M85" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>;</p></list-item><list-item><label>iii.</label><p>variable <inline-formula><mml:math id="M86" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p></list-item></list></p>
      <p>For all scenarios the shell resolution distributions in
Fig. <xref ref-type="fig" rid="Ch1.F1"/> were used to estimate the appropriate Fi-PaD
spatial resolutions. To derive correction equations, <inline-formula><mml:math id="M87" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub><mml:mo>-</mml:mo><mml:mi>t</mml:mi></mml:mrow></mml:math></inline-formula> profiles
estimated by the analytical solution were fit to those of Fi-PaD. A
least-squares fitting procedure was attempted and found to be under
constrained; thus fitting was done by eye, and the quality of fit was objectively assessed
through residuals, as described below. <inline-formula><mml:math id="M88" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M89" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> values across the
ranges shown in Fig. <xref ref-type="fig" rid="Ch1.F1"/> were used, and the specific
combinations shown in Fig. <xref ref-type="fig" rid="Ch1.F1"/> were used for the simplest
derivation scenario (i) above. The analytical solution was found to have
greater disagreement with the numerical solution for the condensation case
than the evaporation case. Consequently fits were found for more combinations
of <inline-formula><mml:math id="M90" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M91" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> for the condensation case, as
shown in Fig. <xref ref-type="fig" rid="Ch1.F1"/>. An interpolation method was developed to
estimate parameters for the correction equation between the values of <inline-formula><mml:math id="M92" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M93" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>
used for the equation derivation.</p>
      <p>Finally, the following were incorporated into the Model for Simulating
Aerosol Interactions and Chemistry (MOSAIC) <xref ref-type="bibr" rid="bib1.bibx34" id="paren.32"/>:
Eq. (<xref ref-type="disp-formula" rid="Ch1.E2"/>), the correction equations and the interpolation method
(Eqs. <xref ref-type="disp-formula" rid="Ch1.E5"/>–<xref ref-type="disp-formula" rid="Ch1.E7"/> were already implemented).
The temporal evolution of number size distributions was found for the case of
condensation of a plasticiser and compared against an assumption of constant
diffusivity. For elucidation of the effect on number size distribution of
composition-dependent diffusion only the processes of gas–particle
partitioning and particle-phase diffusion were modelled in MOSAIC.</p>
</sec>
<sec id="Ch1.S3">
  <title>Results</title>
      <p>To begin, uncorrected analytical and Fi-PaD estimates of <inline-formula><mml:math id="M94" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding times
were compared when <inline-formula><mml:math id="M95" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> was dependent on composition (Eq. <xref ref-type="disp-formula" rid="Ch1.E2"/>).
Estimates were made for the <inline-formula><mml:math id="M96" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M97" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> combinations in
Fig. <xref ref-type="fig" rid="Ch1.F1"/>, and the discrepancy is shown in
Fig. <xref ref-type="fig" rid="Ch1.F2"/>. For the case of <inline-formula><mml:math id="M98" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M99" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>
(condensation) (Fig. <xref ref-type="fig" rid="Ch1.F2"/>a), the analytical solution tends to
underestimate diffusion rate, a result of being unable to resolve the
plasticising effect of the semi-volatile component as it diffuses inward.
Consequently, the discrepancy increases with increasing values of <inline-formula><mml:math id="M100" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M101" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula>, which
together determine the plasticising effect. For <inline-formula><mml:math id="M102" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M103" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (evaporation) (Fig. <xref ref-type="fig" rid="Ch1.F2"/>b), this trend is
reversed for comparatively high values of <inline-formula><mml:math id="M104" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M105" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> because the analytical solution
is unable to resolve the solidifying effect of the non-volatile component as
the semi-volatile component diffuses outward. The solidifying effect
decreases with decreasing <inline-formula><mml:math id="M106" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M107" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula>, whereas the inaccuracy
introduced to the analytical by changing particle size is unaffected by
<inline-formula><mml:math id="M108" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula> but increases with <inline-formula><mml:math id="M109" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula>. The competing effects of these sources of inaccuracy
produce the irregular contour layout at higher values of
<inline-formula><mml:math id="M110" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>|</mml:mo></mml:mrow></mml:math></inline-formula>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2"><caption><p>Ratio of Fi-PaD and analytical (<inline-formula><mml:math id="M111" display="inline"><mml:mrow><mml:mi>a</mml:mi><mml:mi>n</mml:mi><mml:mi>a</mml:mi><mml:mi>l</mml:mi><mml:mi>y</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:math></inline-formula>) estimated <inline-formula><mml:math id="M112" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding
times (<inline-formula><mml:math id="M113" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) for <bold>(a)</bold> <inline-formula><mml:math id="M114" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M115" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<bold>(b)</bold> <inline-formula><mml:math id="M116" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M117" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p></caption>
        <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f02.pdf"/>

      </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p>Examples of the correction factor for <inline-formula><mml:math id="M118" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> in the analytical solution
(<inline-formula><mml:math id="M119" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) required to give agreement with radius estimates in Fi-PaD as a
function of proximity to equilibrium. <bold>(a)</bold> and <bold>(b)</bold> are for
<inline-formula><mml:math id="M120" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M121" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M122" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M123" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>,
respectively. The model scenario is described in the legend, which applies to
both plots. Fits are plotted using Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>).</p></caption>
        <?xmltex \igopts{width=312.980315pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f03.pdf"/>

      </fig>

      <p>Generally the analytical solution is much more accurate for <inline-formula><mml:math id="M124" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M125" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, reaching a maximum absolute disagreement around 0.6 orders
of magnitude compared to 7.0 for <inline-formula><mml:math id="M126" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M127" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. This is
attributed to the different characteristics of diffusion between the <inline-formula><mml:math id="M128" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve
and <inline-formula><mml:math id="M129" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M130" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> cases. In the former, diffusion in Fi-PaD
is limited by <inline-formula><mml:math id="M131" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> near the particle surface, with a surface shell acting like
a “crust”. During early stages, the plasticising effect of the
semi-volatile component on this crust leads to comparatively rapid
diffusion out of the particle, but the strength of this effect decreases with
concentration of the semi-volatile component, so that the majority of the
<inline-formula><mml:math id="M132" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time is characterised by a gradual, relatively slow diffusion
outward (see Appendix for an example of the diffusion coefficient variation
with radius for the evaporating case). The inability of the analytical
solution to resolve the limiting diffusion near the surface leads to a
greater rate of initial diffusion; however the consequent decrease in
semi-volatile component concentration results in a <inline-formula><mml:math id="M133" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> value that replicates
the slow diffusion phase of Fi-PaD. In contrast, for <inline-formula><mml:math id="M134" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M135" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, diffusion is limited at the diffusion “front”, which is
the shell boundary between shells with the greatest radial gradient of
concentration. Modelling movement of the front requires knowledge of the
concentration gradient there; however the only information available to the
analytical approach is the particle bulk concentration, leading to the large
discrepancies seen.</p>
      <p>To bring the analytical and numerical solutions into agreement, a correction
factor is proposed for the analytical solution. This will act on the
diffusion coefficient to correct the diffusion rate (and is therefore denoted
by <inline-formula><mml:math id="M136" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>). Eq. (<xref ref-type="disp-formula" rid="Ch1.E6"/>) is thus modified to
          <disp-formula id="Ch1.E8" content-type="numbered"><mml:math id="M137" display="block"><mml:mrow><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:msub><mml:mi>K</mml:mi><mml:mrow><mml:mi>p</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mi mathvariant="normal">p</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:mn mathvariant="normal">5</mml:mn><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub><mml:msub><mml:mi>D</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mfenced close=")" open="("><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msubsup><mml:mi>C</mml:mi><mml:mrow><mml:mi>g</mml:mi><mml:mo>,</mml:mo><mml:mi>i</mml:mi></mml:mrow><mml:mo>*</mml:mo></mml:msubsup></mml:mrow><mml:mrow><mml:msub><mml:mo>∑</mml:mo><mml:mi>j</mml:mi></mml:msub><mml:msub><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>j</mml:mi><mml:mo>,</mml:mo><mml:mi>m</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mo>.</mml:mo></mml:mrow></mml:math></disp-formula></p>
      <p>To derive a function for <inline-formula><mml:math id="M138" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, first the simplest scenario of a single and
instantaneous change in <inline-formula><mml:math id="M139" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> with the initial and final
<inline-formula><mml:math id="M140" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula> for <inline-formula><mml:math id="M141" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M142" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M143" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M144" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, respectively, is investigated. The correction factor for <inline-formula><mml:math id="M145" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> required to
bring analytical <inline-formula><mml:math id="M146" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> estimates into agreement with those of Fi-PaD was
found at each time step used by the latter model. The correction factor was
then plotted against proximity to equilibrium; here we use the absolute
difference between surface and bulk average <inline-formula><mml:math id="M147" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. This process was
done for the model inputs shown in Fig. <xref ref-type="fig" rid="Ch1.F1"/> to determine
whether a general equation form could be found that described the
relationship between the <inline-formula><mml:math id="M148" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> correction factor (<inline-formula><mml:math id="M149" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) and proximity to
equilibrium. Examples are shown in Fig. <xref ref-type="fig" rid="Ch1.F3"/>. The
resulting general equation for both <inline-formula><mml:math id="M150" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve and <inline-formula><mml:math id="M151" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M152" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>
is found to be
          <disp-formula id="Ch1.E9" content-type="numbered"><mml:math id="M153" display="block"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:msup><mml:mi>e</mml:mi><mml:mrow><mml:mo>(</mml:mo><mml:mo>(</mml:mo><mml:mo>|</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>s</mml:mi><mml:mi>v</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:msup><mml:mo>)</mml:mo><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:msup><mml:mo>-</mml:mo><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M154" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is a parameter value, dependent on <inline-formula><mml:math id="M155" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M156" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>. Where the self-diffusion
coefficients of components are the same in Fig. <xref ref-type="fig" rid="Ch1.F3"/>, the
correction is required only for the changing particle size. Oscillations in
<inline-formula><mml:math id="M157" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> occur for the case of <inline-formula><mml:math id="M158" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.88</mml:mn></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M159" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula>. This is
attributed to the competing effects of changing particle size, which for a
shrinking particle acts to overestimate diffusion rate, and of a
composition-dependent <inline-formula><mml:math id="M160" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>, which for a solidifying particle acts to
underestimate diffusion time. As diffusion proceeds, slight variations in the
relative strengths of these effects cause <inline-formula><mml:math id="M161" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> to oscillate.
Nevertheless, an overall trend is discernible and can be described by
Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4" specific-use="star"><caption><p>Examples of <inline-formula><mml:math id="M162" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error (Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>) of the analytical model
with corrected <inline-formula><mml:math id="M163" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> when diffusion is composition-dependent
(Eq. <xref ref-type="disp-formula" rid="Ch1.E2"/>), plotted against time normalised by the <inline-formula><mml:math id="M164" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding
time. <bold>(a)</bold> and <bold>(b)</bold> are for <inline-formula><mml:math id="M165" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M166" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>
and <inline-formula><mml:math id="M167" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M168" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, respectively, and scenarios are given in
the legend.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f04.pdf"/>

      </fig>

      <p>Parameter values for Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>) were found through fitting by
eye analytical <inline-formula><mml:math id="M169" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mi mathvariant="normal">p</mml:mi><mml:mo>-</mml:mo><mml:mi>t</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> profiles with those of Fi-PaD for the model inputs
shown in Fig. <xref ref-type="fig" rid="Ch1.F1"/> (values are provided in the Appendix). To
objectively test the goodness of fit, the following equation was used:
          <disp-formula id="Ch1.E10" content-type="numbered"><mml:math id="M170" display="block"><mml:mrow><mml:mi mathvariant="italic">%</mml:mi><mml:mi mathvariant="normal">error</mml:mi><mml:mo>=</mml:mo><mml:mfenced close=")" open="("><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mtext>p, Fi-PaD</mml:mtext><mml:mo>,</mml:mo><mml:mi>t</mml:mi></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>R</mml:mi><mml:mtext>p,
analyt,</mml:mtext></mml:msub><mml:mi>t</mml:mi></mml:mrow><mml:mrow><mml:mo>|</mml:mo><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mtext>p, Fi-PaD</mml:mtext><mml:mo>,</mml:mo><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mtext>p, Fi-PaD</mml:mtext><mml:mo>,</mml:mo><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:msub><mml:mo>|</mml:mo></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mn mathvariant="normal">100</mml:mn><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where analyt represents the corrected analytical model. Therefore, <inline-formula><mml:math id="M171" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error
is the fraction of the total change in <inline-formula><mml:math id="M172" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> comprised by the disagreement
in model estimates of <inline-formula><mml:math id="M173" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> at <inline-formula><mml:math id="M174" display="inline"><mml:mi>t</mml:mi></mml:math></inline-formula>.</p>
      <p>For each marked <inline-formula><mml:math id="M175" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> value in Fig. <xref ref-type="fig" rid="Ch1.F1"/>,
the marked <inline-formula><mml:math id="M176" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> scenario
with greatest <inline-formula><mml:math id="M177" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error was identified. Of these scenarios, the four with
greatest <inline-formula><mml:math id="M178" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error are shown in Fig. <xref ref-type="fig" rid="Ch1.F4"/> to demonstrate
the cases of worst agreement. Figure <xref ref-type="fig" rid="Ch1.F4"/> shows that the
disagreement between analytical and Fi-PaD model estimates rarely exceeds
<inline-formula><mml:math id="M179" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>6 %, even for cases representing the extremes of model disagreement.
Corrected analytical and numerical solution results were also compared beyond
the <inline-formula><mml:math id="M180" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-fold time, until the difference in concentration between surface and
bulk had diminished to a factor of <inline-formula><mml:math id="M181" display="inline"><mml:mrow><mml:mn mathvariant="normal">16</mml:mn><mml:mi>e</mml:mi></mml:mrow></mml:math></inline-formula>. The agreement shown in
Fig. <xref ref-type="fig" rid="Ch1.F4"/> was maintained to this further equilibration
point.</p>
      <p>In order to have general applicability, such good agreement must be
reproducible for intermediate values of <inline-formula><mml:math id="M182" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M183" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>, i.e. when parameter
values are interpolated between the points of Fig. <xref ref-type="fig" rid="Ch1.F1"/>.
Parameter relationships with <inline-formula><mml:math id="M184" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M185" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> varied substantially, requiring
separate interpolation methods for each parameter. The general method was to
first interpolate with respect to <inline-formula><mml:math id="M186" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, followed by
<inline-formula><mml:math id="M187" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>. For most accurate results the
interpolation equation was found to be dependent on the independent variables
as described in the Appendix (Tables <xref ref-type="table" rid="App1.Ch1.T3"/> and
<xref ref-type="table" rid="App1.Ch1.T4"/>). The interpolation was tested at <inline-formula><mml:math id="M188" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M189" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>
comparatively far from those with known parameter values and spread across
the variable space. Results are shown in
Fig. <xref ref-type="fig" rid="Ch1.F5"/>, again using the <inline-formula><mml:math id="M190" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error metric
presented in Eq. (<xref ref-type="disp-formula" rid="Ch1.E10"/>). They show that the low error produced for
known parameter values is maintained when the interpolation method is
applied.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5" specific-use="star"><caption><p>Examples of <inline-formula><mml:math id="M191" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error (Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>) of the analytical model
with corrected <inline-formula><mml:math id="M192" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> and composition-dependent on diffusion
(Eq. <xref ref-type="disp-formula" rid="Ch1.E2"/>), plotted against time normalised by the <inline-formula><mml:math id="M193" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding
time. Parameter values for Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>) were found through the
interpolation method presented in the Appendix (Tables <xref ref-type="table" rid="App1.Ch1.T3"/>
and <xref ref-type="table" rid="App1.Ch1.T4"/>). <bold>(a)</bold> and <bold>(b)</bold> are for <inline-formula><mml:math id="M194" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve
<inline-formula><mml:math id="M195" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M196" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M197" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, respectively,
and model setups are given in the legend.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f05.pdf"/>

      </fig>

      <p>Next, the case of a single and instantaneous change to <inline-formula><mml:math id="M198" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> with
the initial and final <inline-formula><mml:math id="M199" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>≠</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula> for <inline-formula><mml:math id="M200" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M201" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M202" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M203" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, respectively, is studied. For the <inline-formula><mml:math id="M204" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve
<inline-formula><mml:math id="M205" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> case, the correction method described above was
found to be transferable to any starting <inline-formula><mml:math id="M206" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> through
transformation of the <inline-formula><mml:math id="M207" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> dependence on <inline-formula><mml:math id="M208" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. An effective
self-diffusion coefficient of nv (<inline-formula><mml:math id="M209" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">nv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>) is set as the <inline-formula><mml:math id="M210" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> at the
starting <inline-formula><mml:math id="M211" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (Eq. <xref ref-type="disp-formula" rid="Ch1.E2"/>), and the starting
<inline-formula><mml:math id="M212" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> for the analytical is set to 0. <inline-formula><mml:math id="M213" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> is
constant, but the equilibrium <inline-formula><mml:math id="M214" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (<inline-formula><mml:math id="M215" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) is
changed to an effective value such that <inline-formula><mml:math id="M216" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> at equilibrium gives the same
change in <inline-formula><mml:math id="M217" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> from the starting <inline-formula><mml:math id="M218" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> as in the original
scenario. Consistent with Eq. (<xref ref-type="disp-formula" rid="Ch1.E2"/>) this effective
<inline-formula><mml:math id="M219" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is given by
          <disp-formula id="Ch1.E11" content-type="numbered"><mml:math id="M220" display="block"><mml:mrow><?xmltex \hack{\hbox\bgroup\fontsize{8.5}{8.5}\selectfont$\displaystyle}?><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:mo>(</mml:mo><mml:msub><mml:mi>log⁡</mml:mi><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">nv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:msub><mml:mo>(</mml:mo><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:msup><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:msup><mml:mo>)</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>)</mml:mo></mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:msub><mml:mi>log⁡</mml:mi><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">nv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>)</mml:mo></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo><?xmltex \hack{$\egroup}?></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M221" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M222" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> are the original values. An
example transformation to this effective model setup is shown in
Fig. <xref ref-type="fig" rid="Ch1.F6"/>. It can be seen that, compared to the original
setup, <inline-formula><mml:math id="M223" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is increased. Although the transformed <inline-formula><mml:math id="M224" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>
gradient with <inline-formula><mml:math id="M225" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is shallower than the original, this is
offset in terms of diffusion rate by the increased radial gradient in sv
concentration.</p>
      <p>A similar method can be applied to the evaporation scenario when the final
<inline-formula><mml:math id="M226" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>≠</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>. <inline-formula><mml:math id="M227" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">nv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> is set equal to that at the
final <inline-formula><mml:math id="M228" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and the final <inline-formula><mml:math id="M229" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is set to 0. Whereas
for the <inline-formula><mml:math id="M230" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M231" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> case we found
<inline-formula><mml:math id="M232" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, now an effective start <inline-formula><mml:math id="M233" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>
(<inline-formula><mml:math id="M234" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) is required. The equation for this is the same as
Eq. (<xref ref-type="disp-formula" rid="Ch1.E11"/>) but with <inline-formula><mml:math id="M235" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> replaced by
<inline-formula><mml:math id="M236" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">0</mml:mn><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eff</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and with <inline-formula><mml:math id="M237" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> replaced by
<inline-formula><mml:math id="M238" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. With regard to the transformed <inline-formula><mml:math id="M239" display="inline"><mml:mrow><mml:mi>D</mml:mi><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> profile
(e.g. Fig. <xref ref-type="fig" rid="Ch1.F6"/>), for a given pair of original start and
finish <inline-formula><mml:math id="M240" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and a given pair of original self-diffusion
coefficients, the transformation is the same for <inline-formula><mml:math id="M241" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve and <inline-formula><mml:math id="M242" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M243" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><caption><p>Example of the transformation of the <inline-formula><mml:math id="M244" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> dependence on
<inline-formula><mml:math id="M245" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> when the starting <inline-formula><mml:math id="M246" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (for condensation) or
final <inline-formula><mml:math id="M247" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (for evaporation) <inline-formula><mml:math id="M248" display="inline"><mml:mrow><mml:mo>≠</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>. In this example the
original starting <inline-formula><mml:math id="M249" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was 0.2 and the equilibrium
<inline-formula><mml:math id="M250" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was 0.6, while the original <inline-formula><mml:math id="M251" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> was <inline-formula><mml:math id="M252" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">14</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M253" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M254" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and <inline-formula><mml:math id="M255" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> was
1 <inline-formula><mml:math id="M256" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10<inline-formula><mml:math id="M257" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M258" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M259" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, as shown by the orange crosses. The
effective starting and equilibrium <inline-formula><mml:math id="M260" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and effective
<inline-formula><mml:math id="M261" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> found by the transformation described in the main text are
shown with blue crosses.</p></caption>
        <?xmltex \igopts{width=170.716535pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f06.pdf"/>

      </fig>

      <p>To exemplify the deviation in analytical (with correction) estimates of
diffusion rate from those of Fi-PaD when this transformation is applied, the
cases of <inline-formula><mml:math id="M262" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.2</mml:mn></mml:mrow></mml:math></inline-formula> and 0.5, and a comparatively large
<inline-formula><mml:math id="M263" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> of <inline-formula><mml:math id="M264" display="inline"><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula> were used.
Estimates were compared using Eq. (<xref ref-type="disp-formula" rid="Ch1.E10"/>). Results for <inline-formula><mml:math id="M265" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve and
<inline-formula><mml:math id="M266" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M267" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> are given in
Fig. <xref ref-type="fig" rid="Ch1.F7"/> and demonstrate that the deviations are
comparable to those when the transformation is not required
(Fig. <xref ref-type="fig" rid="Ch1.F4"/>).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7"><caption><p>Agreement between corrected analytical and Fi-PaD estimates, using
the metric given in Eq. (<xref ref-type="disp-formula" rid="Ch1.E10"/>), for <bold>(a)</bold> <inline-formula><mml:math id="M268" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M269" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <bold>(b)</bold> <inline-formula><mml:math id="M270" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M271" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, as shown in
the legend. The start and finish <inline-formula><mml:math id="M272" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>≠</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula> for <bold>(a)</bold> and <bold>(b)</bold>, respectively; therefore the transformation to an
effective model setup (as described in the main text) was required. For both
<bold>(a)</bold> and
<bold>(b)</bold> <inline-formula><mml:math id="M273" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula>.</p></caption>
        <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f07.pdf"/>

      </fig>

      <p>Before moving onto a correction for the case of variable <inline-formula><mml:math id="M274" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>,
the correction for constant <inline-formula><mml:math id="M275" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was implemented in MOSAIC to
investigate the effect of composition-dependent diffusion on number size
distribution. The same initial number size distribution as presented in
<xref ref-type="bibr" rid="bib1.bibx34" id="text.33"/> (their Fig. 11) was used. Reactions, coagulation,
nucleation, emission and deposition were all turned off to gain the clearest
demonstration of the diffusion effect. To maintain <inline-formula><mml:math id="M276" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, the
gas-phase concentration of the semi-volatile component was held constant and
low particle-phase self-diffusion coefficients were used to ensure that
partitioning was not limited by diffusion in the vapour phase. The model was
run in Langrangian mode to prevent numerical error due to rebinning and
resultant loss of information about the initial particle size.</p>
      <p>To test the effect on the timescale of number size distribution change during
condensation of a plasticising semi-volatile component, <inline-formula><mml:math id="M277" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was set to <inline-formula><mml:math id="M278" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>0.88, from an initial particle-phase mole
fraction of 0. The number size distribution following diffusion was found for
<inline-formula><mml:math id="M279" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> values of 0, <inline-formula><mml:math id="M280" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2 and
<inline-formula><mml:math id="M281" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4, with <inline-formula><mml:math id="M282" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> held constant at
1.0 <inline-formula><mml:math id="M283" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10<inline-formula><mml:math id="M284" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">26</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M285" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M286" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. Simulations were run until
diffusion was underway in large particles. The distributions after <inline-formula><mml:math id="M287" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">100</mml:mn></mml:mrow></mml:math></inline-formula>
and at the end of the run time (1.2 <inline-formula><mml:math id="M288" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10<inline-formula><mml:math id="M289" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">8</mml:mn></mml:msup></mml:math></inline-formula> s) for the
<inline-formula><mml:math id="M290" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> case are shown in
Fig. <xref ref-type="fig" rid="Ch1.F8"/>a and b, respectively, along with the initial
distribution.</p>
      <p>As expected, Fig. <xref ref-type="fig" rid="Ch1.F8"/> shows that the condensing component
can significantly increase the rate of diffusion and therefore the rate at
which the number size distribution evolves. The development of the number
size distribution shows no dependence on
<inline-formula><mml:math id="M291" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> since any change in
the plasticising strength of the condensate effects the same factor change in
diffusion rate for all particle sizes. For each self-diffusion coefficient
ratio there is preferential growth of smaller particles first due to the
square dependence of diffusion rate on particle radius, leading to a
narrowing of the distribution. This is followed by a widening as smaller
particles equilibrate and larger particles grow (consistent with
<xref ref-type="bibr" rid="bib1.bibx34" id="altparen.34"/>).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F8" specific-use="star"><caption><p>Number size distributions for
<inline-formula><mml:math id="M292" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> = 0, <inline-formula><mml:math id="M293" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2 and <inline-formula><mml:math id="M294" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4,
represented by <inline-formula><mml:math id="M295" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M296" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M297" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>, respectively (<inline-formula><mml:math id="M298" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> constant at <inline-formula><mml:math id="M299" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">26</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M300" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M301" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>). <inline-formula><mml:math id="M302" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>e</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is <inline-formula><mml:math id="M303" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.2</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">8</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> s.
<bold>(a)</bold> is the distribution at <inline-formula><mml:math id="M304" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:math></inline-formula> of <inline-formula><mml:math id="M305" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>e</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, and
<bold>(b)</bold> is that at <inline-formula><mml:math id="M306" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>e</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. <inline-formula><mml:math id="M307" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was increased
instantaneously from 0.00 to 0.88 and then held constant.</p></caption>
        <?xmltex \igopts{width=312.980315pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f08.pdf"/>

      </fig>

      <p><?xmltex \hack{\newpage}?>It is possible to set a constant diffusion coefficient in the analytical
solution without correction that attains the same <inline-formula><mml:math id="M308" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time as when
the analytical solution with correction is used with a variable diffusion
coefficient. For the case of <inline-formula><mml:math id="M309" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">26</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M310" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">22</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M311" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M312" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and <inline-formula><mml:math id="M313" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.88</mml:mn></mml:mrow></mml:math></inline-formula>, the required constant diffusion coefficient was found
to be <inline-formula><mml:math id="M314" display="inline"><mml:mrow><mml:msub><mml:mi>D</mml:mi><mml:mi mathvariant="normal">con</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">4.4</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">23</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M315" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M316" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. The <inline-formula><mml:math id="M317" display="inline"><mml:mi mathvariant="italic">%</mml:mi></mml:math></inline-formula> error
(Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>) when the constant <inline-formula><mml:math id="M318" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> treatment and the corrected
analytical solution are used is shown in Fig. <xref ref-type="fig" rid="Ch1.F9"/>a. This
figure shows that, although the constant <inline-formula><mml:math id="M319" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> simulation does give the same
<inline-formula><mml:math id="M320" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-fold time (agreement in radius estimate at <inline-formula><mml:math id="M321" display="inline"><mml:mrow><mml:mi>t</mml:mi><mml:mo>/</mml:mo><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:math></inline-formula>), diffusion
estimates about this point are different between the treatments of diffusion
coefficient. In the constant case, slower diffusion relative to the numerical
solution and corrected analytical solution is initially estimated, followed
by quicker diffusion after <inline-formula><mml:math id="M322" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-fold time.</p>
      <p>To test the effect of using a constant <inline-formula><mml:math id="M323" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> on a polydisperse population, this
treatment is used to estimate number size distributions from MOSAIC and
compared to estimates using the variable <inline-formula><mml:math id="M324" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> treatment. Using the same model
setup as for Fig. <xref ref-type="fig" rid="Ch1.F8"/>, the comparison is shown in
Fig. <xref ref-type="fig" rid="Ch1.F9"/>b–d . Results are shown for three times since run
start as described in the figure. As expected from
Fig. <xref ref-type="fig" rid="Ch1.F9"/>a, if one focuses on the smaller particle sizes
it can be seen that growth is initially quickest in the variable-<inline-formula><mml:math id="M325" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> case
(Fig. <xref ref-type="fig" rid="Ch1.F9"/>b) but that growth in the constant-<inline-formula><mml:math id="M326" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> case
catches up with and exceeds that for variable <inline-formula><mml:math id="M327" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>, leading to increased narrowing of
the distribution (Fig. <xref ref-type="fig" rid="Ch1.F9"/>d). Note that, while this
demonstration focuses on the smallest sizes, the same effect is true for all
sizes. These discrepancies demonstrate the requirement for a correction to
the analytical solution that is dependent on the proximity to equilibrium
rather than a correction based on a constant <inline-formula><mml:math id="M328" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F9" specific-use="star"><caption><p>In <bold>(a)</bold>, the discrepancy (found using Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>)
in estimated radius with model run time normalised to the <inline-formula><mml:math id="M329" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time
(<inline-formula><mml:math id="M330" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) when <inline-formula><mml:math id="M331" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is increased instantaneously from 0.00 to 0.88
for two diffusion coefficient treatments: (i) corrected analytical solution
with <inline-formula><mml:math id="M332" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">26</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M333" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">22</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M334" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M335" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (<inline-formula><mml:math id="M336" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mrow><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>) and (ii) using the
analytical without correction when <inline-formula><mml:math id="M337" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> is constant at <inline-formula><mml:math id="M338" display="inline"><mml:mrow><mml:mn mathvariant="normal">4.4</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">23</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M339" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M340" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (<inline-formula><mml:math id="M341" display="inline"><mml:mrow><mml:msub><mml:mi>D</mml:mi><mml:mi mathvariant="normal">con</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>). In later plots are the number
size distributions for the same diffusion coefficient treatments, with red
representing the former treatment (variable <inline-formula><mml:math id="M342" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>) and blue the latter one
(constant <inline-formula><mml:math id="M343" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula>)). In <bold>(b)</bold> <inline-formula><mml:math id="M344" display="inline"><mml:mrow><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">2.4</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> s, in <bold>(c)</bold> <inline-formula><mml:math id="M345" display="inline"><mml:mrow><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">4.8</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">4</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> s and in <bold>(d)</bold> <inline-formula><mml:math id="M346" display="inline"><mml:mrow><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.2</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">5</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> s since
simulation start.</p></caption>
        <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f09.pdf"/>

      </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F10" specific-use="star"><caption><p>Plots demonstrating the limitation of the correction to cases of
varying <inline-formula><mml:math id="M347" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. In <bold>(a)</bold> are the two temporal profiles of
<inline-formula><mml:math id="M348" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> used to test accuracy, while <bold>(b)</bold> and
<bold>(c)</bold> show Fi-PaD and analytical (analyt) estimates of radius (the
latter corrected using Eqs. <xref ref-type="disp-formula" rid="Ch1.E12"/> and <xref ref-type="disp-formula" rid="Ch1.E13"/>) for
<inline-formula><mml:math id="M349" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> temporal profiles <inline-formula><mml:math id="M350" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M351" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>,
respectively. <inline-formula><mml:math id="M352" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">14</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>, and <inline-formula><mml:math id="M353" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M354" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M355" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. In the lower row of plots are the range in
rates of surface mole fraction change of a semi-volatile component assuming
instantaneous equilibration with the gas phase due to three processes:
<bold>(d)</bold> gas-phase chemical reaction with OH, with <inline-formula><mml:math id="M356" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>  and <inline-formula><mml:math id="M357" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">8</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M358" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> molecule<inline-formula><mml:math id="M359" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M360" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx35" id="paren.35"/>;
<bold>(e)</bold> dry deposition to land surface, with <inline-formula><mml:math id="M361" display="inline"><mml:mrow><mml:msub><mml:mi>v</mml:mi><mml:mrow><mml:mi mathvariant="normal">d</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M362" display="inline"><mml:mrow><mml:msub><mml:mi>v</mml:mi><mml:mrow><mml:mi mathvariant="normal">d</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m s<inline-formula><mml:math id="M363" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx19" id="paren.36"/>; and <bold>(f)</bold> condensation onto
particles, with <inline-formula><mml:math id="M364" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mrow><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>  and <inline-formula><mml:math id="M365" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mrow><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.0</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> s<inline-formula><mml:math id="M366" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx20 bib1.bibx32" id="paren.37"/>.</p></caption>
        <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f10.pdf"/>

      </fig>

      <p>For the analytical solution to be generally applicable, a correction when
<inline-formula><mml:math id="M367" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> varies prior to particle-phase equilibration is required.
If the rate of <inline-formula><mml:math id="M368" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> change is very low compared to
particle-phase diffusion (particle-phase equilibration reached with
negligible change of <inline-formula><mml:math id="M369" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) or very high compared to
particle-phase diffusion (no diffusion in the particle phase before the
surface concentration reaches a constant value), no correction is needed. In
between, however, a further correction dependent on the rate of
<inline-formula><mml:math id="M370" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> change is required. Changes to <inline-formula><mml:math id="M371" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> may result
from changes to the saturation ratio of the semi-volatile component. This may
occur through a variety of ways but in general is due to the sum of emission
and production being different to that of deposition and destruction.
Processes controlling gas-phase component concentrations occur at rates
varying by several orders of magnitude (e.g. reaction rate with OH radicals;
<xref ref-type="bibr" rid="bib1.bibx35" id="altparen.38"/>). The rate of particle-phase diffusion may also vary by
orders of magnitude, as it is dependent on the concentration and diffusivity
of the diffusant as well as the diffusivity of the initial particle and the
particle size <xref ref-type="bibr" rid="bib1.bibx15" id="paren.39"/>.</p>
      <p>Results shown to this point have been for a constant <inline-formula><mml:math id="M372" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>
(implying instantaneous particle surface–gas equilibration and a constant
gas-phase saturation ratio). Application of the correction presented above
(Eq. <xref ref-type="disp-formula" rid="Ch1.E9"/>) to the variable case is not straightforward as it is
based on the difference between initial and equilibrium mole fractions, and
the particle is assumed to initially have a radially homogenous concentration
profile. In the following passage is a description of a method to overcome
this constraint for a given time profile of <inline-formula><mml:math id="M373" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>. This serves as
a basis to explain the limits of this method to general application.</p>
      <p><inline-formula><mml:math id="M374" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was decreased from 0.88 to 0.00 with a sinusoidal profile,
as shown in Fig. <xref ref-type="fig" rid="Ch1.F10"/>a (curve prof<inline-formula><mml:math id="M375" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:math></inline-formula>). The initial
particle radius was <inline-formula><mml:math id="M376" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m, <inline-formula><mml:math id="M377" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">14</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M378" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">10</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> m<inline-formula><mml:math id="M379" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M380" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. The
resulting <inline-formula><mml:math id="M381" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mrow><mml:mi mathvariant="normal">p</mml:mi><mml:mo>-</mml:mo><mml:mi>t</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> profile using Fi-PaD is shown in
Fig. <xref ref-type="fig" rid="Ch1.F10"/>b. A new correction equation was required that could
accommodate a variable surface mole fraction and give agreement with Fi-PaD
estimates. Through fitting by eye, this was found to be
          <disp-formula id="Ch1.E12" content-type="numbered"><mml:math id="M382" display="block"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:msup><mml:mi>e</mml:mi><mml:mrow><mml:mo>(</mml:mo><mml:mo>(</mml:mo><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">4</mml:mn></mml:msub><mml:msup><mml:mo>)</mml:mo><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:msup><mml:mo>)</mml:mo><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:msup><mml:mo>-</mml:mo><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>
        where
          <disp-formula id="Ch1.E13" content-type="numbered"><mml:math id="M383" display="block"><mml:mrow><?xmltex \hack{\hbox\bgroup\fontsize{9.0}{9.0}\selectfont$\displaystyle}?><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">4</mml:mn></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi>a</mml:mi><mml:mo>,</mml:mo><mml:mi>s</mml:mi><mml:mi>v</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mi>sin⁡</mml:mi><mml:mo>(</mml:mo><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">rat</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>t</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">rat</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:msub><mml:mo>)</mml:mo><mml:mo>/</mml:mo><mml:mn mathvariant="normal">1.3</mml:mn><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2.4</mml:mn><mml:mo>)</mml:mo><mml:mo>/</mml:mo><mml:mn mathvariant="normal">4.6</mml:mn><mml:mo>+</mml:mo><mml:mn mathvariant="normal">1.1</mml:mn><mml:mo>)</mml:mo></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo><?xmltex \hack{$\egroup}?></mml:mrow></mml:math></disp-formula>
        where <inline-formula><mml:math id="M384" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">rat</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is the ratio of <inline-formula><mml:math id="M385" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> in the particle bulk
to that at the surface. The ratios at the start of the time step being solved
for (<inline-formula><mml:math id="M386" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) and at the start of the previous time step (<inline-formula><mml:math id="M387" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>) are used.
<inline-formula><mml:math id="M388" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math id="M389" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M390" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> are the same as used for the original equation
(Eq. <xref ref-type="disp-formula" rid="Ch1.E9"/>), and <inline-formula><mml:math id="M391" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> was set equal to the
particle bulk <inline-formula><mml:math id="M392" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>.</p>
      <p>This correction gives excellent agreement with the Fi-PaD estimate
(Fig. <xref ref-type="fig" rid="Ch1.F10"/>b). However, when used for a slightly different
temporal profile of <inline-formula><mml:math id="M393" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (curve prof<inline-formula><mml:math id="M394" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:math></inline-formula> in
Fig. <xref ref-type="fig" rid="Ch1.F10"/>a), poorer agreement is attained. This indicates
that the correction described in
Eqs. (<xref ref-type="disp-formula" rid="Ch1.E12"/>)–(<xref ref-type="disp-formula" rid="Ch1.E13"/>) is over-fitted. This is
unsurprising as it is dependent on the rate of change of the surface mole
fraction of the semi-volatile component (through <inline-formula><mml:math id="M395" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">rat</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:mi>t</mml:mi><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">rat</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>t</mml:mi><mml:mrow><mml:mi>n</mml:mi><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>). Consequently, we suggest that a generally
applicable correction is only possible with an a priori estimate of the rate
of change of the ratio of bulk to surface mole fraction. However, the bulk
mole fraction is the value being estimated, making a solution intractable
using this methodology.</p>
      <p>Also shown in Fig. <xref ref-type="fig" rid="Ch1.F10"/> is the expected range in rate of
change of particle surface mole fraction of a semi-volatile component assumed
to be in equilibrium with the gas phase due to three processes: chemical
reaction, dry deposition and condensation onto particles. The rates of change
cover several orders of magnitude depending on the rate constants (given in
the caption). When comparing these rates to the <inline-formula><mml:math id="M396" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding times for
particle-phase diffusion given in <xref ref-type="bibr" rid="bib1.bibx15" id="text.40"/>, it is clear that under certain
scenarios the surface mole fraction change rate is similar to the particle-phase
diffusion rate. In this instance, the corrections presented above break down.
In contrast, when the particle-phase diffusion rate is much slower than the
change in surface mole fraction of the semi-volatile component, a constant surface mole
fraction may be assumed and the correction applied with the high accuracy
presented above. This scenario is more likely to arise for particles with low
diffusivity and therefore of interest to particle-phase diffusion studies.</p>
</sec>
<sec id="Ch1.S4">
  <title>Discussion</title>
      <p>As mentioned in the introduction, for a simple case of diffusion independent
of composition, the computer time for the numerical solution is approximately
20 times as long as for the analytical solution. However, this factor difference is
expected to rise by 2–3 orders of magnitude for very steep gradients of
diffusion coefficient with radius <xref ref-type="bibr" rid="bib1.bibx15" id="paren.41"/>. Therefore,
implementation of composition-dependent diffusion into a polydisperse,
multi-process aerosol model like MOSAIC through an analytical solution is
highly preferable to a numerical one. Here, equilibration between the gas
and particle phase was assumed instantaneous, so that the surface mole
fraction of the partitioning component was equal to its gas-phase saturation
ratio.</p>
      <p>For the limiting case of constant surface mole fraction of a semi-volatile
component, here a correction to the analytical solution for when diffusivity
is composition-dependent has been derived and validated against estimates
from the numerical solution. The correction was required to account not only
for variable diffusivity but also for varying particle size as the semi-volatile
component partitions between phases, since the uncorrected analytical
solution assumes constant particle size. A method to interpolate correction
parameters between values of <inline-formula><mml:math id="M397" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> (change to surface mole
fraction that initiates diffusion) and
<inline-formula><mml:math id="M398" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> (ratio of component self-diffusion
coefficients) was also derived and validated. A similar derivation was
attempted for the case of variable surface mole fraction; however this was
found to be of narrow applicability. This issue, along with the limitations
of the correction for constant <inline-formula><mml:math id="M399" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, is discussed below.</p>
      <p>In favour of the correction is its independence of particle size. In both
solutions (numerical and analytical), diffusion rates have a square
dependence on particle size; therefore the ratios of estimated diffusion rate
are constant across sizes (all else being equal), as is the correction.
Similarly, the correction is independent of absolute values of
<inline-formula><mml:math id="M400" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M401" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and only dependent on the ratio of
component self-diffusion coefficients:
<inline-formula><mml:math id="M402" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>.</p>
      <p>Although the correction is applicable across particle sizes and values of
<inline-formula><mml:math id="M403" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M404" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>, it is specific to the ratio of component molar
volumes used here, which is 1 : 1. The change in particle size due to
partitioning depends on the molar volumes of components. The response of
diffusion rate to a change in molar volume is different between the models
and is non-linear in each. For quantifying model sensitivity to molar volume,
a further complication is the variation of diffusivity with both molar mass
and density <xref ref-type="bibr" rid="bib1.bibx10" id="paren.42"/>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F11" specific-use="star"><caption><p>Plot <bold>(a)</bold> shows the logarithmic dependency of diffusion
coefficient on mole fraction on which the presented correction is derived and
the sigmoidal dependencies for which it was tested. In <bold>(b)</bold> and
<bold>(c)</bold> are the analytical model errors (Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>) when the
sigmoidal dependencies given in <bold>(a)</bold> were used. <bold>(b)</bold> <inline-formula><mml:math id="M405" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve
<inline-formula><mml:math id="M406" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <bold>(c)</bold> <inline-formula><mml:math id="M407" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M408" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, and
for both plots <inline-formula><mml:math id="M409" display="inline"><mml:mrow><mml:mo>|</mml:mo><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>|</mml:mo><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.88</mml:mn></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math id="M410" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula>.</p></caption>
        <?xmltex \igopts{width=312.980315pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f11.pdf"/>

      </fig>

      <p>To gain an indication of the model disagreement arising from changing molar
volume when the corrected analytical model is used, expected ranges of molar
mass (<inline-formula><mml:math id="M411" display="inline"><mml:mi>M</mml:mi></mml:math></inline-formula>) and density (<inline-formula><mml:math id="M412" display="inline"><mml:mi mathvariant="italic">ρ</mml:mi></mml:math></inline-formula>) for atmospheric organic components were
found. <xref ref-type="bibr" rid="bib1.bibx1" id="text.43"/> show that <inline-formula><mml:math id="M413" display="inline"><mml:mi>M</mml:mi></mml:math></inline-formula> is likely to be in the range <inline-formula><mml:math id="M414" display="inline"><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> to <inline-formula><mml:math id="M415" display="inline"><mml:mrow><mml:mn mathvariant="normal">3</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> g mol<inline-formula><mml:math id="M416" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, and <xref ref-type="bibr" rid="bib1.bibx26" id="text.44"/>
demonstrate that <inline-formula><mml:math id="M417" display="inline"><mml:mi mathvariant="italic">ρ</mml:mi></mml:math></inline-formula> is likely to be between <inline-formula><mml:math id="M418" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.2</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">6</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M419" display="inline"><mml:mrow><mml:mn mathvariant="normal">1.6</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">6</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> g m<inline-formula><mml:math id="M420" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. The maximum expected molar volume for the
semi-volatile component was therefore given by using <inline-formula><mml:math id="M421" display="inline"><mml:mrow><mml:mi>M</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">3</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> gmol<inline-formula><mml:math id="M422" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and <inline-formula><mml:math id="M423" display="inline"><mml:mrow><mml:mi mathvariant="italic">ρ</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1.2</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn mathvariant="normal">10</mml:mn><mml:mn mathvariant="normal">6</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> g m<inline-formula><mml:math id="M424" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. A relatively
large effect from the changed molar volume was gained through using <inline-formula><mml:math id="M425" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.88</mml:mn></mml:mrow></mml:math></inline-formula>. Furthermore, the proportion of the correction
attributed to particle size change rather than <inline-formula><mml:math id="M426" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> composition dependence is
greatest for <inline-formula><mml:math id="M427" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:math></inline-formula>;
therefore this was used to maximise the effect of varying molar volume on
model agreement. For the <inline-formula><mml:math id="M428" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve and <inline-formula><mml:math id="M429" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M430" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> cases, the
maximum observed % error (Eq. <xref ref-type="disp-formula" rid="Ch1.E10"/>) was <inline-formula><mml:math id="M431" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>58.0 and 29.0 %,
respectively.</p>
      <p>The presented parameter values are therefore unable to reliably estimate
diffusion when the molar volume ratio of components does not equal 1 : 1 (a
value we chose arbitrarily). Parameter values account for changes to the
diffusivity and diffusing distance due to partitioning of a semi-volatile
component. The diffusing distance is dependent on component molar volume
ratios; therefore when these are varied, new parameters are required. For such
systems, however, the presented parameterisation for the correction is valid.
With different parameter values the parameterisation would be applicable to,
for example, the case of diffusion in a mixture of water and organic
material.</p>
      <p>A further limitation of the presented correction is its specificity to the
<inline-formula><mml:math id="M432" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> dependence on composition. Here we have assumed a logarithmic dependence
on <inline-formula><mml:math id="M433" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>; however, measurements have reported sigmoidal and
irregular dependencies resulting from changes to phase state and/or
non-ideality <xref ref-type="bibr" rid="bib1.bibx30 bib1.bibx13 bib1.bibx17" id="paren.45"><named-content content-type="pre">e.g.</named-content></xref>. An
indication of model disagreement generated by varying the <inline-formula><mml:math id="M434" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula> dependence was
found by calculating the % error for several dependencies; all were based
on a sigmoidal function, but the steepness at the “cliff edge” was
varied, as shown in Fig. <xref ref-type="fig" rid="Ch1.F11"/>a. Also shown here is the
logarithmic dependence used to find the presented correction. A
<inline-formula><mml:math id="M435" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math id="M436" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub><mml:mo>=</mml:mo><mml:mo>±</mml:mo><mml:mn mathvariant="normal">0.88</mml:mn></mml:mrow></mml:math></inline-formula> were used because these provide the most stringent
test of estimation capability. The dependencies were used in both the Fi-PaD
and analytical model, with the latter using the correction method for the
logarithmic dependence. The resulting discrepancies in estimated particle
radius are shown in Figs. <xref ref-type="fig" rid="Ch1.F11"/>b and c.</p>
      <p>Figure <xref ref-type="fig" rid="Ch1.F11"/>b shows that for <inline-formula><mml:math id="M437" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M438" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> the analytical method increasingly overestimates initial
diffusion with increasing sigmoidal function steepness, indicating the
correction is too great when the difference in surface and bulk
<inline-formula><mml:math id="M439" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is high. The reason is that, with the dependencies used,
increased steepness causes increased resistance to inward semi-volatile
diffusion at low <inline-formula><mml:math id="M440" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. As the difference in surface and bulk
<inline-formula><mml:math id="M441" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> decreases in the analytical method, so does the correction factor
(Fig. <xref ref-type="fig" rid="Ch1.F3"/>a), allowing Fi-PaD estimates to approach those
of the analytical method (the upward part of curves). For the least steep sigmoidal
dependence (sig1) this effect continues, and Fi-PaD diffusion actually
overtakes the analytical method. For the intermediate sigmoidal profile (sig2) this
effect occurs until the analytical system reaches a semi-volatile mole
fraction where the profile curves sharply upward. Now the effect of
increasing diffusion coefficient in the analytical method surpasses the effect of a
relatively small correction factor that had allowed Fi-PaD diffusion
estimates to accelerate relative to the analytical method, causing a relative
acceleration of diffusion in the analytical method. The result is the downward curve
for the intermediate profile towards equilibrium time. The same process would
arise for the steepest sigmoidal profile shown here (sig3) if sufficient
diffusion occurred to allow the system to enter the mole fraction region
where the diffusion coefficient curves upward.</p>
      <p>Results for <inline-formula><mml:math id="M442" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M443" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> are shown in
Fig. <xref ref-type="fig" rid="Ch1.F11"/>c, which shows that the analytical solution
initially underestimates diffusion. This is attributed to the increasing
plasticising effect of the semi-volatile on the surface crust of the particle
with increasing steepness of the sigmoidal cliff edge. Once
<inline-formula><mml:math id="M444" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">sv</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> has decreased, however, the analytical solution shows a tendency to
overestimate diffusion. The plasticising effect can quickly decrease
(Fig. <xref ref-type="fig" rid="Ch1.F11"/>a), and the surface crust imposes a greater
impediment to diffusion. The correction factor (which acts to decelerate
diffusion (Fig. <xref ref-type="fig" rid="Ch1.F3"/>b)) found from the logarithmic
dependence is insufficient to replicate this for the steepest dependency.</p>
      <p>As Fig. <xref ref-type="fig" rid="Ch1.F11"/> shows, the presented correction is limited in
its generality with regards to diffusion coefficient dependence on
composition. Along with the effect of component molar volume ratios on
diffusion, however, this could be overcome through refitting of parameter
values. In contrast, results indicate that improving the accuracy of the
correction for the case of changing particle surface mole fraction is not
attainable, since this requires a priori knowledge of the particle-phase
diffusion rate (the value being estimated). Nevertheless, for studies into
particle-phase diffusion limitation on particle transformation, it is
possible that the surface mole fraction will vary quickly compared to
particle-phase diffusion, allowing the assumption of a constant surface mole
fraction and therefore accurate application of the correction presented here.</p>
      <p>Without a general analytical solution (e.g. allowing for varying surface mole
fraction), thorough evaluation of particle-phase diffusion influence on
particulate transformation remains limited. The correction for constant
surface mole fraction of the semi-volatile component, however, offers
improved computer efficiency (compared to numerical methods) of evaluating
particle-phase diffusion effects, such as in <xref ref-type="bibr" rid="bib1.bibx2" id="text.46"/> and
<xref ref-type="bibr" rid="bib1.bibx14" id="text.47"/>. It may also be of use for the inference of diffusivity from
laboratory studies if the rates of semi-volatile gas-phase saturation ratio
change and gas-phase diffusion are much greater than the particle-phase
diffusion rate <xref ref-type="bibr" rid="bib1.bibx37 bib1.bibx13 bib1.bibx24" id="paren.48"/>. In modelling
studies where composition-dependent diffusion occurs and gas-phase saturation
ratios of partitioning components vary over similar timescales to
particle-phase diffusion, we recommend the numerical solutions mentioned
above in preference to the assumption of constant diffusivity.</p>
</sec>
<sec id="Ch1.S5" sec-type="conclusions">
  <title>Conclusions</title>
      <p>For accurate simulation of the transformation of particulates containing
organic components, the analytical solution to diffusion must account for
composition-dependent diffusion rate. To do this, a correction to the
analytical solution was investigated based on estimates from the numerical
solution of the partial differential equation for diffusion. A correction was
derived for the limiting case of a constant surface mole fraction of the
diffusing component (equal to a constant gas-phase saturation ratio when
assuming equilibration between the gas and particle phase). The corrected
analytical solution shows good agreement with the numerical one, rarely
exceeding 8 % deviation in estimated particle radius change.</p>
      <p>The verified correction is currently limited to conditions of similar molar
volume between the partitioning component and the particle average, and of a
logarithmic dependence of diffusion coefficient on partitioning component
mole fraction. These limitations may be overcome through refitting of
parameters. However, a correction for the more general case of variable
surface mole fraction of the diffusing component (e.g. due to varying
gas-phase saturation ratio) was found to depend on the rate of change of the
ratio of bulk to surface mole fraction. A correction based on the analytical
approach presented here is therefore not viable because it requires a priori
knowledge of the value to be estimated: the particle bulk mole fraction. A
different approach to modifying the analytical solution to diffusion is thus
required to make it generally applicable.</p>
      <p>To determine whether an expression for particle-phase diffusion is required
in a regional model, an evaluation of the sensitivity of organic particle
properties to diffusion is desirable. This study builds on previous
investigations toward allowing such a sensitivity analysis and enables it
for the limiting case of particles with sufficiently low diffusivity that
changes to the particle surface mole fraction of the partitioning component
occur much more quickly than particle-phase diffusion. Work remains, however,
to create a generally applicable, realistic and efficient diffusion model for
particulates containing organic components. Until this is achieved, studies
of aerosol kinetic regimes conducted under limiting scenarios, such as
diffusion independent of composition, should be interpreted cautiously
because of their limited applicability to the real atmosphere. In particular,
the comparatively high abundance and high self-diffusion coefficient of water
mean that its role in plasticising or vitrifying particles through
condensation or evaporation, respectively, must be accounted for when
assessing the effect of particle-phase diffusion on partitioning.</p>
</sec>

      
      </body>
    <back><notes notes-type="dataavailability">

      <p>The code for the analytical solution and for the numerical
solution to particle-phase diffusion along with the data output from MOSAIC
that is relevant to this study are available at
<uri>https://github.com/simonom/Dcorr</uri> (<xref ref-type="bibr" rid="bib1.bibx16" id="altparen.49"/>).</p>
  </notes><?xmltex \hack{\clearpage}?><app-group>

<app id="App1.Ch1.S1">
  <title/><?xmltex \hack{\appendixtables}?><?xmltex \floatpos{h}?><table-wrap id="App1.Ch1.T1"><caption><p>Equation (<xref ref-type="disp-formula" rid="Ch1.E9"/>) parameter values found for <inline-formula><mml:math id="M445" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve
<inline-formula><mml:math id="M446" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="8">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:colspec colnum="8" colname="col8" align="right"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M447" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">0</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M448" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M449" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M450" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>6</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M451" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>8</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M452" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>10</oasis:entry>  
         <oasis:entry colname="col8"><inline-formula><mml:math id="M453" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>12</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M454" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col8" align="center"><inline-formula><mml:math id="M455" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.05</oasis:entry>  
         <oasis:entry colname="col2">1.50</oasis:entry>  
         <oasis:entry colname="col3">1.55</oasis:entry>  
         <oasis:entry colname="col4">1.60</oasis:entry>  
         <oasis:entry colname="col5">1.65</oasis:entry>  
         <oasis:entry colname="col6">1.70</oasis:entry>  
         <oasis:entry colname="col7">1.75</oasis:entry>  
         <oasis:entry colname="col8">1.80</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.20</oasis:entry>  
         <oasis:entry colname="col2">1.75</oasis:entry>  
         <oasis:entry colname="col3">1.80</oasis:entry>  
         <oasis:entry colname="col4">1.85</oasis:entry>  
         <oasis:entry colname="col5">1.90</oasis:entry>  
         <oasis:entry colname="col6">1.95</oasis:entry>  
         <oasis:entry colname="col7">2.00</oasis:entry>  
         <oasis:entry colname="col8">2.05</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.35</oasis:entry>  
         <oasis:entry colname="col2">2.00</oasis:entry>  
         <oasis:entry colname="col3">2.00</oasis:entry>  
         <oasis:entry colname="col4">2.00</oasis:entry>  
         <oasis:entry colname="col5">2.00</oasis:entry>  
         <oasis:entry colname="col6">1.90</oasis:entry>  
         <oasis:entry colname="col7">1.80</oasis:entry>  
         <oasis:entry colname="col8">1.67</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.65</oasis:entry>  
         <oasis:entry colname="col2">2.00</oasis:entry>  
         <oasis:entry colname="col3">2.00</oasis:entry>  
         <oasis:entry colname="col4">1.70</oasis:entry>  
         <oasis:entry colname="col5">1.50</oasis:entry>  
         <oasis:entry colname="col6">1.40</oasis:entry>  
         <oasis:entry colname="col7">1.30</oasis:entry>  
         <oasis:entry colname="col8">1.25</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.80</oasis:entry>  
         <oasis:entry colname="col2">2.00</oasis:entry>  
         <oasis:entry colname="col3">1.70</oasis:entry>  
         <oasis:entry colname="col4">1.30</oasis:entry>  
         <oasis:entry colname="col5">1.23</oasis:entry>  
         <oasis:entry colname="col6">1.19</oasis:entry>  
         <oasis:entry colname="col7">1.14</oasis:entry>  
         <oasis:entry colname="col8">1.13</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1">0.88</oasis:entry>  
         <oasis:entry colname="col2">2.60</oasis:entry>  
         <oasis:entry colname="col3">1.35</oasis:entry>  
         <oasis:entry colname="col4">1.22</oasis:entry>  
         <oasis:entry colname="col5">1.10</oasis:entry>  
         <oasis:entry colname="col6">1.08</oasis:entry>  
         <oasis:entry colname="col7">1.07</oasis:entry>  
         <oasis:entry colname="col8">1.13</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry namest="col2" nameend="col8" align="center"><inline-formula><mml:math id="M456" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.05</oasis:entry>  
         <oasis:entry colname="col2">150.00</oasis:entry>  
         <oasis:entry colname="col3">185.00</oasis:entry>  
         <oasis:entry colname="col4">228.00</oasis:entry>  
         <oasis:entry colname="col5">285.00</oasis:entry>  
         <oasis:entry colname="col6">352.00</oasis:entry>  
         <oasis:entry colname="col7">450.00</oasis:entry>  
         <oasis:entry colname="col8">580.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.20</oasis:entry>  
         <oasis:entry colname="col2">30.00</oasis:entry>  
         <oasis:entry colname="col3">40.00</oasis:entry>  
         <oasis:entry colname="col4">57.00</oasis:entry>  
         <oasis:entry colname="col5">77.00</oasis:entry>  
         <oasis:entry colname="col6">105.00</oasis:entry>  
         <oasis:entry colname="col7">135.00</oasis:entry>  
         <oasis:entry colname="col8">180.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.35</oasis:entry>  
         <oasis:entry colname="col2">15.00</oasis:entry>  
         <oasis:entry colname="col3">24.00</oasis:entry>  
         <oasis:entry colname="col4">36.00</oasis:entry>  
         <oasis:entry colname="col5">51.00</oasis:entry>  
         <oasis:entry colname="col6">56.00</oasis:entry>  
         <oasis:entry colname="col7">61.00</oasis:entry>  
         <oasis:entry colname="col8">61.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.65</oasis:entry>  
         <oasis:entry colname="col2">6.00</oasis:entry>  
         <oasis:entry colname="col3">12.00</oasis:entry>  
         <oasis:entry colname="col4">16.00</oasis:entry>  
         <oasis:entry colname="col5">19.20</oasis:entry>  
         <oasis:entry colname="col6">23.50</oasis:entry>  
         <oasis:entry colname="col7">26.50</oasis:entry>  
         <oasis:entry colname="col8">29.30</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.80</oasis:entry>  
         <oasis:entry colname="col2">5.30</oasis:entry>  
         <oasis:entry colname="col3">10.20</oasis:entry>  
         <oasis:entry colname="col4">12.40</oasis:entry>  
         <oasis:entry colname="col5">16.20</oasis:entry>  
         <oasis:entry colname="col6">20.20</oasis:entry>  
         <oasis:entry colname="col7">23.30</oasis:entry>  
         <oasis:entry colname="col8">25.90</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1">0.88</oasis:entry>  
         <oasis:entry colname="col2">4.00</oasis:entry>  
         <oasis:entry colname="col3">7.40</oasis:entry>  
         <oasis:entry colname="col4">11.40</oasis:entry>  
         <oasis:entry colname="col5">16.00</oasis:entry>  
         <oasis:entry colname="col6">19.90</oasis:entry>  
         <oasis:entry colname="col7">22.60</oasis:entry>  
         <oasis:entry colname="col8">25.30</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry namest="col2" nameend="col8" align="center"><inline-formula><mml:math id="M457" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.05</oasis:entry>  
         <oasis:entry colname="col2">0.70</oasis:entry>  
         <oasis:entry colname="col3">0.70</oasis:entry>  
         <oasis:entry colname="col4">0.70</oasis:entry>  
         <oasis:entry colname="col5">0.70</oasis:entry>  
         <oasis:entry colname="col6">0.70</oasis:entry>  
         <oasis:entry colname="col7">0.70</oasis:entry>  
         <oasis:entry colname="col8">0.70</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.20</oasis:entry>  
         <oasis:entry colname="col2">0.40</oasis:entry>  
         <oasis:entry colname="col3">0.40</oasis:entry>  
         <oasis:entry colname="col4">0.40</oasis:entry>  
         <oasis:entry colname="col5">0.4 0</oasis:entry>  
         <oasis:entry colname="col6">0.40</oasis:entry>  
         <oasis:entry colname="col7">0.4 0</oasis:entry>  
         <oasis:entry colname="col8">0.40</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.35</oasis:entry>  
         <oasis:entry colname="col2">0.10</oasis:entry>  
         <oasis:entry colname="col3">0.10</oasis:entry>  
         <oasis:entry colname="col4">0.10</oasis:entry>  
         <oasis:entry colname="col5">0.10</oasis:entry>  
         <oasis:entry colname="col6">0.10</oasis:entry>  
         <oasis:entry colname="col7">0.10</oasis:entry>  
         <oasis:entry colname="col8">0.10</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.65</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M458" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.30</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M459" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.40</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M460" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.40</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M461" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.40</oasis:entry>  
         <oasis:entry colname="col6">0.20</oasis:entry>  
         <oasis:entry colname="col7">0.20</oasis:entry>  
         <oasis:entry colname="col8">0.20</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.80</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M462" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2.30</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M463" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2.50</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M464" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.50</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M465" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.20</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M466" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.80</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M467" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.30</oasis:entry>  
         <oasis:entry colname="col8">0.10</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">0.88</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M468" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2.50</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M469" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2.80</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M470" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.50</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M471" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.50</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M472" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.50</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M473" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.50</oasis:entry>  
         <oasis:entry colname="col8">0.00</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<?xmltex \floatpos{h}?><table-wrap id="App1.Ch1.T2"><caption><p>Equation (<xref ref-type="disp-formula" rid="Ch1.E9"/>) parameter values found for <inline-formula><mml:math id="M474" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve
<inline-formula><mml:math id="M475" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="5">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M476" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">0</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M477" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M478" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>8</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M479" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>12</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M480" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col5" align="center"><inline-formula><mml:math id="M481" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M482" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.05</oasis:entry>  
         <oasis:entry colname="col2">2.81</oasis:entry>  
         <oasis:entry colname="col3">2.86</oasis:entry>  
         <oasis:entry colname="col4">2.92</oasis:entry>  
         <oasis:entry colname="col5">3.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M483" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.20</oasis:entry>  
         <oasis:entry colname="col2">3.23</oasis:entry>  
         <oasis:entry colname="col3">3.53</oasis:entry>  
         <oasis:entry colname="col4">3.46</oasis:entry>  
         <oasis:entry colname="col5">2.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M484" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.35</oasis:entry>  
         <oasis:entry colname="col2">3.65</oasis:entry>  
         <oasis:entry colname="col3">4.40</oasis:entry>  
         <oasis:entry colname="col4">4.00</oasis:entry>  
         <oasis:entry colname="col5">2.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M485" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.65</oasis:entry>  
         <oasis:entry colname="col2">5.00</oasis:entry>  
         <oasis:entry colname="col3">8.00</oasis:entry>  
         <oasis:entry colname="col4">5.00</oasis:entry>  
         <oasis:entry colname="col5">2.00</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M486" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.88</oasis:entry>  
         <oasis:entry colname="col2">6.00</oasis:entry>  
         <oasis:entry colname="col3">11.0</oasis:entry>  
         <oasis:entry colname="col4">7.00</oasis:entry>  
         <oasis:entry colname="col5">1.90</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry namest="col2" nameend="col5" align="center"><inline-formula><mml:math id="M487" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M488" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.05</oasis:entry>  
         <oasis:entry colname="col2">8000.00</oasis:entry>  
         <oasis:entry colname="col3">8000.00</oasis:entry>  
         <oasis:entry colname="col4">8000.00</oasis:entry>  
         <oasis:entry colname="col5">8000.00</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M489" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.20</oasis:entry>  
         <oasis:entry colname="col2">350.00</oasis:entry>  
         <oasis:entry colname="col3">300.00</oasis:entry>  
         <oasis:entry colname="col4">100.00</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M490" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.60</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M491" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.35</oasis:entry>  
         <oasis:entry colname="col2">100.00</oasis:entry>  
         <oasis:entry colname="col3">50.00</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M492" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.00</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M493" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.60</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M494" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.65</oasis:entry>  
         <oasis:entry colname="col2">23.00</oasis:entry>  
         <oasis:entry colname="col3">12.00</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M495" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1.00</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M496" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.40</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M497" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.88</oasis:entry>  
         <oasis:entry colname="col2">7.00</oasis:entry>  
         <oasis:entry colname="col3">3.00</oasis:entry>  
         <oasis:entry colname="col4">0.55</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M498" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.20</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry namest="col2" nameend="col5" align="center"><inline-formula><mml:math id="M499" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M500" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.05</oasis:entry>  
         <oasis:entry colname="col2">0.40</oasis:entry>  
         <oasis:entry colname="col3">0.42</oasis:entry>  
         <oasis:entry colname="col4">0.40</oasis:entry>  
         <oasis:entry colname="col5">0.42</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M501" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.20</oasis:entry>  
         <oasis:entry colname="col2">0.32</oasis:entry>  
         <oasis:entry colname="col3">0.41</oasis:entry>  
         <oasis:entry colname="col4">0.50</oasis:entry>  
         <oasis:entry colname="col5">0.52</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M502" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.35</oasis:entry>  
         <oasis:entry colname="col2">0.25</oasis:entry>  
         <oasis:entry colname="col3">0.40</oasis:entry>  
         <oasis:entry colname="col4">0.58</oasis:entry>  
         <oasis:entry colname="col5">0.62</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M503" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.65</oasis:entry>  
         <oasis:entry colname="col2">0.00</oasis:entry>  
         <oasis:entry colname="col3">0.50</oasis:entry>  
         <oasis:entry colname="col4">0.67</oasis:entry>  
         <oasis:entry colname="col5">0.76</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M504" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.88</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M505" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.10</oasis:entry>  
         <oasis:entry colname="col3">0.58</oasis:entry>  
         <oasis:entry colname="col4">0.78</oasis:entry>  
         <oasis:entry colname="col5">0.85</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<?xmltex \hack{\clearpage}?><?xmltex \floatpos{h!}?><table-wrap id="App1.Ch1.T3"><?xmltex \hack{\hsize\textwidth}?><caption><p>Interpolation method for parameters in
Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>) (for <inline-formula><mml:math id="M506" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M507" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>). Interpolation
is done with respect to <inline-formula><mml:math id="M508" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> first, followed by
<inline-formula><mml:math id="M509" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>; the method for the
former is given in the upper part of the table, and the method for the latter
is in the lower part. Note the method is dependent on the independent
variable. Methods are represented by codes. The first number in each code is
1 if interpolation is done with respect to the <inline-formula><mml:math id="M510" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of parameter
values, in which case the interpolation result must be raised to the power
10 and is 0 if no logarithm is taken. The second number in each code is 1 if
the interpolation is done with respect to the <inline-formula><mml:math id="M511" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of the independent
variable, and is 0 if no logarithm is taken. The final letter represents the
form of the interpolation: L and S for linear and spline, respectively. For
<inline-formula><mml:math id="M512" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, when interpolating with respect to
<inline-formula><mml:math id="M513" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>, the interpolation
method depends on the value of this variable, which is denoted <inline-formula><mml:math id="M514" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="8">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="justify" colwidth="56.905512pt"/>
     <oasis:colspec colnum="3" colname="col3" align="justify" colwidth="56.905512pt"/>
     <oasis:colspec colnum="4" colname="col4" align="justify" colwidth="56.905512pt"/>
     <oasis:colspec colnum="5" colname="col5" align="justify" colwidth="28.452756pt"/>
     <oasis:colspec colnum="6" colname="col6" align="justify" colwidth="28.452756pt"/>
     <oasis:colspec colnum="7" colname="col7" align="justify" colwidth="28.452756pt"/>
     <oasis:colspec colnum="8" colname="col8" align="justify" colwidth="28.452756pt"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M515" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">0</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M516" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>2</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M517" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M518" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>6</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M519" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>8</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M520" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>10</oasis:entry>  
         <oasis:entry colname="col8"><inline-formula><mml:math id="M521" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>12</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M522" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col5" align="center">Method code </oasis:entry>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M523" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">00S</oasis:entry>  
         <oasis:entry colname="col3">00S</oasis:entry>  
         <oasis:entry colname="col4">00S</oasis:entry>  
         <oasis:entry colname="col5">00S</oasis:entry>  
         <oasis:entry colname="col6">00S</oasis:entry>  
         <oasis:entry colname="col7">00S</oasis:entry>  
         <oasis:entry colname="col8">00S</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M524" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">11L</oasis:entry>  
         <oasis:entry colname="col3">11L</oasis:entry>  
         <oasis:entry colname="col4">11L</oasis:entry>  
         <oasis:entry colname="col5">11L</oasis:entry>  
         <oasis:entry colname="col6">11L</oasis:entry>  
         <oasis:entry colname="col7">11L</oasis:entry>  
         <oasis:entry colname="col8">11L</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M525" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">00S</oasis:entry>  
         <oasis:entry colname="col3">00S</oasis:entry>  
         <oasis:entry colname="col4">00S</oasis:entry>  
         <oasis:entry colname="col5">00L</oasis:entry>  
         <oasis:entry colname="col6">00S</oasis:entry>  
         <oasis:entry colname="col7">00S</oasis:entry>  
         <oasis:entry colname="col8">00S</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M526" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M527" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">0.00</mml:mn><mml:mo>&lt;</mml:mo><mml:mn mathvariant="normal">0.27</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M528" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">0.27</mml:mn><mml:mo>&lt;</mml:mo><mml:mn mathvariant="normal">0.65</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M529" display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn mathvariant="normal">0.65</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M530" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col5" align="center">Method code </oasis:entry>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M531" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">01L (<inline-formula><mml:math id="M532" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01S (<inline-formula><mml:math id="M533" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col3">01L (<inline-formula><mml:math id="M534" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01S (<inline-formula><mml:math id="M535" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col4">01L (<inline-formula><mml:math id="M536" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01S (<inline-formula><mml:math id="M537" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M538" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">01S (<inline-formula><mml:math id="M539" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">8</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01L (<inline-formula><mml:math id="M540" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">8</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col3">11L (<inline-formula><mml:math id="M541" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01L (<inline-formula><mml:math id="M542" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col4">11L</oasis:entry>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M543" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">01S</oasis:entry>  
         <oasis:entry colname="col3">01S</oasis:entry>  
         <oasis:entry colname="col4">01S</oasis:entry>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<?xmltex \floatpos{h!}?><table-wrap id="App1.Ch1.T4"><?xmltex \hack{\hsize\textwidth}?><caption><p>Interpolation method for parameters in
Eq. (<xref ref-type="disp-formula" rid="Ch1.E9"/>) (for <inline-formula><mml:math id="M544" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>ve <inline-formula><mml:math id="M545" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>). Interpolation
is done with respect to <inline-formula><mml:math id="M546" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> first, followed by
<inline-formula><mml:math id="M547" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>; the method for the
former is given in the upper part of the table, and the method for the latter
is in the lower part. Note the method is dependent on the independent
variable. Methods are represented by codes. The first number in each code is
1 if interpolation is done with respect to the <inline-formula><mml:math id="M548" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of parameter
values, in which case the interpolation result must be raised to the power
10, and is 0 if no logarithm is taken. Because parameters are sometimes
negative, to gain a real result from the logarithm, a constant must be added
to the parameters first; if this is the case, this constant is given in
brackets beside the first code number (once interpolation is complete, this
constant is subtracted from the result after it has been raised to the power
10). The second number in each code is 1 if the interpolation is done with
respect to the <inline-formula><mml:math id="M549" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of the independent variable and is 0 if no
logarithm is taken. The final element represents the form of the
interpolation: L and S for linear and spline, respectively. For <inline-formula><mml:math id="M550" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, when
interpolating with respect to
<inline-formula><mml:math id="M551" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>, the interpolation
method depends on the value of this variable, which is denoted <inline-formula><mml:math id="M552" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup></mml:mrow></mml:math></inline-formula>.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="5">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="justify" colwidth="85.358268pt"/>
     <oasis:colspec colnum="3" colname="col3" align="justify" colwidth="85.358268pt"/>
     <oasis:colspec colnum="4" colname="col4" align="justify" colwidth="85.358268pt"/>
     <oasis:colspec colnum="5" colname="col5" align="justify" colwidth="56.905512pt"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M553" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">0</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M554" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>4</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M555" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>8</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math id="M556" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>12</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M557" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col5" align="center">Method code </oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M558" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">00L</oasis:entry>  
         <oasis:entry colname="col3">00L</oasis:entry>  
         <oasis:entry colname="col4">00L</oasis:entry>  
         <oasis:entry colname="col5">00L</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M559" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">11L</oasis:entry>  
         <oasis:entry colname="col3">11L</oasis:entry>  
         <oasis:entry colname="col4">1(2)1L</oasis:entry>  
         <oasis:entry colname="col5">1(2)0L</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M560" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">00L</oasis:entry>  
         <oasis:entry colname="col3">00L</oasis:entry>  
         <oasis:entry colname="col4">00L</oasis:entry>  
         <oasis:entry colname="col5">00L</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M561" display="inline"><mml:mrow><mml:mi mathvariant="normal">Δ</mml:mi><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M562" display="inline"><mml:mrow><mml:mo>&gt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.27</mml:mn><mml:mo>≤</mml:mo><mml:mn mathvariant="normal">0.00</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M563" display="inline"><mml:mrow><mml:mo>&gt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.65</mml:mn><mml:mo>≤</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.27</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M564" display="inline"><mml:mrow><mml:mo>≤</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.65</mml:mn></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col5"/>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M565" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry namest="col2" nameend="col5" align="center">Method code </oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M566" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">1</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">01L</oasis:entry>  
         <oasis:entry colname="col3">01L</oasis:entry>  
         <oasis:entry colname="col4">01L</oasis:entry>  
         <oasis:entry colname="col5"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M567" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">1(2.0)1S (<inline-formula><mml:math id="M568" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">8</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01L (<inline-formula><mml:math id="M569" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo></mml:mrow></mml:math></inline-formula>8)</oasis:entry>  
         <oasis:entry colname="col3">1(2.0)1S (<inline-formula><mml:math id="M570" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>01L (<inline-formula><mml:math id="M571" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col4">1(1.1)1S (<inline-formula><mml:math id="M572" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≥</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">6</mml:mn><mml:mo>,</mml:mo><mml:mspace linebreak="nobreak" width="1em"/><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>≤</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula>)<?xmltex \hack{\hfill\break}?>1(2.0)1L (<inline-formula><mml:math id="M573" display="inline"><mml:mrow><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&gt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">4</mml:mn><mml:mo>,</mml:mo><mml:mspace linebreak="nobreak" width="1em"/><mml:msubsup><mml:mi>D</mml:mi><mml:mi>r</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">6</mml:mn></mml:mrow></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col5"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M574" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">1(2.0)1S</oasis:entry>  
         <oasis:entry colname="col3">1(2.0)1S</oasis:entry>  
         <oasis:entry colname="col4">1(2.0)1S</oasis:entry>  
         <oasis:entry colname="col5"/>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<?xmltex \hack{\clearpage}?>
      <p><table-wrap id="Taba" position="anchor"><oasis:table><oasis:tgroup cols="2">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">Nomenclature</oasis:entry>  
         <oasis:entry colname="col2"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M575" display="inline"><mml:mi>a</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Particle-phase bulk</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M576" display="inline"><mml:mi>A</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Area (m<inline-formula><mml:math id="M577" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">con</oasis:entry>  
         <oasis:entry colname="col2">Denotes a constant value</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M578" display="inline"><mml:mi>C</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Concentration (mol m<inline-formula><mml:math id="M579" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (particle))</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M580" display="inline"><mml:mover accent="true"><mml:mi>C</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Concentration in bulk part of a phase (mol m<inline-formula><mml:math id="M581" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air))</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M582" display="inline"><mml:mrow><mml:mi>C</mml:mi><mml:mo>*</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Effective saturation vapour concentration (mol m<inline-formula><mml:math id="M583" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (air))</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M584" display="inline"><mml:mrow><mml:msub><mml:mi>C</mml:mi><mml:mi>D</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Diffusion coefficient correction</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M585" display="inline"><mml:mi>D</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Diffusion coefficient (m<inline-formula><mml:math id="M586" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M587" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">eff</oasis:entry>  
         <oasis:entry colname="col2">Denotes an effective value</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">eq</oasis:entry>  
         <oasis:entry colname="col2">Equilibrium state</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Fi-PaD</oasis:entry>  
         <oasis:entry colname="col2">Fick's second law solved by partial differential equation</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M588" display="inline"><mml:mi>g</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Gas phase</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M589" display="inline"><mml:mi>i</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">A component</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M590" display="inline"><mml:mi>j</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">All components</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M591" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Chemical reaction rate (m<inline-formula><mml:math id="M592" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> molecule<inline-formula><mml:math id="M593" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> s<inline-formula><mml:math id="M594" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M595" display="inline"><mml:mrow><mml:msub><mml:mi>k</mml:mi><mml:mi>t</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Condensation sink rate (s<inline-formula><mml:math id="M596" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M597" display="inline"><mml:mi>K</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Mass transfer coefficient (m s<inline-formula><mml:math id="M598" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M599" display="inline"><mml:mi>m</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Index for size bin</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M600" display="inline"><mml:mi>M</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Molar mass (g mol<inline-formula><mml:math id="M601" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">MOSAIC</oasis:entry>  
         <oasis:entry colname="col2">Model for Simulating Aerosol Interactions and Chemistry</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M602" display="inline"><mml:mi>N</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Particle number concentration (m<inline-formula><mml:math id="M603" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> air)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">nv</oasis:entry>  
         <oasis:entry colname="col2">Non-volatile component</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M604" display="inline"><mml:mi mathvariant="italic">ρ</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Density (g m<inline-formula><mml:math id="M605" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M606" display="inline"><mml:mrow><mml:msub><mml:mi>p</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Correction equation parameter</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M607" display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Subscript denotes particle phase</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M608" display="inline"><mml:mi>r</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Radius (m)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">rat</oasis:entry>  
         <oasis:entry colname="col2">Denotes a ratio</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M609" display="inline"><mml:mrow><mml:msub><mml:mi>R</mml:mi><mml:mi mathvariant="normal">p</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Total particle radius (<inline-formula><mml:math id="M610" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M611" display="inline"><mml:mi>s</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Particle-phase surface</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">sv</oasis:entry>  
         <oasis:entry colname="col2">Semi-volatile component</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M612" display="inline"><mml:mi>t</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Time (s)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M613" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>e</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M614" display="inline"><mml:mi>e</mml:mi></mml:math></inline-formula>-folding time (s)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M615" display="inline"><mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>n</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">A time after <inline-formula><mml:math id="M616" display="inline"><mml:mi>n</mml:mi></mml:math></inline-formula> number of time steps (s)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M617" display="inline"><mml:mrow><mml:msub><mml:mi>v</mml:mi><mml:mi>d</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Deposition velocity (m s<inline-formula><mml:math id="M618" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M619" display="inline"><mml:mrow><mml:msub><mml:mi>V</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Molar volume (m<inline-formula><mml:math id="M620" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> mol<inline-formula><mml:math id="M621" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math id="M622" display="inline"><mml:mi>x</mml:mi></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">Mole fraction</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap></p>

      <?xmltex \floatpos{h!}?><fig id="App1.Ch1.F1"><caption><p>The logarithm of the ratio of the diffusion coefficient throughout
an example particle to the self-diffusion coefficient of the non-volatile
component, from the particle centre (at 0 m) to its surface. In this
example, <inline-formula><mml:math id="M623" display="inline"><mml:mrow><mml:msub><mml:mi>log⁡</mml:mi><mml:mn mathvariant="normal">10</mml:mn></mml:msub><mml:mo>(</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">nv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>/</mml:mo><mml:msubsup><mml:mi>D</mml:mi><mml:mi mathvariant="normal">sv</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msubsup><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mo>-</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula>,
<inline-formula><mml:math id="M624" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">eq</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> = 0 and initial <inline-formula><mml:math id="M625" display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mrow><mml:mi mathvariant="normal">s</mml:mi><mml:mo>,</mml:mo><mml:mi mathvariant="normal">sv</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> = 0.88.</p></caption>
        <?xmltex \igopts{width=142.26378pt}?><graphic xlink:href="https://acp.copernicus.org/articles/17/10477/2017/acp-17-10477-2017-f12.pdf"/>

      </fig>

<?xmltex \hack{\clearpage}?>
</app>
  </app-group><notes notes-type="authorcontribution">

      <p>SO'M completed the practical work of the investigation
and wrote the manuscript. RAZ provided the MOSAIC code and assistance in its
employment. All authors contributed to devising the methodology, result
output and manuscript.</p>
  </notes><notes notes-type="competinginterests">

      <p>The authors declare that they have no conflict of
interest.</p>
  </notes><ack><title>Acknowledgements</title><p>The PhD of Simon O'Meara  was funded by the Natural Environment Research Council award
NE/K500859/1. This work was also funded by the Natural Environment Research
Council award NE/M003531/1. Participation of Rahul A. Zaveri in this study was supported
by the US Department of Energy (DOE) Atmospheric System Research (ASR)
Program under contract DE-AC06-76RLO 1830 at the Pacific Northwest National
Laboratory.<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?> Edited by: Kari
Lehtinen<?xmltex \hack{\newline}?> Reviewed by: two anonymous referees</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bibx1"><label>Barley et al.(2011)</label><mixed-citation>Barley, M. H., Topping, D., Lowe, D., Utembe, S., and McFiggans, G.: The
sensitivity of secondary organic aerosol (SOA) component partitioning to the
predictions of component properties – Part 3: Investigation of condensed
compounds generated by a near-explicit model of VOC oxidation, Atmos. Chem.
Phys., 11, 13145–13159, <ext-link xlink:href="https://doi.org/10.5194/acp-11-13145-2011" ext-link-type="DOI">10.5194/acp-11-13145-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx2"><label>Berkemeier et al.(2013)</label><mixed-citation>Berkemeier, T., Huisman, A. J., Ammann, M., Shiraiwa, M., Koop, T., and
Pöschl, U.: Kinetic regimes and limiting cases of gas uptake and
heterogeneous reactions in atmospheric aerosols and clouds: a general
classification scheme, Atmos. Chem. Phys., 13, 6663–6686,
<ext-link xlink:href="https://doi.org/10.5194/acp-13-6663-2013" ext-link-type="DOI">10.5194/acp-13-6663-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx3"><label>Boucher et al.(2013)</label><mixed-citation>
Boucher, O., Randall, D., Artaxo, P., Bretherton, C., Feingold, G., Forster,
P., Kerminen, V.-M., Kondo, Y., Liao, H., Lohmann, U., Rasch, P., Satheesh,
S., Sherwood, S., Stevens, B., and Zhang, X.: Clouds and
Aerosols, in: Climate Change 2013: The Physical Science Basis.
Contribution of Working Group I to the Fifth
Assessment Report of the
Intergovernmental Panel on Climate
Change, edited by: Stocker, T., Qin, D., Plattner, G.-K., Tignor,
M., Allen, S., Boschung, J., Nauels, A., Xia, Y., Bex, V., and Midgley, P.,
Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA,
2013.</mixed-citation></ref>
      <ref id="bib1.bibx4"><label>Crank(1975)</label><mixed-citation>
Crank, J.: The Mathematics of Diffusion, 2 Edn., Clarendon
Press, Oxford, 1975.</mixed-citation></ref>
      <ref id="bib1.bibx5"><label>Donahue et al.(2006)</label><mixed-citation>Donahue, N., Robinson, A., Stanier, C., and Pandis, S.: Coupled partitioning,
dilution and chemical ageing of semivolatile organics, Environ. Sci.
Technol., 40, 2635–2643, <ext-link xlink:href="https://doi.org/10.1021/es052297c" ext-link-type="DOI">10.1021/es052297c</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx6"><label>Ehn et al.(2014)</label><mixed-citation>Ehn, M., Thornton, J., Kleist, E., Sipilä, M., Junninen, H., Pullinen,
I.,
Springer, M., Rubach, F., Tillmann, R., Lee, B., Lopez-Hilfiker, F., Andres,
S., Acir, I., Rissanen, M., Jokinen, T., Schobesberger, S., Kangasluoma, J.,
Kontkanen, J., Nieminen, T., Kurtén, T., Nielsen, L. B., Jørgensen,
S., Kjaergaard, H., Canagaratna, M., Maso, M., Berndt, T., Petäjä,
T., Wahner, A., Kerminen, V., Kulmala, M., Worsnop, D., Wildt, J., and
Mentel, T.: A large source of low-volatility secondary organic aerosol,
Nature, 506, 476–479, <ext-link xlink:href="https://doi.org/10.1038/nature13032" ext-link-type="DOI">10.1038/nature13032</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx7"><label>Fiore et al.(2012)</label><mixed-citation>
Fiore, A., Naik, V., Spracklen, D., Steiner, A., Unger, N., Prather, M.,
Bergmann, D., Cameron-Smith, P., Cionni, I., Collins, W., Dalsøren, S.,
Eyring, V., Folberth, G., Ginoux, P., Horowitz, L., Josse, B., Lamarque, J.,
MacKenzie, I., Nagashima, T., O'Connor, F., Righi, M., Rumbold, S., Shindell,
D., Skeie, R., Sudo, K., Szopa, S., Takemura, T., and Zeng, G.: Global air
quality and climate, Chem. Soc. Rev., 41, 6663–6683, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx8"><label>Glotfelty et al.(2016)</label><mixed-citation>Glotfelty, T., Zhang, Y., Karamchandani, P., and Streets, D.: Changes in
future
air quality, deposition, and aerosol-cloud interactions under future climate
and emission scenarios, Atmos. Environ., 139, 176–191,
<ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2016.05.008" ext-link-type="DOI">10.1016/j.atmosenv.2016.05.008</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bibx9"><label>Jacobson and Streets(2009)</label><mixed-citation>Jacobson, M. and Streets, D.: Influence of future anthropogenic emissions on
climate, natural emissions, and air quality, J. Geophys. Res., 114, D08118,
<ext-link xlink:href="https://doi.org/10.1029/2008JD011476" ext-link-type="DOI">10.1029/2008JD011476</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx10"><label>Koop et al.(2011)</label><mixed-citation>Koop, T., Bookhold, J., Shiraiwa, M., and Pöschl, U.: Glass transition
and
phase state of organic compounds: dependency on molecular properties and
implications for secondary organic aerosols in the atmosphere, Phys. Chem.
Chem. Phys., 13, 19238–19255, <ext-link xlink:href="https://doi.org/10.1039/c1cp22617g" ext-link-type="DOI">10.1039/c1cp22617g</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx11"><label>Krishna and Wesselingh(1997)</label><mixed-citation>Krishna, R. and Wesselingh, J.: The Maxwell-Stefan
approach to mass transfer, Chem. Eng. Sci., 52, 861–911,
<ext-link xlink:href="https://doi.org/10.1016/S0009-2509(96)00458-7" ext-link-type="DOI">10.1016/S0009-2509(96)00458-7</ext-link>, 1997.</mixed-citation></ref>
      <ref id="bib1.bibx12"><label>Kroll and Seinfeld(2008)</label><mixed-citation>Kroll, J. and Seinfeld, J.: Chemistry of secondary organic aerosol: formation
and evolution of low-volatility organics in the atmosphere, Atmos. Environ.,
42, 3593–3624, <ext-link xlink:href="https://doi.org/10.1016/j.atmosenv.2008.01.003" ext-link-type="DOI">10.1016/j.atmosenv.2008.01.003</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx13"><label>Lienhard et al.(2014)</label><mixed-citation>Lienhard, D., Huisman, A., Bones, D., Te, Y., Luo, B., Krieger, U., and Reid,
J.: Retrieving the translational diffusion coefficient of water from
experiments of single levitated aerosol droplets, Phys. Chem. Chem. Phys.,
16, 16677–16683, <ext-link xlink:href="https://doi.org/10.1039/c4cp01939c" ext-link-type="DOI">10.1039/c4cp01939c</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx14"><label>Mai et al.(2015)</label><mixed-citation>Mai, H., Shiraiwa, M., Flagan, R., and Seinfeld, J.: Under what conditions
can
equilibrium gas-particle partitioning be expected to hold in the atmosphere?,
Environ. Sci. Technol., 49, 11485–11491, <ext-link xlink:href="https://doi.org/10.1021/acs.est.5b02587" ext-link-type="DOI">10.1021/acs.est.5b02587</ext-link>,
2015.</mixed-citation></ref>
      <ref id="bib1.bibx15"><label>O'Meara et al.(2016)</label><mixed-citation>O'Meara, S., Topping, D. O., and McFiggans, G.: The rate of equilibration of
viscous aerosol particles, Atmos. Chem. Phys., 16, 5299–5313,
<ext-link xlink:href="https://doi.org/10.5194/acp-16-5299-2016" ext-link-type="DOI">10.5194/acp-16-5299-2016</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bibx16"><label>O'Meara et al.(2017)</label><mixed-citation>O'Meara, S., Topping, D., Zaveri, R., McFiggans, G.: Model Code and MOSAIC
Results for the Paper “An efficient approach for treating
composition-dependent diffusion within organic particles”,
<uri>https://github.com/simonom/Dcorr</uri>, 2017.</mixed-citation></ref>
      <ref id="bib1.bibx17"><label>Price et al.(2015)</label><mixed-citation>Price, C., Mattsson, J., Zhang, Y., Bertram, A., Davies, J., Grayson, J., ,
Martin, S., O'Sullivan, D., Reid, J., Rickards, A., and Murray, B.: Water
diffusion in atmospherically relevant <inline-formula><mml:math id="M626" display="inline"><mml:mi mathvariant="italic">α</mml:mi></mml:math></inline-formula>-pinene secondary organic
material, Chem. Sci., 6, 4876–4883, <ext-link xlink:href="https://doi.org/10.1039/C5SC00685F" ext-link-type="DOI">10.1039/C5SC00685F</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bibx18"><label>Saukko et al.(2012)</label><mixed-citation>Saukko, E., Lambe, A., Massoli, P., Koop, T., Wright, J., Croasdale, D.,
Pedernera, D., Onasch, T., Laaksonen, A., Davidovits, P., Worsnop, D., and
Virtanen, A.: Humidity-dependent phase state of SOA particles
from biogenic and anthropogenic precursors, Atmos. Chem. Phys., 12,
7517–7529, <ext-link xlink:href="https://doi.org/10.5194/acp-12-7517-2012" ext-link-type="DOI">10.5194/acp-12-7517-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx19"><label>Sehmel(1980)</label><mixed-citation>Sehmel, G.: Particle and gas dry deposition: a review, Atmos. Environ., 14,
983–1011, <ext-link xlink:href="https://doi.org/10.1016/0004-6981(80)90031-1" ext-link-type="DOI">10.1016/0004-6981(80)90031-1</ext-link>, 1980.</mixed-citation></ref>
      <ref id="bib1.bibx20"><label>Sellegri et al.(2005)</label><mixed-citation>Sellegri, K., Hanke, M., Umann, B., Arnold, F., and Kulmala, M.: Measurements
of organic gases during aerosol formation events in the boreal forest
atmosphere during QUEST, Atmos. Chem. Phys., 5, 373–384,
<ext-link xlink:href="https://doi.org/10.5194/acp-5-373-2005" ext-link-type="DOI">10.5194/acp-5-373-2005</ext-link>, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx21"><label>Shiraiwa et al.(2012)</label><mixed-citation>Shiraiwa, M., Pfrang, C., Koop, T., and Pöschl, U.: Kinetic multi-layer
model of gas-particle interactions in aerosols and clouds (KM-GAP): linking
condensation, evaporation and chemical reactions of organics, oxidants and
water, Atmos. Chem. Phys., 12, 2777–2794,
<ext-link xlink:href="https://doi.org/10.5194/acp-12-2777-2012" ext-link-type="DOI">10.5194/acp-12-2777-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx22"><label>Smith et al.(2003)</label><mixed-citation>Smith, G., Woods, E., Baer, T., and Miller, R.: Aerosol uptake described by
numerical solution of the diffusion-reaction equations in the particle, J.
Phys. Chem. A, 107, 9582–9587, <ext-link xlink:href="https://doi.org/10.1021/jp021843a" ext-link-type="DOI">10.1021/jp021843a</ext-link>, 2003.</mixed-citation></ref>
      <ref id="bib1.bibx23"><label>Starr et al.(1999)</label><mixed-citation>Starr, F., Sciortino, F., and Stanley, H.: Dynamics of simulated water under
pressure, Phys. Rev. E, 60, 6757–6768, <ext-link xlink:href="https://doi.org/10.1103/PhysRevE.60.6757" ext-link-type="DOI">10.1103/PhysRevE.60.6757</ext-link>, 1999.</mixed-citation></ref>
      <ref id="bib1.bibx24"><label>Steimer et al.(2015)</label><mixed-citation>Steimer, S. S., Krieger, U. K., Te, Y.-F., Lienhard, D. M., Huisman, A. J.,
Luo, B. P., Ammann, M., and Peter, T.: Electrodynamic balance measurements of
thermodynamic, kinetic, and optical aerosol properties inaccessible to bulk
methods, Atmos. Meas. Tech., 8, 2397–2408,
<ext-link xlink:href="https://doi.org/10.5194/amt-8-2397-2015" ext-link-type="DOI">10.5194/amt-8-2397-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bibx25"><label>Taylor and Krishna(1993)</label><mixed-citation>
Taylor, R. and Krishna, R.: Multicomponent Mass Transfer, John Wiley and
Sons, Inc., New York, 1993.</mixed-citation></ref>
      <ref id="bib1.bibx26"><label>Topping et al.(2011)</label><mixed-citation>Topping, D. O., Barley, M. H., and McFiggans, G.: The sensitivity of
Secondary Organic Aerosol component partitioning to the predictions of
component properties – Part 2: Determination of particle hygroscopicity and
its dependence on “apparent” volatility, Atmos. Chem. Phys., 11,
7767–7779, <ext-link xlink:href="https://doi.org/10.5194/acp-11-7767-2011" ext-link-type="DOI">10.5194/acp-11-7767-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx27"><label>Topping et al.(2013)</label><mixed-citation>Topping, D., Barley, M., and McFiggans, G.: Including phase separation in a
unified model to calculate partitioning of vapours to mixed inorganic-organic
aerosol particles, Faraday Discuss., 165, 273–288, <ext-link xlink:href="https://doi.org/10.1039/C3FD00047H" ext-link-type="DOI">10.1039/C3FD00047H</ext-link>,
2013.</mixed-citation></ref>
      <ref id="bib1.bibx28"><label>Tröstl et al.(2016)</label><mixed-citation>Tröstl, J., Chuang, W., Gordon, H., Heinritzi, M., Yan, C., Molteni, U.,
Ahlm, L., Frege, C., Bianchi, F., Wagner, R., Simon, M., Lehtipalo, K.,
Williamson, C., Craven, J., Duplissy, J., Adamov, A., Almeida, J.,
Bernhammer, A.-K., Breitenlechner, M., Brilke, S., Dias, A., Ehrhart, S.,
Flagan, R., Franchin, A., Fuchs, C., Guida, R., Gysel, M., Hansel, A., Hoyle,
C., Jokinen, T., Junninen, H., Kangasluoma, J., Keskinen, H., Kim, J., Krapf,
M., Kürten, A., Laaksonen, A., Lawler, M., Leiminger, M., Mathot, S.,
Möhler, O., Nieminen, T., Onnela, A., Petäjä, T., Piel, F.,
Miettinen, P., Rissanen, M., Rondo, L., Sarnela, N., Schobesberger, S.,
Sengupta, K., Sipilä, M., Smith, J., Steiner, G., Tomé, A., Virtanen,
A., Wagner, A., Weingartner, E., Wimmer, D., Winkler, P., Ye, P., Carslaw,
K., Curtius, J., Dommen, J., Kirkby, J., Kulmala, M., Riipinen, I., Worsnop,
D., Donahue, N., and Baltensperger, U.: The role of low-volatility organic
compounds for initial particle growth in the atmosphere, Nature, 506,
527–531, <ext-link xlink:href="https://doi.org/10.1038/nature18271" ext-link-type="DOI">10.1038/nature18271</ext-link>, 2016.
</mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bibx29"><label>Vaden et al.(2011)</label><mixed-citation>Vaden, T., Imre, D., Beránek, J., Shrivastava, M., and Zelenyuk, A.:
Evaporation kinetics and phase of laboratory and ambient secondary organic
aerosol, P. Natl. Acad. Sci. USA, 108, 2190–2195,
<ext-link xlink:href="https://doi.org/10.1073/pnas.1013391108" ext-link-type="DOI">10.1073/pnas.1013391108</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx30"><label>Vignes(1966)</label><mixed-citation>Vignes, A.: Diffusion in binary solutions, Ind. Eng. Chem. Fund., 5,
189–199,
<ext-link xlink:href="https://doi.org/10.1021/i160018a007" ext-link-type="DOI">10.1021/i160018a007</ext-link>, 1966.</mixed-citation></ref>
      <ref id="bib1.bibx31"><label>Virtanen et al.(2010)</label><mixed-citation>Virtanen, A., Joutsensaari, J., Koop, T., Kannosto, J., Yli-Pirilä, P.,
Leskinen, J., Mäkelä, J., Holopainen, J., Pöschl, U., Kulmala,
M., Worsnop, D., and Laaksonen, A.: An amorphous solid state of biogenic
secondary organic aerosol particles, Nature, 467, 824–827,
<ext-link xlink:href="https://doi.org/10.1038/nature09455" ext-link-type="DOI">10.1038/nature09455</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx32"><label>Whitehead et al.(2012)</label><mixed-citation>Whitehead, J., Dorsey, J., Gallagher, M., Flynn, M., McFiggans, G., and
Carpenter, L.: Particle fluxes and condensational uptake over sea ice during
COBRA, J. Geophys. Res., 117, D15202,
<ext-link xlink:href="https://doi.org/10.1029/2012JD017798" ext-link-type="DOI">10.1029/2012JD017798</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx33"><label>Zaveri et al.(2008)</label><mixed-citation>Zaveri, R., Easter, R., Fast, J., and Peters, L.: Model for
Simulating Aerosol Interactions and
Chemistry (MOSAIC), J. Geophys. Res., 113, D13204,
<ext-link xlink:href="https://doi.org/10.1029/2007JD008782" ext-link-type="DOI">10.1029/2007JD008782</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx34"><label>Zaveri et al.(2014)</label><mixed-citation>Zaveri, R. A., Easter, R. C., Shilling, J. E., and Seinfeld, J. H.: Modeling
kinetic partitioning of secondary organic aerosol and size distribution
dynamics: representing effects of volatility, phase state, and particle-phase
reaction, Atmos. Chem. Phys., 14, 5153–5181,
<ext-link xlink:href="https://doi.org/10.5194/acp-14-5153-2014" ext-link-type="DOI">10.5194/acp-14-5153-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx35"><label>Ziemann and Atkinson(2012)</label><mixed-citation>Ziemann, P. and Atkinson, R.: Kinetics, products, and mechanisms of secondary
organic aerosol formation, Chem. Soc. Rev., 41, 6582–6605,
<ext-link xlink:href="https://doi.org/10.1039/c2cs35122f" ext-link-type="DOI">10.1039/c2cs35122f</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx36"><label>Zobrist et al.(2008)</label><mixed-citation>Zobrist, B., Marcolli, C., Pedernera, D. A., and Koop, T.: Do atmospheric
aerosols form glasses?, Atmos. Chem. Phys., 8, 5221–5244,
<ext-link xlink:href="https://doi.org/10.5194/acp-8-5221-2008" ext-link-type="DOI">10.5194/acp-8-5221-2008</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx37"><label>Zobrist et al.(2011)</label><mixed-citation>Zobrist, B., Soonsin, V., Luo, B., Krieger, U., Marcolli, C., Peter, T., and
Koop, T.: Ultra-slow water diffusion in aqueous sucrose glasses, Phys. Chem.
Chem. Phys., 13, 3514–3526, <ext-link xlink:href="https://doi.org/10.1039/c0cp01273d" ext-link-type="DOI">10.1039/c0cp01273d</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx38"><label>Zuend et al.(2008)</label><mixed-citation>Zuend, A., Marcolli, C., Luo, B. P., and Peter, T.: A thermodynamic model of
mixed organic-inorganic aerosols to predict activity coefficients, Atmos.
Chem. Phys., 8, 4559–4593, <ext-link xlink:href="https://doi.org/10.5194/acp-8-4559-2008" ext-link-type="DOI">10.5194/acp-8-4559-2008</ext-link>, 2008.</mixed-citation></ref>

  </ref-list><app-group content-type="float"><app><title/>

    </app></app-group></back>
    <!--<article-title-html>An efficient approach for treating composition-dependent diffusion within organic particles</article-title-html>
<abstract-html><p class="p">Mounting evidence demonstrates that under certain conditions the
rate of component partitioning between the gas and particle phase in
atmospheric organic aerosol is limited by particle-phase diffusion. To date,
however, particle-phase diffusion has not been incorporated into regional
atmospheric models. An analytical rather than numerical solution to diffusion
through organic particulate matter is desirable because of its comparatively
small computational expense in regional models. Current analytical models
assume diffusion to be independent of composition and therefore use a
constant diffusion coefficient. To realistically model diffusion, however, it
should be composition-dependent (e.g. due to the partitioning of components
that plasticise, vitrify or solidify). This study assesses the modelling
capability of an analytical solution to diffusion corrected to account for
composition dependence against a numerical solution. Results show reasonable
agreement when the gas-phase saturation ratio of a partitioning component is
constant and particle-phase diffusion limits partitioning rate ( &lt;  10 %
discrepancy in estimated radius change). However, when the saturation ratio
of the partitioning component varies, a generally applicable correction
cannot be found, indicating that existing methodologies are incapable of
deriving a general solution. Until such time as a general solution is found,
caution should be given to sensitivity studies that assume constant
diffusivity. The correction was implemented in the polydisperse, multi-process
Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) and is used
to illustrate how the evolution of number size distribution may be
accelerated by condensation of a plasticising component onto viscous organic
particles.</p></abstract-html>
<ref-html id="bib1.bib1"><label>Barley et al.(2011)</label><mixed-citation>
Barley, M. H., Topping, D., Lowe, D., Utembe, S., and McFiggans, G.: The
sensitivity of secondary organic aerosol (SOA) component partitioning to the
predictions of component properties – Part 3: Investigation of condensed
compounds generated by a near-explicit model of VOC oxidation, Atmos. Chem.
Phys., 11, 13145–13159, <a href="https://doi.org/10.5194/acp-11-13145-2011" target="_blank">https://doi.org/10.5194/acp-11-13145-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>Berkemeier et al.(2013)</label><mixed-citation>
Berkemeier, T., Huisman, A. J., Ammann, M., Shiraiwa, M., Koop, T., and
Pöschl, U.: Kinetic regimes and limiting cases of gas uptake and
heterogeneous reactions in atmospheric aerosols and clouds: a general
classification scheme, Atmos. Chem. Phys., 13, 6663–6686,
<a href="https://doi.org/10.5194/acp-13-6663-2013" target="_blank">https://doi.org/10.5194/acp-13-6663-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>Boucher et al.(2013)</label><mixed-citation>
Boucher, O., Randall, D., Artaxo, P., Bretherton, C., Feingold, G., Forster,
P., Kerminen, V.-M., Kondo, Y., Liao, H., Lohmann, U., Rasch, P., Satheesh,
S., Sherwood, S., Stevens, B., and Zhang, X.: Clouds and
Aerosols, in: Climate Change 2013: The Physical Science Basis.
Contribution of Working Group I to the Fifth
Assessment Report of the
Intergovernmental Panel on Climate
Change, edited by: Stocker, T., Qin, D., Plattner, G.-K., Tignor,
M., Allen, S., Boschung, J., Nauels, A., Xia, Y., Bex, V., and Midgley, P.,
Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA,
2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>Crank(1975)</label><mixed-citation>
Crank, J.: The Mathematics of Diffusion, 2 Edn., Clarendon
Press, Oxford, 1975.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>Donahue et al.(2006)</label><mixed-citation>
Donahue, N., Robinson, A., Stanier, C., and Pandis, S.: Coupled partitioning,
dilution and chemical ageing of semivolatile organics, Environ. Sci.
Technol., 40, 2635–2643, <a href="https://doi.org/10.1021/es052297c" target="_blank">https://doi.org/10.1021/es052297c</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>Ehn et al.(2014)</label><mixed-citation>
Ehn, M., Thornton, J., Kleist, E., Sipilä, M., Junninen, H., Pullinen,
I.,
Springer, M., Rubach, F., Tillmann, R., Lee, B., Lopez-Hilfiker, F., Andres,
S., Acir, I., Rissanen, M., Jokinen, T., Schobesberger, S., Kangasluoma, J.,
Kontkanen, J., Nieminen, T., Kurtén, T., Nielsen, L. B., Jørgensen,
S., Kjaergaard, H., Canagaratna, M., Maso, M., Berndt, T., Petäjä,
T., Wahner, A., Kerminen, V., Kulmala, M., Worsnop, D., Wildt, J., and
Mentel, T.: A large source of low-volatility secondary organic aerosol,
Nature, 506, 476–479, <a href="https://doi.org/10.1038/nature13032" target="_blank">https://doi.org/10.1038/nature13032</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>Fiore et al.(2012)</label><mixed-citation>
Fiore, A., Naik, V., Spracklen, D., Steiner, A., Unger, N., Prather, M.,
Bergmann, D., Cameron-Smith, P., Cionni, I., Collins, W., Dalsøren, S.,
Eyring, V., Folberth, G., Ginoux, P., Horowitz, L., Josse, B., Lamarque, J.,
MacKenzie, I., Nagashima, T., O'Connor, F., Righi, M., Rumbold, S., Shindell,
D., Skeie, R., Sudo, K., Szopa, S., Takemura, T., and Zeng, G.: Global air
quality and climate, Chem. Soc. Rev., 41, 6663–6683, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>Glotfelty et al.(2016)</label><mixed-citation>
Glotfelty, T., Zhang, Y., Karamchandani, P., and Streets, D.: Changes in
future
air quality, deposition, and aerosol-cloud interactions under future climate
and emission scenarios, Atmos. Environ., 139, 176–191,
<a href="https://doi.org/10.1016/j.atmosenv.2016.05.008" target="_blank">https://doi.org/10.1016/j.atmosenv.2016.05.008</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>Jacobson and Streets(2009)</label><mixed-citation>
Jacobson, M. and Streets, D.: Influence of future anthropogenic emissions on
climate, natural emissions, and air quality, J. Geophys. Res., 114, D08118,
<a href="https://doi.org/10.1029/2008JD011476" target="_blank">https://doi.org/10.1029/2008JD011476</a>, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>Koop et al.(2011)</label><mixed-citation>
Koop, T., Bookhold, J., Shiraiwa, M., and Pöschl, U.: Glass transition
and
phase state of organic compounds: dependency on molecular properties and
implications for secondary organic aerosols in the atmosphere, Phys. Chem.
Chem. Phys., 13, 19238–19255, <a href="https://doi.org/10.1039/c1cp22617g" target="_blank">https://doi.org/10.1039/c1cp22617g</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>Krishna and Wesselingh(1997)</label><mixed-citation>
Krishna, R. and Wesselingh, J.: The Maxwell-Stefan
approach to mass transfer, Chem. Eng. Sci., 52, 861–911,
<a href="https://doi.org/10.1016/S0009-2509(96)00458-7" target="_blank">https://doi.org/10.1016/S0009-2509(96)00458-7</a>, 1997.
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>Kroll and Seinfeld(2008)</label><mixed-citation>
Kroll, J. and Seinfeld, J.: Chemistry of secondary organic aerosol: formation
and evolution of low-volatility organics in the atmosphere, Atmos. Environ.,
42, 3593–3624, <a href="https://doi.org/10.1016/j.atmosenv.2008.01.003" target="_blank">https://doi.org/10.1016/j.atmosenv.2008.01.003</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>Lienhard et al.(2014)</label><mixed-citation>
Lienhard, D., Huisman, A., Bones, D., Te, Y., Luo, B., Krieger, U., and Reid,
J.: Retrieving the translational diffusion coefficient of water from
experiments of single levitated aerosol droplets, Phys. Chem. Chem. Phys.,
16, 16677–16683, <a href="https://doi.org/10.1039/c4cp01939c" target="_blank">https://doi.org/10.1039/c4cp01939c</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>Mai et al.(2015)</label><mixed-citation>
Mai, H., Shiraiwa, M., Flagan, R., and Seinfeld, J.: Under what conditions
can
equilibrium gas-particle partitioning be expected to hold in the atmosphere?,
Environ. Sci. Technol., 49, 11485–11491, <a href="https://doi.org/10.1021/acs.est.5b02587" target="_blank">https://doi.org/10.1021/acs.est.5b02587</a>,
2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>O'Meara et al.(2016)</label><mixed-citation>
O'Meara, S., Topping, D. O., and McFiggans, G.: The rate of equilibration of
viscous aerosol particles, Atmos. Chem. Phys., 16, 5299–5313,
<a href="https://doi.org/10.5194/acp-16-5299-2016" target="_blank">https://doi.org/10.5194/acp-16-5299-2016</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>O'Meara et al.(2017)</label><mixed-citation>
O'Meara, S., Topping, D., Zaveri, R., McFiggans, G.: Model Code and MOSAIC
Results for the Paper “An efficient approach for treating
composition-dependent diffusion within organic particles”,
<a href="https://github.com/simonom/Dcorr" target="_blank">https://github.com/simonom/Dcorr</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>Price et al.(2015)</label><mixed-citation>
Price, C., Mattsson, J., Zhang, Y., Bertram, A., Davies, J., Grayson, J., ,
Martin, S., O'Sullivan, D., Reid, J., Rickards, A., and Murray, B.: Water
diffusion in atmospherically relevant <i>α</i>-pinene secondary organic
material, Chem. Sci., 6, 4876–4883, <a href="https://doi.org/10.1039/C5SC00685F" target="_blank">https://doi.org/10.1039/C5SC00685F</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>Saukko et al.(2012)</label><mixed-citation>
Saukko, E., Lambe, A., Massoli, P., Koop, T., Wright, J., Croasdale, D.,
Pedernera, D., Onasch, T., Laaksonen, A., Davidovits, P., Worsnop, D., and
Virtanen, A.: Humidity-dependent phase state of SOA particles
from biogenic and anthropogenic precursors, Atmos. Chem. Phys., 12,
7517–7529, <a href="https://doi.org/10.5194/acp-12-7517-2012" target="_blank">https://doi.org/10.5194/acp-12-7517-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>Sehmel(1980)</label><mixed-citation>
Sehmel, G.: Particle and gas dry deposition: a review, Atmos. Environ., 14,
983–1011, <a href="https://doi.org/10.1016/0004-6981(80)90031-1" target="_blank">https://doi.org/10.1016/0004-6981(80)90031-1</a>, 1980.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>Sellegri et al.(2005)</label><mixed-citation>
Sellegri, K., Hanke, M., Umann, B., Arnold, F., and Kulmala, M.: Measurements
of organic gases during aerosol formation events in the boreal forest
atmosphere during QUEST, Atmos. Chem. Phys., 5, 373–384,
<a href="https://doi.org/10.5194/acp-5-373-2005" target="_blank">https://doi.org/10.5194/acp-5-373-2005</a>, 2005.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>Shiraiwa et al.(2012)</label><mixed-citation>
Shiraiwa, M., Pfrang, C., Koop, T., and Pöschl, U.: Kinetic multi-layer
model of gas-particle interactions in aerosols and clouds (KM-GAP): linking
condensation, evaporation and chemical reactions of organics, oxidants and
water, Atmos. Chem. Phys., 12, 2777–2794,
<a href="https://doi.org/10.5194/acp-12-2777-2012" target="_blank">https://doi.org/10.5194/acp-12-2777-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>Smith et al.(2003)</label><mixed-citation>
Smith, G., Woods, E., Baer, T., and Miller, R.: Aerosol uptake described by
numerical solution of the diffusion-reaction equations in the particle, J.
Phys. Chem. A, 107, 9582–9587, <a href="https://doi.org/10.1021/jp021843a" target="_blank">https://doi.org/10.1021/jp021843a</a>, 2003.
</mixed-citation></ref-html>
<ref-html id="bib1.bib23"><label>Starr et al.(1999)</label><mixed-citation>
Starr, F., Sciortino, F., and Stanley, H.: Dynamics of simulated water under
pressure, Phys. Rev. E, 60, 6757–6768, <a href="https://doi.org/10.1103/PhysRevE.60.6757" target="_blank">https://doi.org/10.1103/PhysRevE.60.6757</a>, 1999.
</mixed-citation></ref-html>
<ref-html id="bib1.bib24"><label>Steimer et al.(2015)</label><mixed-citation>
Steimer, S. S., Krieger, U. K., Te, Y.-F., Lienhard, D. M., Huisman, A. J.,
Luo, B. P., Ammann, M., and Peter, T.: Electrodynamic balance measurements of
thermodynamic, kinetic, and optical aerosol properties inaccessible to bulk
methods, Atmos. Meas. Tech., 8, 2397–2408,
<a href="https://doi.org/10.5194/amt-8-2397-2015" target="_blank">https://doi.org/10.5194/amt-8-2397-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib25"><label>Taylor and Krishna(1993)</label><mixed-citation>
Taylor, R. and Krishna, R.: Multicomponent Mass Transfer, John Wiley and
Sons, Inc., New York, 1993.
</mixed-citation></ref-html>
<ref-html id="bib1.bib26"><label>Topping et al.(2011)</label><mixed-citation>
Topping, D. O., Barley, M. H., and McFiggans, G.: The sensitivity of
Secondary Organic Aerosol component partitioning to the predictions of
component properties – Part 2: Determination of particle hygroscopicity and
its dependence on “apparent” volatility, Atmos. Chem. Phys., 11,
7767–7779, <a href="https://doi.org/10.5194/acp-11-7767-2011" target="_blank">https://doi.org/10.5194/acp-11-7767-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib27"><label>Topping et al.(2013)</label><mixed-citation>
Topping, D., Barley, M., and McFiggans, G.: Including phase separation in a
unified model to calculate partitioning of vapours to mixed inorganic-organic
aerosol particles, Faraday Discuss., 165, 273–288, <a href="https://doi.org/10.1039/C3FD00047H" target="_blank">https://doi.org/10.1039/C3FD00047H</a>,
2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib28"><label>Tröstl et al.(2016)</label><mixed-citation>
Tröstl, J., Chuang, W., Gordon, H., Heinritzi, M., Yan, C., Molteni, U.,
Ahlm, L., Frege, C., Bianchi, F., Wagner, R., Simon, M., Lehtipalo, K.,
Williamson, C., Craven, J., Duplissy, J., Adamov, A., Almeida, J.,
Bernhammer, A.-K., Breitenlechner, M., Brilke, S., Dias, A., Ehrhart, S.,
Flagan, R., Franchin, A., Fuchs, C., Guida, R., Gysel, M., Hansel, A., Hoyle,
C., Jokinen, T., Junninen, H., Kangasluoma, J., Keskinen, H., Kim, J., Krapf,
M., Kürten, A., Laaksonen, A., Lawler, M., Leiminger, M., Mathot, S.,
Möhler, O., Nieminen, T., Onnela, A., Petäjä, T., Piel, F.,
Miettinen, P., Rissanen, M., Rondo, L., Sarnela, N., Schobesberger, S.,
Sengupta, K., Sipilä, M., Smith, J., Steiner, G., Tomé, A., Virtanen,
A., Wagner, A., Weingartner, E., Wimmer, D., Winkler, P., Ye, P., Carslaw,
K., Curtius, J., Dommen, J., Kirkby, J., Kulmala, M., Riipinen, I., Worsnop,
D., Donahue, N., and Baltensperger, U.: The role of low-volatility organic
compounds for initial particle growth in the atmosphere, Nature, 506,
527–531, <a href="https://doi.org/10.1038/nature18271" target="_blank">https://doi.org/10.1038/nature18271</a>, 2016.

</mixed-citation></ref-html>
<ref-html id="bib1.bib29"><label>Vaden et al.(2011)</label><mixed-citation>
Vaden, T., Imre, D., Beránek, J., Shrivastava, M., and Zelenyuk, A.:
Evaporation kinetics and phase of laboratory and ambient secondary organic
aerosol, P. Natl. Acad. Sci. USA, 108, 2190–2195,
<a href="https://doi.org/10.1073/pnas.1013391108" target="_blank">https://doi.org/10.1073/pnas.1013391108</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib30"><label>Vignes(1966)</label><mixed-citation>
Vignes, A.: Diffusion in binary solutions, Ind. Eng. Chem. Fund., 5,
189–199,
<a href="https://doi.org/10.1021/i160018a007" target="_blank">https://doi.org/10.1021/i160018a007</a>, 1966.
</mixed-citation></ref-html>
<ref-html id="bib1.bib31"><label>Virtanen et al.(2010)</label><mixed-citation>
Virtanen, A., Joutsensaari, J., Koop, T., Kannosto, J., Yli-Pirilä, P.,
Leskinen, J., Mäkelä, J., Holopainen, J., Pöschl, U., Kulmala,
M., Worsnop, D., and Laaksonen, A.: An amorphous solid state of biogenic
secondary organic aerosol particles, Nature, 467, 824–827,
<a href="https://doi.org/10.1038/nature09455" target="_blank">https://doi.org/10.1038/nature09455</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib32"><label>Whitehead et al.(2012)</label><mixed-citation>
Whitehead, J., Dorsey, J., Gallagher, M., Flynn, M., McFiggans, G., and
Carpenter, L.: Particle fluxes and condensational uptake over sea ice during
COBRA, J. Geophys. Res., 117, D15202,
<a href="https://doi.org/10.1029/2012JD017798" target="_blank">https://doi.org/10.1029/2012JD017798</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib33"><label>Zaveri et al.(2008)</label><mixed-citation>
Zaveri, R., Easter, R., Fast, J., and Peters, L.: Model for
Simulating Aerosol Interactions and
Chemistry (MOSAIC), J. Geophys. Res., 113, D13204,
<a href="https://doi.org/10.1029/2007JD008782" target="_blank">https://doi.org/10.1029/2007JD008782</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib34"><label>Zaveri et al.(2014)</label><mixed-citation>
Zaveri, R. A., Easter, R. C., Shilling, J. E., and Seinfeld, J. H.: Modeling
kinetic partitioning of secondary organic aerosol and size distribution
dynamics: representing effects of volatility, phase state, and particle-phase
reaction, Atmos. Chem. Phys., 14, 5153–5181,
<a href="https://doi.org/10.5194/acp-14-5153-2014" target="_blank">https://doi.org/10.5194/acp-14-5153-2014</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib35"><label>Ziemann and Atkinson(2012)</label><mixed-citation>
Ziemann, P. and Atkinson, R.: Kinetics, products, and mechanisms of secondary
organic aerosol formation, Chem. Soc. Rev., 41, 6582–6605,
<a href="https://doi.org/10.1039/c2cs35122f" target="_blank">https://doi.org/10.1039/c2cs35122f</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib36"><label>Zobrist et al.(2008)</label><mixed-citation>
Zobrist, B., Marcolli, C., Pedernera, D. A., and Koop, T.: Do atmospheric
aerosols form glasses?, Atmos. Chem. Phys., 8, 5221–5244,
<a href="https://doi.org/10.5194/acp-8-5221-2008" target="_blank">https://doi.org/10.5194/acp-8-5221-2008</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib37"><label>Zobrist et al.(2011)</label><mixed-citation>
Zobrist, B., Soonsin, V., Luo, B., Krieger, U., Marcolli, C., Peter, T., and
Koop, T.: Ultra-slow water diffusion in aqueous sucrose glasses, Phys. Chem.
Chem. Phys., 13, 3514–3526, <a href="https://doi.org/10.1039/c0cp01273d" target="_blank">https://doi.org/10.1039/c0cp01273d</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib38"><label>Zuend et al.(2008)</label><mixed-citation>
Zuend, A., Marcolli, C., Luo, B. P., and Peter, T.: A thermodynamic model of
mixed organic-inorganic aerosols to predict activity coefficients, Atmos.
Chem. Phys., 8, 4559–4593, <a href="https://doi.org/10.5194/acp-8-4559-2008" target="_blank">https://doi.org/10.5194/acp-8-4559-2008</a>, 2008.
</mixed-citation></ref-html>--></article>
