<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" dtd-version="3.0">
  <front>
    <journal-meta>
<journal-id journal-id-type="publisher">ACP</journal-id>
<journal-title-group>
<journal-title>Atmospheric Chemistry and Physics</journal-title>
<abbrev-journal-title abbrev-type="publisher">ACP</abbrev-journal-title>
<abbrev-journal-title abbrev-type="nlm-ta">Atmos. Chem. Phys.</abbrev-journal-title>
</journal-title-group>
<issn pub-type="epub">1680-7324</issn>
<publisher><publisher-name>Copernicus GmbH</publisher-name>
<publisher-loc>Göttingen, Germany</publisher-loc>
</publisher>
</journal-meta>

    <article-meta>
      <article-id pub-id-type="doi">10.5194/acp-15-8539-2015</article-id><title-group><article-title>Using SEVIRI fire observations to drive smoke plumes in the CMAQ
air quality model: a case study over Antalya in 2008</article-title>
      </title-group><?xmltex \runningtitle{Fire plume simulation with geostationary observations}?><?xmltex \runningauthor{G.~Baldassarre et~al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>Baldassarre</surname><given-names>G.</given-names></name>
          <email>gi.baldassarre@gmail.com</email>
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Pozzoli</surname><given-names>L.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0003-0485-9624</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Schmidt</surname><given-names>C. C.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Unal</surname><given-names>A.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Kindap</surname><given-names>T.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Menzel</surname><given-names>W. P.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Whitburn</surname><given-names>S.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0003-3279-8152</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Coheur</surname><given-names>P.-F.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff4">
          <name><surname>Kavgaci</surname><given-names>A.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff5 aff6 aff7">
          <name><surname>Kaiser</surname><given-names>J. W.</given-names></name>
          
        </contrib>
        <aff id="aff1"><label>1</label><institution>Eurasia Institute of Earth Sciences, Istanbul Technical University, Istanbul, Turkey</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>Cooperative Institute for Meteorological Satellite Studies, University of Wisconsin, Madison, WI, USA</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>Spectroscopie de l'Atmosphère, Service de Chimie Quantique et de Photophysique, Université Libre de Bruxelles (U.L.B), Brussels, Belgium</institution>
        </aff>
        <aff id="aff4"><label>4</label><institution>Southwest Anatolia Forest Research Institute, Antalya, Turkey</institution>
        </aff>
        <aff id="aff5"><label>5</label><institution>King's College, London, UK</institution>
        </aff>
        <aff id="aff6"><label>6</label><institution>European Center for Medium-Range Weather Forecasts, Reading, UK</institution>
        </aff>
        <aff id="aff7"><label>7</label><institution>Max Planck Institute for Chemistry, Mainz, Germany</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">G. Baldassarre (gi.baldassarre@gmail.com)</corresp></author-notes><pub-date><day>30</day><month>July</month><year>2015</year></pub-date>
      
      <volume>15</volume>
      <issue>14</issue>
      <fpage>8539</fpage><lpage>8558</lpage>
      <history>
        <date date-type="received"><day>2</day><month>October</month><year>2014</year></date>
           <date date-type="rev-request"><day>6</day><month>January</month><year>2015</year></date>
           <date date-type="rev-recd"><day>15</day><month>June</month><year>2015</year></date>
           <date date-type="accepted"><day>13</day><month>July</month><year>2015</year></date>
      </history>
      <permissions>
<license license-type="open-access">
<license-p>This work is licensed under a Creative Commons Attribution 3.0 Unported License. To view a copy of this license, visit <ext-link ext-link-type="uri" xlink:href="http://creativecommons.org/licenses/by/3.0/">http://creativecommons.org/licenses/by/3.0/</ext-link></license-p>
</license>
</permissions><self-uri xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015.html">This article is available from https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015.html</self-uri>
<self-uri xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015.pdf">The full text article is available as a PDF file from https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015.pdf</self-uri>


      <abstract>
    <p>Among the atmospheric emission sources, wildfires are episodic events
characterized by large spatial and temporal variability. Therefore, accurate
information on gaseous and aerosol emissions from fires for specific regions and
seasons is critical for air quality forecasts. The Spinning Enhanced Visible and Infrared Imager (SEVIRI) in geostationary orbit provides fire
observations over Africa and the Mediterranean with a temporal
resolution of 15 min. It thus resolves the complete fire life cycle and
captures the fires' peak intensities,
which is not possible in Moderate Resolution Imaging Spectroradiometer (MODIS)
fire emission inventories like the Global Fire Assimilation System (GFAS).
We evaluate two different operational
fire radiative power (FRP) products derived from SEVIRI, by studying
a large forest fire in Antalya, Turkey, in July–August 2008. The EUMETSAT
Land Surface Analysis Satellite Applications Facility (LSA SAF) has higher FRP values during the fire episode than the
Wildfire Automated Biomass Burning Algorithm (WF_ABBA). It is also in better agreement with the co-located, gridded
MODIS FRP. Both products miss small fires that frequently occur in the region
and are detected by MODIS. Emissions are derived from the FRP products. They
are used along-side GFAS emissions in smoke plume simulations with the Weather
Research and Forecasting (WRF) model and
the Community Multiscale Air Quality (CMAQ) model. In comparisons with MODIS aerosol optical thickness (AOT)
and Infrared Atmospheric Sounding Interferometer (IASI), CO and NH<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:math></inline-formula> observations
show that including the diurnal
variability of fire emissions improves the spatial distribution and peak
concentrations of the simulated smoke plumes associated with this large fire.
They also show a large discrepancy between the currently available
operational FRP products, with the LSA SAF being the most appropriate.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p>Fire is the main cause of forest destruction in countries of the Mediterranean basin
(<xref ref-type="bibr" rid="bib1.bibx25" id="altparen.1"/>), where the fire season starts in April and can last until the end of November.
In terms of emissions, the biomass-burning contribution to <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> was comparable with the
anthropogenic contribution during recent years (e.g., <xref ref-type="bibr" rid="bib1.bibx57" id="altparen.2"/>).</p>
      <p>Emissions from open-vegetation burnings are increasingly recognized as an
important parameter in atmospheric modeling, and their accurate description
is important for specific regions and seasons as well as for specific
episodes. Recent studies have demonstrated that open biomass-burning events,
although episodic, may have important effects on the photochemistry in the
eastern Mediterranean <?xmltex \hack{\mbox\bgroup}?><xref ref-type="bibr" rid="bib1.bibx43" id="paren.3"/><?xmltex \hack{\egroup}?>. Furthermore, the impact of biomass
burning is expected to become more important in the southeastern
Mediterranean according to future scenarios on climate change
<xref ref-type="bibr" rid="bib1.bibx60 bib1.bibx38" id="paren.4"/>.</p>
      <p>Continuous improvements of air quality models, such as the Community Multiscale Air Quality (CMAQ) model,
permit simulation of the chemical composition of the atmosphere at fine spatial and temporal resolutions.
Therefore, emission inventories must also be provided with a higher level of detail, and this is
particularly important for forest fires, which are characterized by high spatial and temporal variations.
According to <xref ref-type="bibr" rid="bib1.bibx13" id="text.5"/>, in addition to adequate estimates of emitted mass,
successfully modeling the impact of fires on air quality depends on an accurate
spatiotemporal allocation of emissions.</p>
      <p>Satellite remote sensing provides powerful means of locating and characterizing open-vegetation burnings.
Infrared fire detection from satellites takes advantage of the fact that as target temperature increases
radiance increases faster at the shortwave end of the spectrum when compared to the long-wave end.
By using two atmospheric window spectral channels, such as the 3.9 and 11 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>, fire locations
and characteristics can be determined. Since the cost of continuous monitoring of fires by ground
and aircraft observations is prohibitive, monitoring with satellite observations offers a
cost-effective alternative with broader coverage, especially in remote areas.
While limited to cloud-free scenes, satellite observations can still provide a better understanding
of fire issues.</p>
      <p>Although designed for operational weather forecasting and not specifically for fire detection,
the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on board the Meteosat Second Generation (MSG) geostationary satellites shows great potential for fire detection and
characterization. Since this instrument is employed on a geostationary platform, it can sample
a large region with high temporal frequency (one observation per 15 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">min</mml:mi></mml:math></inline-formula>).
Under certain conditions (no opaque clouds, solar reflection, etc.)
SEVIRI delivers important information on the temporal variability of active fires.</p>
      <p>It has been demonstrated in small-scale experiments that the amount of radiant energy liberated
per unit time during a vegetation fire, the so-called fire radiative power (FRP),
is related to the rate at which the biomass fuel is being consumed.
Spaceborne sensors that are able to observe the middle infrared (MIR) spectral radiance around 3.9 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> emanating from
the Earth can measure the radiative component of the energy released by open
fires <xref ref-type="bibr" rid="bib1.bibx65" id="paren.6"/>. The estimate of biomass-burning emissions from
FRP avoids using the complex parameters of fuel loading and burned area.
Thus, it is a robust approach for the global estimates of biomass-burning
emissions (e.g., <xref ref-type="bibr" rid="bib1.bibx21 bib1.bibx16 bib1.bibx67" id="altparen.7"/>).</p>
      <p>FRP has been successfully used to calculate biomass combusted from
wildfires in Africa using measurements made by the SEVIRI on Meteosat-8
<xref ref-type="bibr" rid="bib1.bibx50" id="paren.8"/> and Moderate Resolution Imaging Spectroradiometer (MODIS) <xref ref-type="bibr" rid="bib1.bibx11" id="paren.9"/>.
Global examples are also available <xref ref-type="bibr" rid="bib1.bibx28 bib1.bibx7" id="paren.10"/>.</p>
      <p>Different satellite techniques have been developed using high temporal
resolution multi-spectral data in order to detect and characterize fire
activity. The Wildfire Automated Biomass Burning Algorithm (WF_ABBA) and the
EUMETSAT Land Surface Analysis Satellite Applications Facility (LSA SAF) fire radiative power provide operational fire radiative
power products based on SEVIRI observations using different algorithms.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1" specific-use="star"><caption><p><bold>(a)</bold> Study area. <bold>(c)</bold> Burned area as reported by the Antalya forestry department (right) and over a MODIS Blue Marble image (left).
<bold>(b)</bold> WF_ABBA (MSG-SEVIRI) detections of the Antalya fire. <bold>(d)</bold> LSA SAF (MSG-SEVIRI) detections of the Antalya fire.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f01.png"/>

      </fig>

      <p>In 2008 most of the large forest damage in Europe occurred in
the southeastern Mediterranean countries, which were under the
influence of extreme weather conditions conductive to fire
ignition and spread.
The country most heavily damaged was Turkey, where the forest fire
danger was high during the period of May to October, and the period of July
to September was especially active due to very high temperatures,
very low humidity and effective winds.
In Turkey, the coastline, which starts from
Hatay and extends over the Mediterranean and Aegean up to Istanbul,
has the highest fire risk. Approximately 60 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">%</mml:mi></mml:math></inline-formula>
(12 million ha) of Turkey's forest area is located in this
fire sensitive area <xref ref-type="bibr" rid="bib1.bibx26" id="paren.11"/>.</p>
      <p>A large forest fire occurred on 31 July 2008 in Antalya,
Turkey's most touristic province (Fig. <xref ref-type="fig" rid="Ch1.F1"/>). It burned for 5 consecutive days and
affected 15 795 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">ha</mml:mi></mml:math></inline-formula> of forestland mainly dominated by Turkish red pine
(<italic>Pinus brutia</italic> Ten.), a typical fire adapted species  of eastern
Mediterranean basin ecosystems <xref ref-type="bibr" rid="bib1.bibx30" id="paren.12"/>. In this fire, many
homes and farming buildings were destroyed. During the fire suppression
efforts, 227 technical personal, 1680 fire fighters, 75 forest workers, 20 local
managers, 1450 villagers and 80 gendarmes were employed. In those efforts, 197
fire suppression trucks with sprinklers, 45 bulldozers, 38 trailers, 5 road
graders, 63 pickups, 9 helicopters and 7 planes were occupied.</p>
      <p>In this paper, we investigate the applicability of the SEVIRI-based
FRP products for air quality simulations with the CMAQ model, and compare to simulations based on the daily fire
emissions derived from MODIS.</p>
      <p>We calculate gridded FRP and emission inventories for a large region of the
eastern Mediterranean during the life time of the Antalya fire using two
operational SEVIRI FRP products. They are compared to the daily emission
inventory based on MODIS at different spatial resolutions, <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mn>0.5</mml:mn><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mn>0.5</mml:mn><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> (Global Fire Assimilation System – GFASv1.0), and <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> (GFASv1.1). All four emission inventories are
used as input in the CMAQ model.
The simulated smoke plumes are then validated by comparison with the
aerosol optical thickness (AOT) determinations from MODIS and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> retrievals from Infrared Atmospheric Sounding Interferometer (IASI),
which were previously used to
track the emission and transport of pollution and to measure reactive trace
species in biomass-burning plumes during the intense 2007 Greek forest fires
<xref ref-type="bibr" rid="bib1.bibx61 bib1.bibx6" id="paren.13"/>.</p>
</sec>
<sec id="Ch1.S2">
  <title>Methods</title>
<sec id="Ch1.S2.SS1">
  <title>SEVIRI fire radiative power</title>
      <p>FRP is a measure of the radiant energy liberated per
unit time from burning vegetation via the rapid oxidation of fuel carbon and
hydrogen. <xref ref-type="bibr" rid="bib1.bibx65" id="text.14"/> approximated FRP as the difference of the
MIR spectral radiances between a fire pixel and ambient
background pixels in a linear form. An alternative method uses the Dozier
approximation of the instantaneous fire area and temperature
<xref ref-type="bibr" rid="bib1.bibx9" id="paren.15"/> to evaluate the FRP over the detected fire pixel by
using thermal and middle infrared satellite observations.</p>
      <p>Following the Wooster approach, the LSA SAF algorithm uses the SEVIRI band
centered at 3.94 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> infrared window to evaluate the FRP associated
with the detected fire pixels, while the WF_ABBA uses a combination of
both methods, depending on the availability of instantaneous area and
temperature estimation over the detected fire pixel.</p>
      <p>At the sub-satellite point, the field of view of the SEVIRI thermal
channels is about 4.8 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> with an overlap of 1.6 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>. The
consequence of the overlap is that radiance coming from a single location is
at times present in several neighboring pixels. Although this may not
significantly impact other applications, it is very important in the case of
fire detection, since fires present complex geometric structures that make it
difficult to identify the affected pixels <xref ref-type="bibr" rid="bib1.bibx2" id="paren.16"/>. Also, the
background temperature that is used in the FRP calculation is derived from
neighboring pixels.</p>
      <p>The 4 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> channel of the SEVIRI sensor has a saturation temperature
of 335 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">K</mml:mi></mml:math></inline-formula>. Saturation of the SEVIRI pixels will not impact on the
ability of the fire algorithms to detect fires, but it will lead to an
underestimation of the true fire radiative power for large fires, which can
contribute significantly to an underestimation of FRP.</p>
      <p>The fire products described in this paper are derived using SEVIRI level 1.5
radiometrically calibrated and geometrically corrected imagery
provided by the EUMETSAT LSA SAF. Resampling and regridding included
in level 1.5 can act to mask the fire signal and impact both fire detection
and characterization.</p>
      <p>Previous studies have demonstrated that SEVIRI data can be used operationally
to assist the detection of fires by improving the reliability in fire
announcements <xref ref-type="bibr" rid="bib1.bibx34 bib1.bibx59" id="paren.17"/> and enabling real-time fire front monitoring in southern Europe. The role of SEVIRI is
especially useful as the fires increase in number and size <xref ref-type="bibr" rid="bib1.bibx55" id="paren.18"/>.</p>
</sec>
<sec id="Ch1.S2.SS2">
  <title>Fire characterization data</title>
      <p>WF_ABBA is a dynamic contextual
algorithm developed at the Cooperative Institute for Meteorological Satellite Studies (CIMSS) at the University of Wisconsin-Madison using multi-spectral Geostationary Operational Environmental Satellite (GOES) data to monitor
biomass burning in the Western Hemisphere <xref ref-type="bibr" rid="bib1.bibx45 bib1.bibx46 bib1.bibx44" id="paren.19"/>.
Recently a global version of the WF_ABBA (Version 6.5) has been applied to MSG-SEVIRI data.
The global geostationary WF_ABBA Version 6.5.006 includes the following:
<list list-type="bullet"><list-item>
      <p><italic>fire mask indicating where fire detection is not possible</italic>: opaque cloud coverage; block-out zones due to solar reflectance, clouds, extreme view angles, biome type, bad data,
etc.;</p></list-item><list-item>
      <p><italic>revised ASCII fire product output</italic>: latitude; longitude; satellite
view angle; pixel size; observed 4 and 11 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> brightness
temperatures; instantaneous estimates of fire size, temperature and FRP;
biome type; fire confidence flag.</p></list-item></list>
The Meteosat fire radiative power-pixel (FRP-pixel) product is derived at the
Eumetsat LSA SAF
(<uri>http://landsaf.meteo.pt/</uri>) at 15 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">min</mml:mi></mml:math></inline-formula> intervals using Meteosat
SEVIRI observations. In this paper we often refer to this product only as LSA
SAF (instead of using its full name LSA SAF FRP-pixel) in order to make its
comparative analysis with other satellite products easier to read; in fact,
just like the homologous WF_ABBA, the FRP is one type of information
delivered by this product. The product is created using an operational
version of the prototype geostationary active fire detection and
characterization algorithm presented in <xref ref-type="bibr" rid="bib1.bibx49" id="text.20"/>. Most uses
of the FRP-pixel product have so far been focused on Africa (e.g., <xref ref-type="bibr" rid="bib1.bibx51" id="altparen.21"/>),
but the product also provides information on fires burning across
Europe and parts of South America. The FRP-pixel product is freely
available in near-real time or from the archive of the LSA SAF,
and <xref ref-type="bibr" rid="bib1.bibx66" id="text.22"/> and <xref ref-type="bibr" rid="bib1.bibx52" id="text.23"/>
fully described the operational
version of the product, its content and use.
For each processed region, the FRP-pixel algorithm generates two output files.
<list list-type="bullet"><list-item>
      <p><italic>FRP quality flag</italic>: this file provides the actual status of each pixel
in the selected region, whether it contains a detected fire or not, and
a number of other conditions such as whether the pixel is cloudy or in clear
sky, coastline, etc. <xref ref-type="bibr" rid="bib1.bibx35" id="paren.24"/>.</p></list-item><list-item>
      <p><italic>FRP list</italic>: one entry for every fire
pixel that has an estimated FRP value. For each fire pixel, the FRP and an
exhaustive list of relevant information such as the fire pixel background
window mean temperature is also provided.</p></list-item></list>
Due to the higher spatial resolution and wide usage of the
MODIS active fire products,
these are taken to be the reference standard against which the SEVIRI FRP
product is assessed.</p>
      <p>The Global Fire Assimilation System version 1.1 calculates
biomass-burning emissions by assimilating FRP observations
from the MODIS instruments onboard the Terra and Aqua satellites.
It provides daily emissions on a global <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> grid.</p>
      <p>The comparison of SEVIRI FRP to GFAS emissions should be regarded as
a comparison between two independent data sets rather than a validation using
a reference data set <xref ref-type="bibr" rid="bib1.bibx54" id="paren.25"/>.</p>
</sec>
<sec id="Ch1.S2.SS3">
  <title>Emission inventory</title>
<sec id="Ch1.S2.SS3.SSS1">
  <?xmltex \opttitle{WF\_ABBA--LSA~SAF gridding at 0.1 regular grid}?><title>WF_ABBA–LSA SAF gridding at 0.1 regular grid</title>
      <p>In order to create a fire emission inventory at the same grid of GFASv1.1, we
started from WF_ABBA and LSA SAF FRP-pixel products and generated a gridded
FRP product at <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mn>0.1</mml:mn><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula> resolution
containing area integrated FRP totals corrected for partial cloudiness at the
grid cell scale.</p>
      <p>The gridding method is described in <xref ref-type="bibr" rid="bib1.bibx14" id="text.26"/>. The FRP
derived from the SEVIRI image (LSA SAF and WF_ABBA) acquired at time t are
summed over a regular grid of resolution G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>
grid box. For each grid point (<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>X</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>Y</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>), the total
FRP is

                  <disp-formula id="Ch1.E1" content-type="numbered"><mml:math display="block"><mml:mrow><?xmltex \hack{\hbox\bgroup\fontsize{9.5}{9.5}\selectfont$\displaystyle}?><mml:mtext mathvariant="normal">FRP</mml:mtext><mml:mo>(</mml:mo><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>i</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub><mml:mo>)</mml:mo><mml:mo>=</mml:mo><mml:mfrac><mml:mn mathvariant="normal">1</mml:mn><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">s</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>i</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:mfrac><mml:munder><mml:mo movablelimits="false">∑</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:msub><mml:mi>i</mml:mi><mml:mi>t</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi>t</mml:mi></mml:msub><mml:mo>)</mml:mo><mml:mo>∈</mml:mo><mml:msup><mml:mi mathvariant="normal">G</mml:mi><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mi mathvariant="normal">G</mml:mi><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:munder><mml:mtext>FRP</mml:mtext><mml:mo>(</mml:mo><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>i</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:mo>)</mml:mo><mml:mo>,</mml:mo><?xmltex \hack{$\egroup}?></mml:mrow></mml:math></disp-formula>

            where <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">s</mml:mi></mml:msub><mml:mo>(</mml:mo><mml:mi>t</mml:mi><mml:mo>,</mml:mo><mml:msub><mml:mi>i</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi mathvariant="normal">G</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) is the fraction of
clear-sky pixels<fn id="Ch1.Footn1"><p>We used the WF_ABBA fire mask and LSA SAF quality
flag products to have information about the status of each processed pixel in
the selected region (block-out zones due to solar reflectance, clouds,
extreme view angles, biome type, bad data, etc.).</p></fn> over land within the
G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> grid box. When <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">s</mml:mi></mml:msub><mml:mo>&lt;</mml:mo><mml:mn>0.2</mml:mn></mml:mrow></mml:math></inline-formula> the
equation is not estimated. (<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>i</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi>f</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) <inline-formula><mml:math display="inline"><mml:mo>∈</mml:mo></mml:math></inline-formula>
G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> means that the center of SEVIRI pixel
(<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>i</mml:mi><mml:mi>f</mml:mi></mml:msub><mml:mo>,</mml:mo><mml:msub><mml:mi>j</mml:mi><mml:mi>f</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) is inside the new grid G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> G<inline-formula><mml:math display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>.
We average the gridded FRP over 1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">h</mml:mi></mml:math></inline-formula> time period. As
a consequence, the SEVIRI-based fire emission inventories will have hourly
time resolution, in contrast with MODIS, and reveal diurnal
patterns.</p>
</sec>
<sec id="Ch1.S2.SS3.SSS2">
  <?xmltex \opttitle{ Emission factors for WF\_ABBA and LSA~SAF}?><title> Emission factors for WF_ABBA and LSA SAF</title>
      <p>The GFAS emission inventory represents our reference information on biomass-burning activity over the eastern Mediterranean domain. In order to make our
SEVIRI FRP-based fire emission inventory comparable with this data set we
followed a similar procedure as described in <xref ref-type="bibr" rid="bib1.bibx29" id="text.27"/>, then we can evaluate
emission rates of main biomass-burning pollutants calculated from WF_ABBA
and LSA SAF FRP-pixel fire characterization data. This approach also helps to
investigate differences between the three biomass-burning emission
inventories over the case study area and over the Antalya fire itself.</p>
      <p>The hourly FRP gridded product was converted to major
contaminant emission rate using conversion factors to dry matter combustion
rate and emission factors based on an updated version of the compilation by <xref ref-type="bibr" rid="bib1.bibx1" id="text.28"/>.</p>
      <p>Using satellite retrievals and top–down estimates of particulate matter,
<xref ref-type="bibr" rid="bib1.bibx29" id="text.29"/> concluded that emissions of particulate matter calculated
with this method need to be boosted to reproduce the global distribution of
organic matter and black carbon. Thus, in this work, we used the
proposed aerosol enhancement factor of 3.4.</p>
      <p>An alternative approach to estimate biomass-burning smoke aerosols is to
directly relate them to FRP, using smoke emission coefficients
[<inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">MJ</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>] proposed by <xref ref-type="bibr" rid="bib1.bibx21" id="text.30"/>. Specifically, the values
we assign to the main land cover types are 0.06 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">MJ</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for
savannah and tropical forest, 0.084 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">MJ</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for agriculture and
0.02 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">MJ</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for extra tropical forest. Table <xref ref-type="table" rid="Ch1.T1"/> shows
a significant difference between smoke aerosol emissions evaluated with this
approach and with the one described in <xref ref-type="bibr" rid="bib1.bibx29" id="text.31"/> already boosted by
the aerosol enhancement factor. We use the approach of <xref ref-type="bibr" rid="bib1.bibx29" id="text.32"/>
in this work to simulate the atmospheric composition of
Antalya fire with the CMAQ air quality model.</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1"><caption><p>Total particulate matter estimates [tons] in the study area and for Antalya
fire from WF_ABBA and LSA SAF FRP-pixel products during Antalya fire
lifetime (31 July and 5 August 2008), using conversion factors and emission
coefficients described in <xref ref-type="bibr" rid="bib1.bibx29" id="text.33"/> (referring to
<xref ref-type="bibr" rid="bib1.bibx1" id="altparen.34"/>) boosted by 3.4 and <xref ref-type="bibr" rid="bib1.bibx21" id="text.35"/> smoke emission coefficients. The
estimates based on <xref ref-type="bibr" rid="bib1.bibx21" id="text.36"/> are set in italics below the ones
referring to <xref ref-type="bibr" rid="bib1.bibx1" id="text.37"/>. </p></caption><oasis:table frame="topbot"><oasis:tgroup cols="3">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">Turkey</oasis:entry>  
         <oasis:entry colname="col3">Antalya fire</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">WF_ABBA</oasis:entry>  
         <oasis:entry colname="col2">29 411.9</oasis:entry>  
         <oasis:entry colname="col3">3967.1</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>158 894.5</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>10 559.1</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">LSA SAF</oasis:entry>  
         <oasis:entry colname="col2">48 090.6</oasis:entry>  
         <oasis:entry colname="col3">18 992.3</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>199 287.6</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>50 551.8</italic></oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

</sec>
<sec id="Ch1.S2.SS3.SSS3">
  <title> Vertical distribution</title>
      <p>Vertical distribution of fire emission is critical for air quality simulation
in presence of energetic wild fire episodes as the plume top height can strongly
exceed the daily maximum of the boundary layer height. Below this height, fast
turbulent mixing rapidly redistributes the emissions through out the boundary layer.</p>
      <p>The emissions calculated for each hour were vertically distributed within all
layers in proportion to their thickness compared to plume height,
determined by using a semi-empirical formula suggested by <xref ref-type="bibr" rid="bib1.bibx58" id="text.38"/>.</p>
      <p>This methodology is based on three input parameters:
boundary layer height, Brunt–Väisälä frequency in
the free troposphere and fire radiative power. The first two parameters are
derived by the meteorological conditions evaluated at each fire using
output from the WRF meteorological simulation, and the 15 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">min</mml:mi></mml:math></inline-formula> resolution FRP
in the Sofiev formula means that a correct estimation of the diurnal cycle of
the fire, crucial for a correct vertical allocation of the fire emissions, will be incorporated.</p>
</sec>
</sec>
<sec id="Ch1.S2.SS4">
  <title>Meteorological and air quality modeling</title>
      <p>A series of model simulations were performed to reproduce the chemical
composition of the atmosphere during the selected episode using the  Advanced Research Weather
Research and Forecasting model (WRF-ARW v3.3; <xref ref-type="bibr" rid="bib1.bibx56" id="altparen.39"/>;
<uri>http://wrfmodel.org/</uri>)
and the CMAQ model (CMAQv4.7.1; <xref ref-type="bibr" rid="bib1.bibx12" id="altparen.40"/>).
The WRF-ARW model is widely used and its ability to reproduce the
meteorological conditions,
including the region of interest (the eastern Mediterranean basin)
has been proven in previous studies (e.g.,  <xref ref-type="bibr" rid="bib1.bibx22 bib1.bibx23" id="altparen.41"/>).
The operational temperature, wind, humidity and pressure fields retrieved from
the European Center for Medium-Range Weather Forecasting (ECMWF) model with
<inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mn>0.25</mml:mn><mml:mo>∘</mml:mo></mml:msup><mml:mo>×</mml:mo><mml:msup><mml:mn>0.25</mml:mn><mml:mo>∘</mml:mo></mml:msup></mml:mrow></mml:math></inline-formula>
lat–long horizontal resolution and 6-hourly temporal resolution were used to
constrain the WRF meteorological simulation through nudging, initial and
boundary conditions.
The following physical options in the WRF meteorological simulations were
used: WSM3 microphysics scheme <xref ref-type="bibr" rid="bib1.bibx19" id="paren.42"/>,
RRTM (rapid radiative transfer model) long-wave radiation scheme
<xref ref-type="bibr" rid="bib1.bibx39" id="paren.43"/>,
Dudhia shortwave radiation scheme <xref ref-type="bibr" rid="bib1.bibx10" id="paren.44"/>,
NOAH land surface model <xref ref-type="bibr" rid="bib1.bibx3" id="paren.45"/>, Yonsei University
planetary boundary layer (PBL) scheme <xref ref-type="bibr" rid="bib1.bibx18" id="paren.46"/>
and Kain–Fritsch cumulus parameterization scheme <xref ref-type="bibr" rid="bib1.bibx27" id="paren.47"/>.</p>
      <p>CMAQ is a regional air quality model widely used to simulate the atmospheric
composition of the atmosphere <xref ref-type="bibr" rid="bib1.bibx17 bib1.bibx62 bib1.bibx32 bib1.bibx41 bib1.bibx22 bib1.bibx23" id="paren.48"/>.
The Meteorology–Chemistry Interface Processor (MCIPv3.6, <xref ref-type="bibr" rid="bib1.bibx42" id="altparen.49"/>) was used
to process the WRF meteorological output for the CMAQ simulations. The Carbon Bond-V
(CB05) chemical mechanism <xref ref-type="bibr" rid="bib1.bibx68" id="paren.50"/> and the AERO5 module <xref ref-type="bibr" rid="bib1.bibx12" id="paren.51"/>
were used for the gas-phase chemistry and aerosol and aqueous chemistry, respectively.</p>
      <p>The WRF-CMAQ model simulations were performed for two nested domains.
The coarse domain has a resolution of <inline-formula><mml:math display="inline"><mml:mrow><mml:mn>30</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">km</mml:mi><mml:mo>×</mml:mo><mml:mn>30</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">km</mml:mi></mml:mrow></mml:math></inline-formula>
(<inline-formula><mml:math display="inline"><mml:mrow><mml:mn>192</mml:mn><mml:mo>×</mml:mo><mml:mn>160</mml:mn></mml:mrow></mml:math></inline-formula> cells) and covers all of Europe. The fine domain has
the resolution of <inline-formula><mml:math display="inline"><mml:mrow><mml:mn>10</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">km</mml:mi><mml:mo>×</mml:mo><mml:mn>10</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">km</mml:mi></mml:mrow></mml:math></inline-formula> (<inline-formula><mml:math display="inline"><mml:mrow><mml:mn>186</mml:mn><mml:mo>×</mml:mo><mml:mn>156</mml:mn></mml:mrow></mml:math></inline-formula> cells),
centered in the Marmara Sea region including southern Turkey (see Fig. S1
in the Supplement), where the fire episode occurred close to
Antalya; 24 vertical layers, from surface to about 26 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>,
are used for both domains; the layer thickness increases from surface to the top,
and the first eight levels have a spacing of <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>100</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. The initial
chemical concentrations and boundary conditions for the coarse domain were
provided from the Monitoring Atmospheric Composition and Climate (MACC) data
service, which provide a comprehensive reanalysis of atmospheric composition
for the period 2003–2010 (<uri>http://gmes-atmosphere.eu/</uri>; <xref ref-type="bibr" rid="bib1.bibx24" id="altparen.52"/>),
while the output of the coarse domain was used to create initial concentrations and
boundary conditions for the nested domain.</p>
      <p>The Netherlands Organization for Applied Scientific Research (TNO)/MACC_2005 emission inventory <xref ref-type="bibr" rid="bib1.bibx8" id="paren.53"/> was used for
anthropogenic sources of  the main gaseous and aerosol atmospheric pollutants
(<inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NO</mml:mi><mml:mi mathvariant="normal">x</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">SO</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, NMVOC, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and PMcoarse). The emissions
from vegetation, biogenic volatile organic compounds (BVOC; e.g., isoprene and
terpenes) were estimated using the Model of Emissions of Gases and Aerosols
from Nature (MEGAN; <xref ref-type="bibr" rid="bib1.bibx15" id="altparen.54"/>) according to the simulated
temperature and radiation fields from the meteorological model. Sea salt
aerosol emissions are calculated online by CMAQ model as a function of wind
speed <xref ref-type="bibr" rid="bib1.bibx31" id="paren.55"/>. Mineral dust emissions were not included in this
study; nevertheless during the studied episode dust outbreaks from North
Africa and Arabian Peninsula were not forecasted over the Mediterranean Sea and southern Turkey
(not shown; BSC-DREAM8b v1.0;
<uri>http://www.bsc.es/earth-sciences/mineral-dust/catalogo-datos-dust</uri>);
therefore, the impact of mineral dust on PM concentrations can be neglected.</p>
      <p>Different emission inventories were used and created to describe the Antalya wildfire episode,
and used in the WRF-CMAQ simulation.</p>
      <p>The air quality simulations are first performed without fire emission
information on both reference domains. The GFAS1.0 inventory
<xref ref-type="bibr" rid="bib1.bibx29" id="paren.56"/> is used to provide biomass-burning emission
information over the coarse domain (covering all Europe). The WRF/CMAQ
simulations at <inline-formula><mml:math display="inline"><mml:mrow><mml:mn>30</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">km</mml:mi><mml:mo>×</mml:mo><mml:mn>30</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">km</mml:mi></mml:mrow></mml:math></inline-formula> are used to provide
boundary and initial conditions to the fine resolution simulations. For the
simulations at <inline-formula><mml:math display="inline"><mml:mrow><mml:mn>10</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">km</mml:mi><mml:mo>×</mml:mo><mml:mn>10</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">km</mml:mi></mml:mrow></mml:math></inline-formula> horizontal resolution,
the more refined GFAS1.1 emission inventory represents the reference
information on biomass-burning activity over the eastern Mediterranean
domain, which is compared with two newly developed high temporal resolution
emission inventories based on FRP derived by SEVIRI data with two different
algorithms, WF_ABBA and LSA SAF.</p>
      <p>All the CMAQ simulations consider only black carbon (BC) and organic carbon (OC)
<xref ref-type="bibr" rid="bib1.bibx40" id="paren.57"/> for the smoke aerosol emissions.
The total organic matter (OM) emitted is calculated by scaling
OC emissions by a factor of 1.5.</p>
</sec>
<sec id="Ch1.S2.SS5">
  <title>Satellite observations</title>
<sec id="Ch1.S2.SS5.SSS1">
  <title>MODIS aerosol optical thickness</title>
      <p>As a source of information on the aerosol content in the atmosphere over
the area affected by the Antalya fire at the beginning of August 2008, we used the MODIS Aerosol Product.
This satellite product reproduces the ambient AOT over the oceans
globally and over a portion of the continents <xref ref-type="bibr" rid="bib1.bibx48 bib1.bibx36" id="altparen.58"/>.</p>
      <p>The MODIS instrument has near-daily global coverage with a swath width of 2330 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>.</p>
      <p>We collect MODIS AQUA level 2 aerosol products, collection 5.1 (MOD04, LAADS Web-NASA).
This product provides AOT data at 0.55 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> with a spatial resolution of 10 <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">km</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula>.</p>
      <p>The MODIS data often contain large areas of missing values, especially during the fires,
due to the presence of clouds, the presence of fire plumes in clouds and misclassification of
fire plumes as clouds <xref ref-type="bibr" rid="bib1.bibx67" id="paren.59"/>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2" specific-use="star"><caption><p><bold>(a)</bold> Daily average FRP (MW) over the Antalya fire. <bold>(b)</bold> Total
fire radiative power (FRP) detected over the eastern Mediterranean and over the
Antalya fire between 30 July 2008 and 6 August 2008. The data are derived
from the WF_ABBA and LSA SAF. Open black squares indicate the FRP
observed over the area of the Antalya fire at a lower temporal resolution by
the two MODIS instruments.</p></caption>
            <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f02.png"/>

          </fig>

</sec>
<sec id="Ch1.S2.SS5.SSS2">
  <?xmltex \opttitle{{$\chem{CO}$} and {$\chem{NH_{{3}}}$} from IASI}?><title><inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> from IASI</title>
      <p>The IASI, the first of a series of three,
is a passive remote sensing instrument operating in nadir mode circling in a polar
sun-synchronous orbit on board the MetOp-A (Meteorological Operational) satellite.
IASI provides a twice-daily global coverage of the Earth surface (9:30
and 21:30 LT) with a relatively small footprint on the ground (circular pixel with 12 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>
diameter at nadir) <xref ref-type="bibr" rid="bib1.bibx6" id="paren.60"/>. Its large and continuous spectral coverage
of the infrared region (645–2760 <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">cm</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>), combined with a medium spectral
resolution (0.5 <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">cm</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> apodized) and a low instrumental noise
(<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>0.2</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">K</mml:mi></mml:math></inline-formula> at 950 <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">cm</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and 280 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">K</mml:mi></mml:math></inline-formula>) <xref ref-type="bibr" rid="bib1.bibx5" id="paren.61"/>,
allow the atmospheric concentrations of a variety of atmospheric constituents to be measured
<xref ref-type="bibr" rid="bib1.bibx6 bib1.bibx4" id="paren.62"/>, including carbon monoxide and  ammonia,
both emitted in large amounts by vegetation fires.</p>
      <p>Total columns of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> are from the FORLI (Fast-Optimal Estimation Retrievals on Layers for IASI)
near real-time retrieval software <xref ref-type="bibr" rid="bib1.bibx20" id="paren.63"/>. The retrieval is based on the
optimal estimation method (OEM) described by <xref ref-type="bibr" rid="bib1.bibx53" id="text.64"/>. It minimizes, by iteratively
updating a state vector (set of unknown parameters), the difference between an observed and
a simulated spectrum, using constrains defined by an a priori profile
(averaged value expected, <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>x</mml:mi><mml:mi mathvariant="normal">a</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) and its variability
(covariance matrix <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="bold">S</mml:mi><mml:mi mathvariant="normal">a</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>), which represent our best knowledge of the
system <xref ref-type="bibr" rid="bib1.bibx61" id="paren.65"/>.</p>
      <p>Total column <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> is retrieved from IASI using the algorithm of <xref ref-type="bibr" rid="bib1.bibx63" id="text.66"/>,
which is built on the detection method described by <xref ref-type="bibr" rid="bib1.bibx64" id="text.67"/>. The retrieval scheme
includes two steps. First a so-called hyperspectral range index (HRI) is calculated
from each spectrum measured by IASI. The HRI is then converted into a <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total
column using look-up tables of HRI  built from simulated spectra under various
atmospheric conditions.</p>
      <p>The daily average total column for <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> has been calculated using the weighted averaging
method as follows <xref ref-type="bibr" rid="bib1.bibx63" id="paren.68"/>:

                  <disp-formula id="Ch1.E2" content-type="numbered"><mml:math display="block"><mml:mrow><mml:mspace linebreak="nobreak" width="0.33em"/><mml:mover accent="true"><mml:mi>X</mml:mi><mml:mo mathvariant="normal">‾</mml:mo></mml:mover><mml:mo>=</mml:mo><mml:mfrac><mml:mrow><mml:mo>∑</mml:mo><mml:msub><mml:mi mathvariant="italic">ω</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:msub><mml:mi>x</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow><mml:mrow><mml:mo>∑</mml:mo><mml:msub><mml:mi mathvariant="italic">ω</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:mfrac><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

            where <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="italic">ω</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:msup><mml:mi mathvariant="italic">σ</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mi mathvariant="italic">σ</mml:mi></mml:math></inline-formula> is the relative error on the
retrieved column.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S3">
  <title>Results: wildfire emission inventories</title>
<sec id="Ch1.S3.SS1">
  <title>What SEVIRI sees</title>
      <p>SEVIRI captured biomass-burning activities in the province of Antalya from their beginning,
as confirmed by ground reported observations, in the early afternoon of the 31 July and
monitored the entire lifetime of the fire till the end on 5 August 2008.</p>
      <p>The Antalya fire was an extreme event in terms of energy output.
Figure <xref ref-type="fig" rid="Ch1.F2"/>a shows the spatiotemporal evolution of the biomass burning in
terms of daily average FRP as estimated by WF_ABBA and LSA SAF fire
algorithms using SEVIRI observations.</p>
      <p>In Fig. <xref ref-type="fig" rid="Ch1.F2"/>b the estimated FRPs, based on SEVIRI observations, over the
study area and over Antalya fire between 30 July and 6 August 2008, are
depicted. (The timescale for all the results is in local time (LT)
which is more easily linked to the diurnal cycle of the fires.) In the same
graph we can also see the FRP observed by MODIS over the Antalya fire.</p>
      <p>The graph reveals the pronounced diurnal fire cycle driven by day/night
differences in atmospheric humidity, temperature and wind. However, during
the second day of the Antalya fire, the nocturnal activity was also very
strong. We notice that the first part of the event (from 31 July to
3 August 2008) was particularly intense, reaching FRP values of
8000 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">MW</mml:mi></mml:math></inline-formula> (according to LSA SAF FRP-pixel product).</p>
      <p>The two SEVIRI-based FRP products depict the same fire
episode differently (Fig. <xref ref-type="fig" rid="Ch1.F2"/>). The WF_ABBA data produces lower
emission estimates than those generated from LSA SAF during the intense fire
period of 31 July to 1 August,
while both products are comparable when only smaller fires are present.
Differences between the two algorithms, particularly in their handling of pixel oversampling,
could explain why the difference is largest during peak burning.</p>
      <p>MODIS observations, when available, show greater consistency with the LSA SAF product.
But, due to its dependence on the scheduled day overpass of EOS AQUA and TERRA,
this instrument could not observe the two most intense moments of the fire activity,
both in the afternoon of 1 and 2 August 2008.</p>
      <p>The agreement between MODIS and LSA SAF suggests that the WF_ABBA is performing less well,
particularly considering that the WF_ABBA FRP consistently appears to be lower than LSA SAF FRP.
However, the WF_ABBA detections matched the fire perimeter more closely,
indicating it handles the diffraction due to the point spread function more effectively.
The apparently low FRP values from the WF_ABBA may reflect an issue with the algorithm,
including missed fire pixels that may have been screened out by overly aggressive cloud
screening for example, over counting by LSA SAF, or a combination of both.
An additional factor could be the difference in dynamic range between MODIS and SEVIRI
and how the WF_ABBA and LSA SAF handle saturated fire pixels.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p>TPM, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and NO<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mi>x</mml:mi></mml:msub></mml:math></inline-formula> emission rates observed over the eastern Mediterranean <bold>(a)</bold>
and over the Antalya fire <bold>(b)</bold> from 30 July to 6 August 2008. Cyan and blue lines are the hourly and daily WF_ABBA FRP. Grey and
black lines are the hourly and daily LSA SAF FRP-pixel. Green line is the GFASv1.1.</p></caption>
          <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f03.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4" specific-use="star"><caption><p><bold>(a)</bold> Temporal variation of FRP, plume injection height (Hp) and
TPM emission rate for a strong emitting fire pixel in the model
grid belonging to the Antalya fire on 1 August 2008. <bold>(b)</bold> Vertical
distribution of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> emission rate over the same pixel at
15:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> of the same day. The black-dashed line defines the PBL.</p></caption>
          <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f04.png"/>

        </fig>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T2"><caption><p>Total fire emission estimates of the principal pollutants [tons] in the study
area and for Antalya fire from WF_ABBA and LSA SAF FRP-pixel products and
GFASv1.1 during Antalya fire lifetime (31 July and 5 August 2008). The
GFASv1.1 values are italic below the value for WF_ABBA and LSA SAF FRP-pixel
(in bold) based ones. </p></caption><oasis:table frame="topbot"><oasis:tgroup cols="3">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1">Species</oasis:entry>  
         <oasis:entry colname="col2">Turkey</oasis:entry>  
         <oasis:entry colname="col3">Antalya fire</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">CO</oasis:entry>  
         <oasis:entry colname="col2">63 338.5</oasis:entry>  
         <oasis:entry colname="col3">8373.4</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>102 613.0</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>40 087.6</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>370 204.9</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>27 279.7</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">NMHC</oasis:entry>  
         <oasis:entry colname="col2">5710.3</oasis:entry>  
         <oasis:entry colname="col3">466.7</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>7645.7</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>2234.4</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>37 019.9</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>1513.1</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">NO<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mi mathvariant="normal">x</mml:mi></mml:msub></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">1782.7</oasis:entry>  
         <oasis:entry colname="col3">288.3</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>3181</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>1380.1</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>9721.4</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>942.4</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"><inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">18 817.5</oasis:entry>  
         <oasis:entry colname="col3">2286.9</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>29 371.4</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>10 948.5</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>111 233.7</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>7448.2</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">OC</oasis:entry>  
         <oasis:entry colname="col2">10 394.2</oasis:entry>  
         <oasis:entry colname="col3">1493.5</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>17 507.1</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>7150</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>58 115.2</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>4846.2</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">BC</oasis:entry>  
         <oasis:entry colname="col2">1193.8</oasis:entry>  
         <oasis:entry colname="col3">214.7</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>2250.6</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>1027.8</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>6267</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>697.5</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">SO<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">300.3</oasis:entry>  
         <oasis:entry colname="col3">50.8</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>548.4</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>243.2</bold></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>1586.6</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>163.2</italic></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">NH<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col2">1045.6</oasis:entry>  
         <oasis:entry colname="col3">243.2</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><bold>1612.1</bold></oasis:entry>  
         <oasis:entry colname="col3"><bold>591.5</bold></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"><italic>6211.3</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>326.6</italic></oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

</sec>
<sec id="Ch1.S3.SS2">
  <title>Magnitude of fire emissions over the eastern Mediterranean basin and over the Antalya fire</title>
      <p>The hourly and daily average total particulate matter (TPM) emission rates,
integrated over the study area and over the Antalya fire, from 30 July to
6 August 2008, are presented in Fig. <xref ref-type="fig" rid="Ch1.F3"/>. They are plotted together with the
GFASv1.1 (in green) over the same areas and time period.</p>
      <p>For the entire region, GFASv1.1 emission estimation is significantly higher
than the SEVIRI-based WF_ABBA and LSA SAF FRP-pixel products.
For the Antalya fire area, the comparison is closer; the LSA SAF FRP-pixel-based emission estimations are the highest (Fig. <xref ref-type="fig" rid="Ch1.F3"/>b and Table <xref ref-type="table" rid="Ch1.T2"/>).</p>
      <p>Differences between GFASv1.1 and SEVIRI-based (WF_ABBA and LSA SAF)
fire-induced emissions estimates, when they are integrated over the study
area, are mainly due to the presence of agricultural waste burning, common
this time of the year in eastern Europe. In fact, the coarse spatial resolution
of SEVIRI results in numerous low intensity fires<fn id="Ch1.Footn2"><p>Minimum FRPs
returned by the fire detection algorithm when applied to real SEVIRI Level
1.5 data are on the order of <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>40</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">MW</mml:mi></mml:math></inline-formula> (and at extreme <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>20</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">MW</mml:mi></mml:math></inline-formula>) at the sub-satellite point. For MODIS, the minimum FRP
detection threshold for reliably detected fire pixels is <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn mathvariant="normal">7</mml:mn></mml:mrow></mml:math></inline-formula>–10 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">MW</mml:mi></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx54" id="paren.69"/>.</p></fn> being undetected.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5" specific-use="star"><caption><p>Horizontal allocation of the Antalya fire emitting pixels during 1 August 2008 as
derived by GFASv1.1 <bold>(a)</bold>, LSA SAF <bold>(b)</bold> and WF_ABBA <bold>(c)</bold> FRP-based fire emission inventories. Black line is the ground reported
burned area (on the upper-right corner of this picture, 03:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> of
2 August means 24:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">UTC</mml:mi></mml:math></inline-formula> of 1 August).</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f05.png"/>

        </fig>

      <p>On the other hand, the impact of coarse spatial resolution is balanced by the
very high temporal resolution of the geostationary observations. Thus, SEVIRI
captures the complete Antalya fire life cycle which the much higher spatial
resolution MODIS instruments on EOS Aqua and Terra are unable to describe with
their 4 times per day overpasses.</p>
      <p>The large differences in daily values found in Fig. <xref ref-type="fig" rid="Ch1.F3"/> are also seen
in Fig. S2, in the Supplement. This figure shows a large presence
of low energy fire pixels (daily FRP <inline-formula><mml:math display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 20 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">MW</mml:mi></mml:math></inline-formula>) over eastern Europe depicted
by GFASv1.1 during 1 August 2008 (daily FRP integrated over the entire
region, excluding the Antalya fire, <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>14.4</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">GW</mml:mi></mml:math></inline-formula>). During the same day, the
WF_ABBA and LSA SAF describe a reduced fire activities
(daily FRP integrated over the entire region, excluding the Antalya fire,
<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>3.4</mml:mn></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn>2.4</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">GW</mml:mi></mml:math></inline-formula>, respectively), especially in eastern Europe
where the SEVIRI spatial resolution is larger (due to scan angle effects).</p>
      <p>On the other hand, if we reduce our study area only to the region surrounding
the Antalya fire, the LSA SAF estimates a daily FRP more than double (6.6 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">GW</mml:mi></mml:math></inline-formula>)
that of the GFASv1.1 (2.9 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">GW</mml:mi></mml:math></inline-formula>); GFASv1.1 only used 4 MODIS observations over
the area affected by the fire, despite the 96 available from SEVIRI which
captured the peak of the burning.</p>
</sec>
<sec id="Ch1.S3.SS3">
  <title>Temporal and spatial allocation of the fire emissions</title>
      <p>A recent study by <xref ref-type="bibr" rid="bib1.bibx13" id="text.70"/> has shown that, in addition to adequate
estimates of emitted mass, horizontal and vertical distributions of emissions
in gridded domains and their timing are key inputs to successfully model the impacts
of fires on air quality. According to the same study the largest potential gains
related to depiction of fire-related emissions lie in better characterizing their
temporal distribution. The same analysis demonstrated that the fire emission
allocated to each hour produces a response at downwind receptors lasting 2–3 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">h</mml:mi></mml:math></inline-formula>,
concluding that better approximation of the timing and progression of fire-related
emissions is a viable approach to improve model performance.</p>
      <p>Figure <xref ref-type="fig" rid="Ch1.F4"/>a shows the hourly variation of FRP, plume injection height
(Hp) (as defined by the Sofiev formula) and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> emission rates on 1 August 2008,
for a strong fire pixel in the model grid, belonging to
the Antalya fire, as estimated by the three different fire emission
inventories.</p>
      <p>Looking at this figure, we can appreciate the more accurate temporal
allocation of the fire emission achieved by using SEVIRI FRP data. Both
SEVIRI-based algorithms describe peak emissions at 04:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula>, and
around 14:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula>, a secondary maximum around 07:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> for
WF_ABBA and 09:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> for LSA SAF, and much less intense fire activity
after 18:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula>.</p>
      <p>The vertical allocation of the <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> emission rate for the same
fire pixel at 15:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> is shown in Fig. <xref ref-type="fig" rid="Ch1.F4"/>b.
Refinement in the emission inventory, achieved by using the improved temporal
resolution of the SEVIRI FRP data, leads to a different vertical allocation.
In fact, the FRP is one of the parameters used to evaluate the hourly vertical
distribution of the fire emissions.
For example, according to the LSA SAF fire characterization, at
15:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula> of 1 August on the fire
pixel selected in Fig. <xref ref-type="fig" rid="Ch1.F4"/>, the fire activity became very strong and
ejected a large quantity of particulate
matters above the PBL. We notice from
Fig. <xref ref-type="fig" rid="Ch1.F4"/>a that the GFAS hourly injection height is not constant during the
day. In fact, even if the pixel-based GFAS FRP does not change in a daily
time frame, the other parameters used to calculate this information in the Sofiev
formula are driven by meteorological conditions that are changing hourly.</p>
      <p>Previous studies have shown that vertical mixing of fire emission within
the PBL is rapid, while correctly determining plume penetration into the
free atmosphere is critical <xref ref-type="bibr" rid="bib1.bibx13 bib1.bibx33" id="paren.71"/>.</p>
      <p>Figure <xref ref-type="fig" rid="Ch1.F5"/> shows the horizontal allocation of the TPM fire emission
at the beginning, middle and end of the most intense day of the Antalya fire.</p>
      <p>In the presence of large wildfires, the horizontal allocation of the emissions also
becomes critical, because these fires can travel over a vast area and affect
different pixels within the model domain during the same day. In fact, as we can
see from SEVIRI-based TPM emission rate in  Fig. <xref ref-type="fig" rid="Ch1.F5"/>b and c during
1 August, the Antalya fire moved from the northwest border of the ground
reports of the burned area to the southeast (see also  Fig. <xref ref-type="fig" rid="Ch1.F2"/>a),
emitting aerosols at different emission rates in the pixels of the model grid
affected by the burning during the day.
This level of description of the horizontal allocations of the fire emission
cannot be achieved with the daily GFASv1.1 (Fig. <xref ref-type="fig" rid="Ch1.F5"/>a).</p>
      <p><xref ref-type="bibr" rid="bib1.bibx13" id="text.72"/> demonstrated that model performance could benefit from more
accurately positioning emissions. In fact the responsiveness of simulated
fire pollutant concentrations to small variations in the horizontal allocation
of fire emissions also reflects a strong influence from meteorological inputs.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6" specific-use="star"><caption><p><bold>(a)</bold> MODIS (true color composite from visible wavelengths) over the
eastern Mediterranean basin on 1 August 2008 at 14:30 LT. <bold>(b)</bold> Concurrent MODIS level 2 aerosol optical thickness. Concurrent CMAQ-simulated changes in AOT due to fires made by using GFAS1.0 <bold>(c)</bold>,
GFAS1.1 <bold>(d)</bold>, LSA SAF-based <bold>(e)</bold> and WF_ABBA-based <bold>(f)</bold>
fire emission inventories. The changes in the AOT are calculated by subtracting
concentrations from simulations without fires. The white-dashed line connects the
cells of the model grid having the maximum-simulated AOT along the Antalya
fire plume. MODIS AOT color scale is the same as the one for the simulated
changes in AOT.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f06.png"/>

        </fig>

</sec>
</sec>
<sec id="Ch1.S4">
  <title>Results: air quality model simulations </title>
<sec id="Ch1.S4.SS1">
  <title>Smoke plume simulations</title>
      <p>During the most intense period of the Antalya fire,
winds over the study area were mostly southerly and they transported
the smoke from the fires to the Mediterranean Sea.
Figure <xref ref-type="fig" rid="Ch1.F6"/> shows the smoke plume on 1 August 2008 at 14:30 LT from the Antalya
fire in MODIS visible imagery (Fig. <xref ref-type="fig" rid="Ch1.F6"/>a) and in the MODIS level 2 aerosol
optical thickness product (Fig. <xref ref-type="fig" rid="Ch1.F6"/>b).
We note that the MODIS AOT data contain large areas of missing
values (see also Fig. S3a in the Supplement), probably due to
misclassification of fire plumes as clouds. In fact, these retrievals are
obtained by aggregating information from 1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> pixels (see <xref ref-type="bibr" rid="bib1.bibx36" id="altparen.73"/>).
Probably, in this case, the AOD algorithm labels the pixels with the
strongest smoke aerosol concentration (right below the bay of Antalya)
as clouds and performs the AOD retrieval in the rest of the pixels,
which are clean, resulting in a missing description of the first part
of the Antalya fire plume.</p>
      <p>In order to directly compare with the MODIS AOT, the model-simulated aerosol species
(mostly PM<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn>2.5</mml:mn></mml:msub></mml:math></inline-formula>) mass concentrations are converted to AOT values. The latter has been
calculated from model output according to  <xref ref-type="bibr" rid="bib1.bibx37" id="text.74"/>, where aerosol extinction
depends on aerosol mass, scattering coefficients for different aerosol components,
and an adjustment factor for relative humidity light scattering.</p>
      <p>The simulated changes in AOT due to the smoke plume dispersion
based on hourly estimates are shown in Fig. <xref ref-type="fig" rid="Ch1.F6"/>c for GFAS1.0,
Fig. <xref ref-type="fig" rid="Ch1.F6"/>d for GFAS1.1, Fig. <xref ref-type="fig" rid="Ch1.F6"/>e for LSA SAF and Fig. <xref ref-type="fig" rid="Ch1.F6"/>f for
WF_ABBA. (Animations covering 31 July to 2 August 2008 are available in the
Supplement.)
The changes in the AOT due to the fires are estimated by subtracting the AOT
simulated without including the biomass-burning emission inventory.
The simulations performed with the four different fire emission inventories
reproduce the observed plume features: an intense plume downwind of the fire,
above the bay of Antalya, that broadens in the southern direction. But only the
LSA SAF FRP-pixel-based emission inventory causes the plume to reach the southern
west coast of Cyprus, as it does in the MODIS observations.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7" specific-use="star"><caption><p>On 1 August 2008 at 15:00 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">LT</mml:mi></mml:math></inline-formula>, vertical cross section, across the
concurrent maximum-simulated AOT, showing the changes in the <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>
concentration across the main plume of Antalya fire for the CMAQ simulations
performed with GFAS1.0 <bold>(a)</bold>, GFAS1.1 <bold>(b)</bold>, LSA SAF <bold>(c)</bold> and WF_ABBA-based <bold>(d)</bold> fire emission inventories. The
changes in the <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> concentration are calculated by subtracting concentrations
from simulations without fires. The black-dashed line defines the PBL.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f07.png"/>

        </fig>

      <?xmltex \floatpos{p}?><fig id="Ch1.F8" specific-use="star"><caption><p>On 31 July 2008 at 20:00 LT, 31 July 2008 at 23:00 LT, 1 August 2008 at 03:00 LT,
1 August 2008 at
06:00 LT and 1 August 2008 at 10:00 LT.
CMAQ-simulated changes in AOT and vertical distribution of fire <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>
concentration along the maximum-simulated AOT due to fires using
GFAS1.0- <bold>(a)</bold>, GFAS1.1- <bold>(b)</bold>, LSA SAF- <bold>(c)</bold> and WF_ABBA-based <bold>(d)</bold> fire emission inventories. The
changes in the AOT are calculated by subtracting concentrations from simulations without fires.
The white-dashed line, in the AOT map, connects the cells of the model grid having the maximum-simulated AOD along the Antalya fire plume.
Black-dashed line, in the vertical cross sections, defines the PBL.</p></caption>
          <?xmltex \igopts{width=\textwidth}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f08.png"/>

        </fig>

      <?xmltex \floatpos{p}?><fig id="Ch1.F9" specific-use="star"><caption><p><bold>(a)</bold> Instantaneous MODIS AOT retrievals over the eastern Mediterranean basin
from 30 July to 6 August 2008. Concurred CMAQ-simulated AOT using
GFAS1.0- <bold>(b)</bold>, GFAS1.1- <bold>(c)</bold>, LSA SAF- <bold>(d)</bold> and WF_ABBA-based <bold>(e)</bold> fire emission inventories.
Pearson's R coefficients between MODIS observed and CMAQ-simulated AOT are given below.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f09.png"/>

        </fig>

      <p>Figure <xref ref-type="fig" rid="Ch1.F7"/> shows the vertical cross sections of the simulated
changes in <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> concentrations due to the different
fire emission inventories, along with the maximum-simulated AOT
(white-dashed lines in  Fig. <xref ref-type="fig" rid="Ch1.F6"/>c–f).</p>
      <p>Very high <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> concentrations (around 200 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">µ</mml:mi><mml:mi mathvariant="normal">g</mml:mi></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>) above the PBL (black-dashed
line in Fig. <xref ref-type="fig" rid="Ch1.F7"/>) are observed for the CMAQ simulation with the LSA SAF
(Fig. <xref ref-type="fig" rid="Ch1.F7"/>c), while lower concentration are simulated with GFAS1.0,
GFAS1.1 and WF_ABBA (Fig. <xref ref-type="fig" rid="Ch1.F7"/>a, b and d, respectively). This is
a combined result of different emission magnitude, timing and injection
height estimated by the four emission inventories.</p>
      <p>In the presence of a large biomass-burning event, the vertical allocation of the
fire emissions is an important parameter that can strongly determine the
correct description of the spatiotemporal evolution of the fire plume. In
fact, in this case the top plume height can strongly exceed the daily maximum
of the boundary layer height and catch a completely different atmospheric
dynamic.</p>
      <p>During the first 2 days of the Antalya fire, only the LSA SAF FRP allows for strong
concentrations of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> above 2000 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> and it is the only one who depicted a cluster
of aerosol moving toward southwest Cyprus, as confirmed by MODIS observations in
Fig. <xref ref-type="fig" rid="Ch1.F8"/>. Probably, the higher vertical allocation of the emission estimated by
LSA SAF FRP allows a part of the fire aerosols to catch a different
wind dynamic in the upper atmospheric layers that leads them to southeast as
observed a few hours later in the MODIS observations (see also the animations
in the Supplement).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F10" specific-use="star"><caption><p><bold>(a)</bold> Temporal variations of modeled and observed AOT
from 30 July to 6 August 2008 averaged over the area of study and
<bold>(b)</bold> linear regression and associated Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficients
between modeled and observed AOT averaged over the same period
and area. Five different simulations have been performed using various emission scenarios:
CMAQ (GFAS1.0), CMAQ (GFAS1.1), CMAQ (LSA SAF), CMAQ (WF_ABBA) and CMAQ (wo-fires) (without
fires).</p></caption>
          <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f10.png"/>

        </fig>

      <?xmltex \floatpos{p}?><fig id="Ch1.F11" specific-use="star"><caption><p>Daily AM and PM CO total column (molec <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">cm</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>) from top to
bottom, using IASI, CMAQ(GFAS1.1), CMAQ(LSA SAF) and CMAQ(WF_ABBA)
between 31 July 2008 and 3 August 2008 over the area of study. Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula>
coefficients between IASI <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and CMAQ <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> simulations are given below.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f11.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F12" specific-use="star"><caption><p><bold>(a)</bold> Temporal variations of modeled and observed <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> total columns
from 31 July to 3 August 2008 averaged over the area of study and
<bold>(b)</bold> linear regression and associated Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficients
between modeled and observed <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> total columns averaged over the same period
and area. <bold>(c)</bold> Tons of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> emitted by the Antalya fire over the study area,
as observed by IASI and simulated by CMAQ. The contribution of the Antalya fire on
the <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> observed and simulated has been evaluated by subtracting the
minimum value of the respective time series in the upper-left panel. Five
different simulations have been performed using various emission scenarios:
CMAQ (GFAS1.0), CMAQ (GFAS1.1), CMAQ (LSA SAF), CMAQ (WF_ABBA) and CMAQ (wo-fires) (without fires).</p></caption>
          <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f12.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F13"><caption><p>Temporal variations of modeled and observed <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total column
from 31 July to 3 August 2008 averaged over the area of study.
The averaged values are a mean of all measurements within the studied area,
weighted by the relative retrieval error of ammonia measurements following Eq. (<xref ref-type="disp-formula" rid="Ch1.E2"/>).</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://acp.copernicus.org/articles/15/8539/2015/acp-15-8539-2015-f13.png"/>

        </fig>

</sec>
<sec id="Ch1.S4.SS2">
  <title>Top–down information on AOT</title>
      <p>Previous studies have found that the bottom–up estimate of aerosols tends
to be underestimated by a factor of 3 due to uncertainties in input parameters
for the emissions algorithm <xref ref-type="bibr" rid="bib1.bibx47 bib1.bibx67" id="paren.75"/>.
In this study, we decided to boost our fire aerosol emission estimates
(based on WF_ABBA and LSA SAF FRP) by a factor of 3.4 as suggested by <xref ref-type="bibr" rid="bib1.bibx29" id="text.76"/>.</p>
      <p>For the comparison with MODIS AOD, we selected the retrieved and
simulated AOD data pairs from the same time and same location inside a
selected area that includes the fire plume originating from Antalya
(red-dashed box in Fig. <xref ref-type="fig" rid="Ch1.F9"/>).</p>
      <p>From Fig. <xref ref-type="fig" rid="Ch1.F9"/> we observe that point by point correlation is generally
higher when the fire plume is not present in the selected area (30 July and 6 August 2008). In fact, if the magnitude or the spatiotemporal
distribution of aerosol fire emission is poorly estimated, or if the transport
and dispersion of fire plumes are not well represented in the CMAQ, the predicted
fire plume at a certain  location and time may not agree with the one
observed by MODIS. For example, at 15:00 LT on 1 August, the largest AOD
values associated with the fire plume, according to MODIS-Aqua retrievals, are
located in the middle-left bottom part of the selected box, while the LSA SAF
simulation from CMAQ shows larger AOD values in the middle-right upper part of the red box.</p>
      <p>If we average MODIS and CMAQ data pairs over the selected red-dashed box,
we can have an estimate of the performances of the different fire emission
inventories in predicting the magnitude of the emitted smoke aerosols.
In Fig. <xref ref-type="fig" rid="Ch1.F10"/> we present the temporal series of the average AOT over the Antalya
fire plume box, predicted by CMAQ and observed by MODIS from 30 July to 6 August 2008,
and the corresponding correlations. In Figs. <xref ref-type="fig" rid="Ch1.F9"/> and <xref ref-type="fig" rid="Ch1.F10"/> we excluded
MODIS observations with large areas of missing values inside the box surrounding the
fire plume (the complete temporal series of the MODIS AOT from 30 July to 6 August 2008 is described Fig. S3 in the Supplement).</p>
      <p>It is interesting that GFAS1.0 simulation shows the largest correlation coefficient (0.72)
even if the intensity and shape of the plume are not well represented, while the LSA SAF
simulation shows the closest values in terms of AOT and plume shape, but only a correlation
of 0.46. This is mainly due to the observed MODIS AOD on the 4 August showing large
AOT values east of Cyprus, which are captured 1 day in advance by the model
simulations and, may indicate a problem in the model reproducing the plume transport
in the last days of the fire.</p>
      <p>By removing 4 August from the temporal series, we observe that the GFAS 1.0 and
LSA SAF simulations are the more highly correlated with MODIS
(Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficient 0.79 and 0.77, respectively). Also better correlation is
observed with the GFAS1.1 and WF_ABBA FRP-based emission inventory (Pearson's
<inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula>
coefficient 0.69 and 0.6, respectively).</p>
</sec>
<sec id="Ch1.S4.SS3">
  <?xmltex \opttitle{Top--down information on total columns of {$\chem{CO}$} and {$\chem{NH_{{3}}}$}}?><title>Top–down information on total columns of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></title>
      <p>We compared the CMAQ-simulated <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total columns with IASI
measurements. We considered for this purpose only simulated vertical columns at the same
time and location as the IASI measurements inside a selected area that
includes the fire plume originating from Antalya (red-dashed box in
Fig. <xref ref-type="fig" rid="Ch1.F10"/>).</p>
      <p>There is a good correlation between modeled and observed
IASI <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> total column averaged over the selected area for the LSA SAF
(Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficient 0.81) and the GFAS1.1 (Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficients
0.57) simulations (Fig. <xref ref-type="fig" rid="Ch1.F11"/>). No correlation is observed between
the WF_ABBA simulation and the observations (Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficient <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>-</mml:mo><mml:mn>0.08</mml:mn></mml:mrow></mml:math></inline-formula>); this
could be explained by the lower estimation of
the energy emitted by the Antalya fire (discussed in Sect. 3.1), which results
in lower emission estimations. This can be seen in Fig. <xref ref-type="fig" rid="Ch1.F11"/>a, where
<inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula>
total columns from the CMAQ (WF_ABBA) simulation are close to those without
fires. Generally, the CMAQ simulations seem to underestimate the <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> total
columns except for the LSA SAF at high concentrations (Fig. <xref ref-type="fig" rid="Ch1.F11"/>).</p>
      <p>A positive correlation is found between each individual <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula>
IASI observation and the coincident CO modeled with the CMAQ
simulation with the three different fire scenarios (Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula>
coefficients ranging from 0.38 to 0.91), except for 31 July  PM data
(Pearson's <inline-formula><mml:math display="inline"><mml:mi>R</mml:mi></mml:math></inline-formula> coefficients ranging from 0.15 to 0.23) (see Fig. <xref ref-type="fig" rid="Ch1.F11"/>).
This implies that the CMAQ model provides a relatively accurate representation
of the temporal pattern of the emission and transport in comparison to IASI.</p>
      <p>IASI <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total column observations have a large relative error
(<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≥</mml:mo><mml:mn>100</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">%</mml:mi></mml:math></inline-formula>) for most of the measurements. This is due to
relatively small <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total columns and low thermal contrasts
above the sea <xref ref-type="bibr" rid="bib1.bibx63" id="paren.77"/>, where most of the
fire plume is located. Nevertheless, we observe a good correspondence
between temporal variations of modeled and measured <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> total columns
averaged over the study area with average values of the same order
of magnitude (Fig. <xref ref-type="fig" rid="Ch1.F12"/>), reaching <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>≈</mml:mo><mml:mn mathvariant="normal">2</mml:mn><mml:mo>×</mml:mo><mml:msup><mml:mn>10</mml:mn><mml:mn>16</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> molecules <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="normal">cm</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>
by IASI on 2 August AM.</p>
</sec>
</sec>
<sec id="Ch1.S5" sec-type="conclusions">
  <title>Summary and conclusions</title>
      <p>We explored the use of WF_ABBA and LSA SAF (MSG-SEVIRI-based) FRP products
to describe biomass-burning emissions of principal pollutants over the
eastern Mediterranean during a strong wild fire event that occurred in southern
Turkey in August 2008. We analyzed the estimates comparing them with the
MODIS-based GFASv1.1 (Fig. <xref ref-type="fig" rid="Ch1.F3"/> and Table <xref ref-type="table" rid="Ch1.T2"/>).</p>
      <p>The SEVIRI-based fire emission estimates are comparable with those from the GFASv1.1
when they describe the Antalya fire; for example, 2.3 and 10.9 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">Gg</mml:mi></mml:math></inline-formula> of
<inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and 8.4 and 40.1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">Gg</mml:mi></mml:math></inline-formula> of <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> are estimated for the entire
Antalya episode from WF_ABBA and LSA SAF, while the GFASv1.1 based on MODIS
estimates are 7.4 and 27.3 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">Gg</mml:mi></mml:math></inline-formula> for <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula>, respectively.
However, WF_ABBA and LSA SAF tend to be quite lower when integrated over the
entire Eastern Mediterranean basin. The presence of low energetic agricultural burning
(common in Eastern Europe during summertime), undetected by SEVIRI because of
its coarse spatial resolution, is probably the main cause of this difference.</p>
      <p>Also the impact of the use of different conversion factors available in
literature illustrates the large uncertainties of currently available biomass-burning emission estimates (Table <xref ref-type="table" rid="Ch1.T1"/>).</p>
      <p>The analysis of the CMAQ-simulated aerosol and trace gas transport from the
Antalya fire shows the importance of a correct estimation of the emissions
not only in terms of their magnitude but also in terms of emission timing
and vertical distribution. The <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">PM</mml:mi><mml:mn>2.5</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> concentrations along the fire
plume (Figs. <xref ref-type="fig" rid="Ch1.F7"/> and <xref ref-type="fig" rid="Ch1.F8"/>) show that a better estimation of the
plume penetration above the PBL (in the simulation performed with the LSA SAF-based emission inventory) led to a more accurate description of its subsequent features
as confirmed by MODIS observations (Fig. <xref ref-type="fig" rid="Ch1.F6"/>).</p>
      <p>In comparison with IASI total column <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:mi mathvariant="normal">CO</mml:mi></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow class="chem"><mml:msub><mml:mi mathvariant="normal">NH</mml:mi><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, the simulations
performed using GFASv1.1 and LSA SAF FRP-pixel-based fire emission
inventories provide a more accurate representation of the temporal pattern of
emissions and transport, while that based on the WF_ABBA tends to underestimate
the concentration of these species along the simulated fire plume.</p>
      <p>The high correlation found between CMAQ simulation with LSA SAF-based
emissions and IASI measurements (Fig. <xref ref-type="fig" rid="Ch1.F12"/>) shows that this data set
provides the most accurate description of the emission emitted by Antalya
fire both in terms of their magnitude and in terms of their spatiotemporal
distribution.</p>
      <p>We conclude that SEVIRI observations can refine biomass-burning emissions,
which can subsequently be used in regional-scale air quality models like CMAQ
to improve the prediction of the chemical composition of the atmosphere
in the presence of large biomass-burning episodes.</p>
      <p>Higher spatial resolution observations from a future imager in geostationary
orbit would help to realize improved fire detection and characterization
products of low energetic fire activity that would help to fill the temporal gap
observed with available polar observations.</p>
</sec>

      
      </body>
    <back><app-group>
        <supplementary-material position="anchor"><p><bold>The Supplement related to this article is available online at <inline-supplementary-material xlink:href="http://dx.doi.org/10.5194/acp-15-8539-2015-supplement" xlink:title="zip">doi:10.5194/acp-15-8539-2015-supplement</inline-supplementary-material>.</bold></p></supplementary-material>
        </app-group><ack><title>Acknowledgements</title><p>This research was supported by the Turkish Science
Foundation via 111G037, “Development of Air Pollution Emissions Management System”.</p><p>The research in Belgium was funded by the F.R.S.-FNRS
and the Belgian State Federal Office for Scientific,
Technical and Cultural Affairs (prodex arrangement 4000111403).
S. Whitburn is grateful to the “Fonds pour la Formation á
la Recherche dans l'Industrie et dans l'Agriculture” for a PhD
grant (Boursier FRIA). P.-F. Coheur is Senior Research Associate with F.R.S.-FNRS.</p><p>We gratefully acknowledge support from the projects “Effects of
Climate Change on Air Pollution Impacts and Response Strategies
for European Ecosystems” (ECLAIRE) and “Monitoring of Atmospheric
Composition and Climate – Interim Implementation” (MACC-II),
funded under the EC 7th  Framework Programme
(grant agreement nos. 282910 and 283576, respectively),
as well as from the EUMETSAT SAF on Ozone and Atmospheric Chemistry Monitoring (O3MSAF).</p><p>We would like to thank Martin Wooster at Kings College London for
helping us to describe in a clear and articulate manner the Meteosat fire radiative power-pixel product. G. Baldassarre would like to thank Elaine M. Prins, Jason C. Brunner and Jay P. Hoffman, members of the biomass-burning
group at the Cooperative Institute for Meteorological Satellite Studies
(CIMSS), and Jean M. Phillips at the Space Science and Engineering Center
(SSEC) at the University of Wisconsin-Madison for their assistance, guidance
and support.<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?>
Edited by: V.-H. Peuch</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bibx1"><label>Andreae and Merlet(2001)</label><mixed-citation>Andreae, M. O. and Merlet, P.: Emission of trace gases and aerosols from
biomass burning, Global Biogeochem. Cy., 15, 955–966,
doi:<ext-link xlink:href="http://dx.doi.org/10.1029/2000gb001382">10.1029/2000gb001382</ext-link>,
2001.</mixed-citation></ref>
      <ref id="bib1.bibx2"><label>Calle et al.(2009)Calle, Casanova, and Gonzalez-Alonso</label><mixed-citation>
Calle, A., Casanova, J.-L., and Gonzalez-Alonso, F.: Impact of point spread
function of MSG-SEVIRI on active fire detection, Int. J. Remote Sens., 30,
4567–4579, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx3"><label>Chen and Dudhia(2001)</label><mixed-citation>
Chen, F. and Dudhia, J.: Coupling an advanced land surface-hydrology model
with the Penn State-NCAR MM5 modeling system. Part I: Model implementation
and sensitivity, Mon. Weather Rev., 129, 569–585, 2001.</mixed-citation></ref>
      <ref id="bib1.bibx4"><label>Clarisse et al.(2011)Clarisse, R'Honi, Coheur, Hurtmans, and Clerbaux</label><mixed-citation>Clarisse, L., R'Honi, Y., Coheur, P.-F., Hurtmans, D., and Clerbaux, C.: Thermal infrared nadir observations of 24 atmospheric gases, Geophys. Res. Lett., 38, L10802+,
doi:<ext-link xlink:href="http://dx.doi.org/10.1029/2011gl047271">10.1029/2011gl047271</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx5"><label>Clerbaux et al.(2009)Clerbaux, Boynard, Clarisse, George, Hadji-Lazaro, Herbin, Hurtmans, Pommier, Razavi, Turquety, Wespes, and Coheur</label><mixed-citation>Clerbaux, C., Boynard, A., Clarisse, L., George, M., Hadji-Lazaro, J., Herbin, H., Hurtmans, D.,
Pommier, M., Razavi, A., Turquety, S., Wespes, C., and Coheur, P.-F.:
Monitoring of atmospheric composition using the thermal infrared
IASI/MetOp sounder, Atmos. Chem. Phys., 9, 6041–6054, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-9-6041-2009" ext-link-type="DOI">10.5194/acp-9-6041-2009</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx6"><label>Coheur et al.(2009)Coheur, Clarisse, Turquety, Hurtmans, and Clerbaux</label><mixed-citation>Coheur, P.-F., Clarisse, L., Turquety, S., Hurtmans, D., and Clerbaux, C.:
IASI measurements of reactive trace species in biomass burning plumes, Atmos. Chem. Phys., 9, 5655–5667, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-9-5655-2009" ext-link-type="DOI">10.5194/acp-9-5655-2009</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx7"><label>Darmenov and da Silva(2013)</label><mixed-citation>
Darmenov, A. and da Silva, A.: The Quick Fire Emissions Dataset (QFED) – Documentation
of versions 2.1, 2.2 and 2.4, NASA Technical Report Series on Global
Modeling and Data Assimilation, NASA Center for AeroSpace Information, Goddard Space Flight Center, Greenbelt, MD 20771, NASA TM-2013-104606, 32, 183, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx8"><label>Denier van der Gon et al.(2005)Denier van der Gon, van het Bolscher, Visschedijk, and Zandveld</label><mixed-citation>
Denier van der Gon, H., van het Bolscher, M., Visschedijk, A., and
Zandveld, P.: Study to the effectiveness of the UNECE Heavy Metals Protocol
and costs of possible additional measures Phase I: Estimation of emission
reduction resulting from the implementation of the HM Protocol, Apeldoorn,
the Netherlands, TNO (Netherlands Organisation for Applied Scientific
Research), TNO Report B&amp;O-A R 2005, 193, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx9"><label>Dozier(1981)</label><mixed-citation>Dozier, J.: A method for satellite identification of surface temperature
fields of subpixel resolution, Remote Sens. Environ., 11, 221–229,
doi:<ext-link xlink:href="http://dx.doi.org/10.1016/0034-4257(81)90021-3">10.1016/0034-4257(81)90021-3</ext-link>,
1981.</mixed-citation></ref>
      <ref id="bib1.bibx10"><label>Dudhia(1989)</label><mixed-citation>
Dudhia, J.: Numerical study of convection observed during the winter monsoon
experiment using a mesoscale two-dimensional model, J. Atmos. Sci., 46,
3077–3107, 1989.</mixed-citation></ref>
      <ref id="bib1.bibx11"><label>Ellicott et al.(2009)Ellicott, Vermote, Giglio, and Roberts</label><mixed-citation>Ellicott, E., Vermote, E., Giglio, L., and Roberts, G.: Estimating biomass
consumed from fire using MODIS FRE, Geophys. Res. Lett., 36, L13401,
<ext-link xlink:href="http://dx.doi.org/10.1029/2009GL038581" ext-link-type="DOI">10.1029/2009GL038581</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx12"><label>Foley et al.(2010)Foley, Roselle, Appel, Bhave, Pleim, Otte, Mathur, Sarwar, Young, Gilliam et al.</label><mixed-citation>Foley, K. M., Roselle, S. J., Appel, K. W., Bhave, P. V., Pleim, J. E., Otte, T. L.,
Mathur, R., Sarwar, G., Young, J. O., Gilliam, R. C., Nolte, C. G., Kelly, J. T.,
Gilliland, A. B., and Bash, J. O.: Incremental testing of the Community
Multiscale Air Quality (CMAQ) modeling system version 4.7, Geosci. Model Dev., 3, 205–226, <ext-link xlink:href="http://dx.doi.org/10.5194/gmd-3-205-2010" ext-link-type="DOI">10.5194/gmd-3-205-2010</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx13"><label>Garcia-Menendez et al.(2014)Garcia-Menendez, Hu, and Odman</label><mixed-citation>
Garcia-Menendez, F., Hu, Y., and Odman, M. T.: Simulating smoke transport
from wildland fires with a regional-scale air quality model: sensitivity to
spatiotemporal allocation of fire emissions, Sci. Total Environ., 493,
544–553, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx14"><label>Govaerts et al.(2007)Govaerts, Wooster, Lattanzio, and Roberts</label><mixed-citation>
Govaerts, Y., Wooster, M., Lattanzio, A., and Roberts, G.: Fire Radiative
Power (FRP) characterisation Algorithm Theoretical Basis Document: The
EUMETSAT Network of Satellite Application Facilities Lisbon, Portugal,
EUMETSAT, Tech. rep., EUM/MET/SPE/06/0398, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx15"><label>Guenther et al.(2006)Guenther, Karl, Harley, Wiedinmyer, Palmer, Geron et al.</label><mixed-citation>Guenther, A., Karl, T., Harley, P., Wiedinmyer, C., Palmer, P. I., and Geron, C.:
Estimates of global terrestrial isoprene emissions using MEGAN (Model of Emissions
of Gases and Aerosols from Nature), Atmos. Chem. Phys., 6, 3181–3210, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-6-3181-2006" ext-link-type="DOI">10.5194/acp-6-3181-2006</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx16"><label>Heil et al.(2010)Heil, Kaiser, van der Werf, Wooster, Schultz, and van der Gon</label><mixed-citation>
Heil, A., Kaiser, J. W., van der Werf, G. R., Wooster, M. J., Schultz, M. G.,
and van der Gon, H. D.: Assessment of the Real-Time Fire Emissions (GFASv0)
by MACC, European Centre for Medium-Range Weather Forecasts, Reading, UK,
2010.</mixed-citation></ref>
      <ref id="bib1.bibx17"><label>Hogrefe et al.(2001)Hogrefe, Rao, Kasibhatla, Kallos, Tremback, Hao, Olerud, Xiu, McHenry, and Alapaty</label><mixed-citation>
Hogrefe, C., Rao, S. T., Kasibhatla, P., Kallos, G., Tremback, C. J.,
Hao, W., Olerud, D., Xiu, A., McHenry, J., and Alapaty, K.: Evaluating the
performance of regional-scale photochemical modeling systems: Part I –
Meteorological predictions, Atmos. Environ., 35, 4159–4174, 2001.</mixed-citation></ref>
      <ref id="bib1.bibx18"><label>Hong and Lim(2006)</label><mixed-citation>
Hong, S.-Y. and Lim, J.-O. J.: The WRF single-moment 6-class microphysics
scheme (WSM6), J. Korean Meteor. Soc, 42, 129–151, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx19"><label>Hong et al.(2004)Hong, Dudhia, and Chen</label><mixed-citation>
Hong, S.-Y., Dudhia, J., and Chen, S.-H.: A revised approach to ice
microphysical processes for the bulk parameterization of clouds and
precipitation, Mon. Weather Rev., 132, 103–120, 2004.</mixed-citation></ref>
      <ref id="bib1.bibx20"><label>Hurtmans et al.(2012)Hurtmans, Coheur, Wespes, Clarisse, Scharf, Clerbaux, Hadji-Lazaro, George, and Turquety</label><mixed-citation>Hurtmans, D., Coheur, P., Wespes, C., Clarisse, L., Scharf, O., Clerbaux, C.,
Hadji-Lazaro, J., George, M., and Turquety, S.: FORLI radiative transfer and
retrieval code for IASI, J. Quant. Spectrosc. Ra., 113, 1391–1408,
doi:<ext-link xlink:href="http://dx.doi.org/10.1016/j.jqsrt.2012.02.036">10.1016/j.jqsrt.2012.02.036</ext-link>,
2012.</mixed-citation></ref>
      <ref id="bib1.bibx21"><label>Ichoku and Kaufman(2005)</label><mixed-citation>Ichoku, C. and Kaufman, Y.: A method to derive smoke emission rates from
MODIS fire radiative energy measurements, IEEE T. Geosci. Remote, 43,
2636–2649,
doi:<ext-link xlink:href="http://dx.doi.org/10.1109/TGRS.2005.857328">10.1109/TGRS.2005.857328</ext-link>,
2005.</mixed-citation></ref>
      <ref id="bib1.bibx22"><label>Im et al.(2010)Im, Markakis, Unal, Kindap, Poupkou, Incecik, Yenigun, Melas, Theodosi, and Mihalopoulos</label><mixed-citation>
Im, U., Markakis, K., Unal, A., Kindap, T., Poupkou, A., Incecik, S.,
Yenigun, O., Melas, D., Theodosi, C., and Mihalopoulos, N.: Study of a winter
PM episode in Istanbul using the high resolution WRF/CMAQ modeling system,
Atmos. Environ., 44, 3085–3094, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx23"><label>Im et al.(2011)Im, Markakis, Poupkou, Melas, Unal, Gerasopoulos, Daskalakis, Kindap, and Kanakidou</label><mixed-citation>Im, U., Markakis, K., Poupkou, A., Melas, D., Unal, A., Gerasopoulos, E.,
Daskalakis, N., Kindap, T., and Kanakidou, M.: The impact of temperature changes
on summer time ozone and its precursors in the Eastern Mediterranean, Atmos. Chem. Phys., 11, 3847–3864, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-11-3847-2011" ext-link-type="DOI">10.5194/acp-11-3847-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx24"><label>Inness et al.(2013)Inness, Baier, Benedetti, Bouarar, Chabrillat, Clark, Clerbaux, Coheur, Engelen, Errera et al.</label><mixed-citation>Inness, A., Baier, F., Benedetti, A., Bouarar, I., Chabrillat, S., Clark, H., Clerbaux, C.,
Coheur, P., Engelen, R. J., Errera, Q., Flemming, J., George, M., Granier, C., Hadji-Lazaro, J.,
Huijnen, V., Hurtmans, D., Jones, L., Kaiser, J. W., Kapsomenakis, J., Lefever, K.,
Leitão, J., Razinger, M., Richter, A., Schultz, M. G., Simmons, A. J., Suttie, M.,
Stein, O., Thépaut, J.-N., Thouret, V., Vrekoussis, M., Zerefos, C., and the MACC team:
The MACC reanalysis: an 8 yr data set of atmospheric composition, Atmos. Chem. Phys., 13, 4073–4109, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-13-4073-2013" ext-link-type="DOI">10.5194/acp-13-4073-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx25"><label>JRC(2008)</label><mixed-citation>JRC: Forest Fires in Europe 2007. JRC Scientific and Technical Reports, Tech.
Rep. EUR 23492, Joint Research Centre, Ispra, Italy., available at:
<uri>http://forest.jrc.ec.europa.eu/media/cms_page_media/9/forest-fires-in-europe-2008.pdf</uri>
(last access: 25 September 2014), 2008.</mixed-citation></ref>
      <ref id="bib1.bibx26"><label>JRC(2009)</label><mixed-citation>JRC: Forest Fires in Europe 2008. JRC Scientific and Technical Reports, Tech.
Rep. EUR 23971, Joint Research Centre, Ispra, Italy, available at:
<uri>http://forest.jrc.ec.europa.eu/media/cms_page_media/9/forest-fires-in-europe-2009.pdf</uri>
(last access: 30 September 2014), 2009.</mixed-citation></ref>
      <ref id="bib1.bibx27"><label>Kain(2004)</label><mixed-citation>
Kain, J. S.: The Kain–Fritsch convective parameterization: an update, J.
Appl. Meteorol., 43, 170–181, 2004.</mixed-citation></ref>
      <ref id="bib1.bibx28"><label>Kaiser et al.(2009)Kaiser, Boucher, Doutriaux-Boucher, Flemming, GOVAERTS, Gulliver, Heil, Jones, Lattanzio, Morcrette et al.</label><mixed-citation>
Kaiser, J. W., Boucher, O., Doutriaux-Boucher, M., Flemming, J., GOVAERTS, Y.
M., Gulliver, J., Heil, A., Jones, L., Lattanzio, A., Morcrette, J.-J.,
Perrone, M. R., Razinger, M., Roberts, G., Schultz, M. G., Simmons, A. J.,
Suttie, M., and Wooster, M. J.: Smoke in the air, ECMWF Newsletter, 119,
9–15, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx29"><label>Kaiser et al.(2012)Kaiser, Heil, Andreae, Benedetti, Chubarova, Jones, Morcrette, Razinger, Schultz, Suttie et al.</label><mixed-citation>Kaiser, J. W., Heil, A., Andreae, M. O., Benedetti, A., Chubarova, N., Jones, L.,
Morcrette, J.-J., Razinger, M., Schultz, M. G., Suttie, M., and van der Werf, G. R.:
Biomass burning emissions estimated with a global fire assimilation system based
on observed fire radiative power, Biogeosciences, 9, 527–554, <ext-link xlink:href="http://dx.doi.org/10.5194/bg-9-527-2012" ext-link-type="DOI">10.5194/bg-9-527-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx30"><label>Kavgacı et al.(2010)Kavgacı, Čarni, Başaran, Başaran, Košir, Marinšek, and Šilc</label><mixed-citation>
Kavgacı, A., Čarni, A., Başaran, S., Başaran, M. A.,
Košir, P., Marinšek, A., and Šilc, U.: Long-term post-fire
succession of Pinus brutia forest in the east Mediterranean, Int. J. Wildland
Fire, 19, 599–605, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx31"><label>Kelly et al.(2009)Kelly, Bhave, Nolte, Shankar, and Foley</label><mixed-citation>Kelly, J. T., Bhave, P. V., Nolte, C. G., Shankar, U., and Foley, K. M.:
Simulating emission and chemical evolution of coarse sea-salt particles in the
Community Multiscale Air Quality (CMAQ) model, Geosci. Model Dev., 3, 257–273, <ext-link xlink:href="http://dx.doi.org/10.5194/gmd-3-257-2010" ext-link-type="DOI">10.5194/gmd-3-257-2010</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx32"><label>Kindap et al.(2006)Kindap, Unal, Chen, Hu, Odman, and Karaca</label><mixed-citation>
Kindap, T., Unal, A., Chen, S.-H., Hu, Y., Odman, M., and Karaca, M.:
Long-range aerosol transport from Europe to Istanbul, Turkey, Atmos.
Environ., 40, 3536–3547, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx33"><label>Konovalov et al.(2014)Konovalov, Berezin, Ciais, Broquet, Beekmann, Hadji-Lazaro, Clerbaux, Andreae, Kaiser, Schulze et al.</label><mixed-citation>Konovalov, I. B., Berezin, E. V., Ciais, P., Broquet, G., Beekmann, M., Hadji-Lazaro, J.,
Clerbaux, C., Andreae, M. O., Kaiser, J. W., and Schulze, E.-D.: Constraining CO<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msub></mml:math></inline-formula>
emissions from open biomass burning by satellite observations of co-emitted
species: a method and its application to wildfires in Siberia, Atmos. Chem. Phys., 14, 10383–10410, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-14-10383-2014" ext-link-type="DOI">10.5194/acp-14-10383-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx34"><label>Laneve et al.(2006)Laneve, Castronuovo, and Cadau</label><mixed-citation>
Laneve, G., Castronuovo, M. M., and Cadau, E. G.: Continuous monitoring of
forest fires in the Mediterranean area using MSG, IEEE T. Geosci. Remote, 44,
2761–2768, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx35"><label>Lattanzio et al.(2009)Lattanzio, Wooster, and Freeborn</label><mixed-citation>
Lattanzio, A., Wooster, M., and Freeborn, P.: LSA SAF Product User Manual:
FRP, The EUMETSAT Network of Satellite Application Facilities, Lisbon,
Portugal, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx36"><label>Levy et al.(2007)Levy, Remer, Mattoo, Vermote, and Kaufman</label><mixed-citation>Levy, R. C., Remer, L. A., Mattoo, S., Vermote, E. F., and Kaufman, Y. J.:
Second-generation operational algorithm: retrieval of aerosol properties over
land from inversion of Moderate Resolution Imaging Spectroradiometer spectral
reflectance, J. Geophys. Res.-Atmos., 112, D13211,
<ext-link xlink:href="http://dx.doi.org/10.1029/2006JD007811" ext-link-type="DOI">10.1029/2006JD007811</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx37"><label>Malm et al.(1994)Malm, Sisler, Huffman, Eldred, and Cahill</label><mixed-citation>
Malm, W. C., Sisler, J. F., Huffman, D., Eldred, R. A., and Cahill, T. A.:
Spatial and seasonal trends in particle concentration and optical extinction in the United States, J. Geophys. Res.-Atmos., 99, 1347–1370, 1994.</mixed-citation></ref>
      <ref id="bib1.bibx38"><label>Migliavacca et al.(2013)Migliavacca, Dosio, Camia, Hobourg, Houston-Durrant, Kaiser, Khabarov, Krasovskii, Marcolla, Miguel-Ayanz et al.</label><mixed-citation>
Migliavacca, M., Dosio, A., Camia, A., Hobourg, R., Houston-Durrant, T.,
Kaiser, J. W., Khabarov, N., Krasovskii, A. A., Marcolla, B., Miguel-Ayanz,
S., Ward, D. S., and Cescatti, A.: Modeling biomass burning and related
carbon emissions during the 21st century in Europe, J. Geophys. Res.-Biogeo.,
118, 1732–1747, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx39"><label>Mlawer et al.(1997)Mlawer, Taubman, Brown, Iacono, and Clough</label><mixed-citation>
Mlawer, E. J., Taubman, S. J., Brown, P. D., Iacono, M. J., and
Clough, S. A.: Radiative transfer for inhomogeneous atmospheres: RRTM, a
validated correlated-k model for the longwave, J. Geophys. Res.-Atmos., 102,
16663–16682, 1997.</mixed-citation></ref>
      <ref id="bib1.bibx40"><label>Morcrette et al.(2007)Morcrette, Jones, Kaiser, Benedetti, and Boucher</label><mixed-citation>
Morcrette, J. J., Jones, L., Kaiser, J., Benedetti, A., and Boucher, O.:
Toward a forecast of aerosols with the ECMWF Integrated Forecast System, ECMWF Newsl, 114, 15–17, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx41"><label>Odman et al.(2007)Odman, Hu, Unal, Russell, and Boylan</label><mixed-citation>
Odman, M. T., Hu, Y., Unal, A., Russell, A. G., and Boylan, J. W.:
Determining the sources of regional haze in the southeastern United States
using the CMAQ model, J. Appl. Meteorol. Clim., 46, 1731–1743, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx42"><label>Otte and Pleim(2010)</label><mixed-citation>Otte, T. L. and Pleim, J. E.: The Meteorology-Chemistry Interface Processor
(MCIP) for the CMAQ modeling system: updates through MCIPv3.4.1, Geosci. Model Dev., 3, 243–256, <ext-link xlink:href="http://dx.doi.org/10.5194/gmd-3-243-2010" ext-link-type="DOI">10.5194/gmd-3-243-2010</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx43"><label>Poupkou et al.(2014)Poupkou, Markakis, Liora, Giannaros, Zanis, Im, Daskalakis, Myriokefalitakis, Kaiser, Melas et al.</label><mixed-citation>Poupkou, A., Markakis, K., Liora, N., Giannaros, T., Zanis, P., Im, U.,
Daskalakis, N., Myriokefal- itakis, S., Kaiser, J., Melas, D., Kanakidou, M.,
Karacostas, T., and Zerefos, C.: A modeling study of the impact of the 2007
Greek forest fires on the gaseous pollutant levels in the Eastern
Mediterranean, Atmos. Res., 148, 1–17, <ext-link xlink:href="http://dx.doi.org/10.1016/j.atmosres.2014.05.015" ext-link-type="DOI">10.1016/j.atmosres.2014.05.015</ext-link>,
2014.</mixed-citation></ref>
      <ref id="bib1.bibx44"><label>Prins(2001)</label><mixed-citation>
Prins, E.: Overview of current and future diurnal active fire monitoring
using a suite of international geostationary satellites, Global and Regional
Wildfire Monitoring: Current Status and Future Plans, edited by:
Ahern, F. J., Goldammer, J. G., and Justice, C. O., SPB Acad., The Hague, the
Netherlands, 145–170, 2001.</mixed-citation></ref>
      <ref id="bib1.bibx45"><label>Prins and Menzel(1992)</label><mixed-citation>
Prins, E. M. and Menzel, W.: Geostationary satellite detection of bio mass
burning in South America, Int. J. Remote Sens., 13, 2783–2799, 1992.</mixed-citation></ref>
      <ref id="bib1.bibx46"><label>Prins and Menzel(1994)</label><mixed-citation>
Prins, E. M. and Menzel, W. P.: Trends in South American biomass burning
detected with the GOES visible infrared spin scan radiometer atmospheric
sounder from 1983 to 1991, J. Geophys. Res.-Atmos., 99, 16719–16735, 1994.</mixed-citation></ref>
      <ref id="bib1.bibx47"><label>Reid et al.(2009)et al.</label><mixed-citation> Reid, J. S., Hyer, E. J., Prins, E. M.,
Westphal, D. L., Zhang, J., Wang, J., Christopher, S. A., Curtis, C. A., Schmidt, C. C., and Eleuterio, D. P.:
Global monitoring and forecasting of biomass-burning smoke: Description of and lessons from the Fire Locating and
Modeling of Burning Emissions (FLAMBE) program, Selected Topics in Applied Earth Observations and Remote Sensing, IEEE J.,
3, 144–162, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx48"><label>Remer et al.(2005)Remer, Kaufman, Tanré, Mattoo, Chu,
Martins, Li, Ichoku, Levy, Kleidman et al.</label><mixed-citation> Remer, L. A.,
Kaufman, Y., Tanré, D., Mattoo, S., Chu, D., Martins, J. V., Li, R.-R.,
Ichoku, C., Levy, R., Kleidman, R., Eck, T. F., Vermote, E., and Holben, B.
N.: The MODIS aerosol algorithm, products, and validation, J. Atmos. Sci.,
62, 947–973, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx49"><label>Roberts and Wooster(2008)</label><mixed-citation>Roberts, G. J. and Wooster, M. J.: Fire detection and fire characterization
over Africa using Meteosat SEVIRI, IEEE Trans. Geosci. Remote Sens., 46,
1200–1218, <ext-link xlink:href="http://dx.doi.org/10.1109/TGRS.2008.915751" ext-link-type="DOI">10.1109/TGRS.2008.915751</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx50"><label>Roberts et al.(2005)Roberts, Wooster, Perry, Drake, Rebelo, and Dipotso</label><mixed-citation>Roberts, G., Wooster, M. J., Perry, G. L., Drake, N., Rebelo, L.-M., and
Dipotso, F.: Retrieval of biomass combustion rates and totals from fire
radiative power observations: application to southern Africa using
geostationary SEVIRI imagery, J. Geophys. Res.-Atmos., 110, D21111,
<ext-link xlink:href="http://dx.doi.org/10.1029/2005JD006018" ext-link-type="DOI">10.1029/2005JD006018</ext-link>, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx51"><label>Roberts et al.(2009)Roberts, Wooster, and Lagoudakis</label><mixed-citation>Roberts, G., Wooster, M. J., and Lagoudakis, E.: Annual and diurnal
african biomass burning temporal dynamics, Biogeosciences, 6, 849–866, <ext-link xlink:href="http://dx.doi.org/10.5194/bg-6-849-2009" ext-link-type="DOI">10.5194/bg-6-849-2009</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx52"><label>Roberts et al.(2015)Roberts, Wooster, Xu, Freeborn, Morcrette, Jones, Benedetti, and Kaiser</label><mixed-citation>Roberts, G., Wooster, M. J., Xu, W., Freeborn, P. H., Morcrette, J.-J., Jones, L.,
Benedetti, A., and Kaiser, J.: LSA SAF Meteosat FRP Products: Part 2 –
Evaluation and demonstration of use in the Copernicus Atmosphere
Monitoring Service (CAMS), Atmos. Chem. Phys. Discuss., 15, 15909–15976, <ext-link xlink:href="http://dx.doi.org/10.5194/acpd-15-15909-2015" ext-link-type="DOI">10.5194/acpd-15-15909-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bibx53"><label>Rodgers(2000)</label><mixed-citation>
Rodgers, C. D.: Inverse Methods for Atmospheric Sounding: Theory and
Practice, vol. 2, World Scientific, Singapore, 2000.</mixed-citation></ref>
      <ref id="bib1.bibx54"><label>Schultz and Wooster(2008)</label><mixed-citation>
Schultz, M. and Wooster, M.: Evaluation of a fire radiative power product
derived from Meteosat 8/9 and identification of operational user needs, Final
report to EUMETSAT contract, Jülich, Forschungszentrum Jülich,
Zentralbibliothek, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx55"><label>Sifakis et al.(2011)Sifakis, Iossifidis, Kontoes, and Keramitsoglou</label><mixed-citation>
Sifakis, N. I., Iossifidis, C., Kontoes, C., and Keramitsoglou, I.: Wildfire
detection and tracking over Greece using MSG-SEVIRI satellite data, Remote
Sens., 3, 524–538, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx56"><label>Skamarock and Klemp(2008)</label><mixed-citation>
Skamarock, W. C. and Klemp, J. B.: A time-split nonhydrostatic atmospheric
model for weather research and forecasting applications, J. Comp. Phys., 227,
3465–3485, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx57"><label>Sofiev et al.(2009)Sofiev, Vankevich, Lotjonen, Prank, Petukhov, Ermakova, Koskinen, and Kukkonen</label><mixed-citation>Sofiev, M., Vankevich, R., Lotjonen, M., Prank, M., Petukhov, V., Ermakova, T., Koskinen, J.,
and Kukkonen, J.: An operational system for the assimilation of the satellite
information on wild-land fires for the needs of air quality modelling and
forecasting, Atmos. Chem. Phys., 9, 6833–6847, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-9-6833-2009" ext-link-type="DOI">10.5194/acp-9-6833-2009</ext-link>, 2009.
</mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bibx58"><label>Sofiev et al.(2012)Sofiev, Ermakova, and Vankevich</label><mixed-citation>Sofiev, M., Ermakova, T., and Vankevich, R.: Evaluation of the smoke-injection
height from wild-land fires using remote-sensing data, Atmos. Chem. Phys., 12, 1995–2006, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-12-1995-2012" ext-link-type="DOI">10.5194/acp-12-1995-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx59"><label>Stoyanova et al.(2008)Stoyanova, Georgiev, Yordanova, and Mladenov</label><mixed-citation>
Stoyanova, J., Georgiev, C., Yordanova, D., and Mladenov, K.: Active fire
monitoring over Bulgaria: validation of SEVIRI FIR product, in: EUMETSAT
Meteorological Satellite Conference, Darmstadt, Germany, 8–12, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx60"><label>Tolika et al.(2012)Tolika, Zanis, and Anagnostopoulou</label><mixed-citation>
Tolika, C., Zanis, P., and Anagnostopoulou, C.: Regional climate change
scenarios for Greece: future temperature and precipitation projections from
ensembles of RCMs, Global NEST J., 14, 407–421, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx61"><label>Turquety et al.(2009)Turquety, Hurtmans, Hadji-Lazaro, Coheur, Clerbaux, Josset, and Tsamalis</label><mixed-citation>Turquety, S., Hurtmans, D., Hadji-Lazaro, J., Coheur, P.-F., Clerbaux, C., Josset, D.,
and Tsamalis, C.: Tracking the emission and transport of pollution from
wildfires using the IASI CO retrievals: analysis of the summer 2007
Greek fires, Atmos. Chem. Phys., 9, 4897–4913, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-9-4897-2009" ext-link-type="DOI">10.5194/acp-9-4897-2009</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx62"><label>Unal et al.(2005)Unal, Hu, Chang, Talat Odman, and Russell</label><mixed-citation>
Unal, A., Hu, Y., Chang, M. E., Talat Odman, M., and Russell, A. G.: Airport
related emissions and impacts on air quality: application to the Atlanta
International Airport, Atmos. Environ., 39, 5787–5798, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx63"><label>Van Damme et al.(2014)Van Damme, Clarisse, Heald, Hurtmans, Ngadi, Clerbaux, Dolman, Erisman, and Coheur</label><mixed-citation>Van Damme, M., Clarisse, L., Heald, C. L., Hurtmans, D., Ngadi, Y., Clerbaux, C.,
Dolman, A. J., Erisman, J. W., and Coheur, P. F.: Global distributions, time series
and error characterization of atmospheric ammonia (NH<inline-formula><mml:math display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msub></mml:math></inline-formula>) from IASI satellite
observations, Atmos. Chem. Phys., 14, 2905–2922, <ext-link xlink:href="http://dx.doi.org/10.5194/acp-14-2905-2014" ext-link-type="DOI">10.5194/acp-14-2905-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx64"><label>Walker et al.(2011)Walker, Dudhia, and Carboni</label><mixed-citation>Walker, J. C., Dudhia, A., and Carboni, E.: An effective method for the detection
of trace species demonstrated using the MetOp Infrared Atmospheric Sounding
Interferometer, Atmos. Meas. Tech., 4, 1567–1580, <ext-link xlink:href="http://dx.doi.org/10.5194/amt-4-1567-2011" ext-link-type="DOI">10.5194/amt-4-1567-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx65"><label>Wooster et al.(2003)Wooster, Zhukov, and Oertel</label><mixed-citation>
Wooster, M. J., Zhukov, B., and Oertel, D.: Fire radiative energy for
quantitative study of biomass burning: derivation from the BIRD experimental
satellite and comparison to MODIS fire products, Remote Sens. Environ., 86,
83–107, 2003.</mixed-citation></ref>
      <ref id="bib1.bibx66"><label>Wooster et al.(2015)Wooster, Roberts, Freeborn, Xu, Govaerts, Beeby, He, Lattanzio, and Mullen</label><mixed-citation>Wooster, M. J., Roberts, G., Freeborn, P. H., Xu, W., Govaerts, Y., Beeby, R., He, J.,
Lattanzio, A., and Mullen, R.: Meteosat SEVIRI Fire Radiative Power (FRP) products
from the Land Surface Analysis Satellite Applications Facility (LSA SAF) – Part 1:
Algorithms, product contents and analysis, Atmos. Chem. Phys. Discuss., 15, 15831–15907, <ext-link xlink:href="http://dx.doi.org/10.5194/acpd-15-15831-2015" ext-link-type="DOI">10.5194/acpd-15-15831-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bibx67"><label>Yang et al.(2011)Yang, Christopher, Kondragunta, and Zhang</label><mixed-citation>Yang, E.-S., Christopher, S. A., Kondragunta, S., and Zhang, X.: Use of
hourly Geostationary Operational Environmental Satellite (GOES) fire
emissions in a Community Multiscale Air Quality (CMAQ) model for improving
surface particulate matter predictions, J. Geophys. Res.-Atmos., 116, D04303,
<ext-link xlink:href="http://dx.doi.org/10.1029/2010JD014482" ext-link-type="DOI">10.1029/2010JD014482</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx68"><label>Yarwood et al.(2005)Yarwood, Rao, Yocke, and Whitten</label><mixed-citation>Yarwood, G., Rao, S., Yocke, M., and Whitten, G.: Updates to the Carbon Bond
Chemical Mechanism: CB05, Final Report to the US EPA, RT-0400675, available
at: <uri>http://www.camx.com/publ/pdfs/cb05_final_report_120805.pdf</uri> (last
access: 16 December 2014), 2005.</mixed-citation></ref>

  </ref-list><app-group content-type="float"><app><title/>

    </app></app-group></back>
    </article>
